When I updated to 10.4.10, had problems with wireless. Able to fix problem

I have a mac mini G4 since Sep 06. I had no problems with wireless until I updated to 10.4.10. My problem was I could only connect to the internet for about 10 minutes then it would not respond. I had to turn off airport then turn it back on then it would work for about 10 more minutes. I have AT&T DSL, speed stream 4100 modem, and D Link 524 router. I went to D Link web site and found out when I use encryption WEP,WPA,ETC. it has to be hexadecimal key with dollar sign ($) before the hex key (Apple computers only). Before the update, I only used password with no problems for about 9 months. Instead of using a password use 64 bit encryption its 10 hexadecimal key or 128 bit encryption its 26 hexadecimal key. Valid hexadecimal characters are 0-9 and A-F. Example of 64 bit key is $0123456789 instead of password. After I did this, I been on the internet for hours with no problems. I hope this info can help out.

Take a look through some of the other threads in this forum. Almost 100% of Safari 3 trouble after the OS X 10.4.11 update is caused by third party plugins, extensions, and input managers. Check in these folders and report back what you have in them.
/Library/Internet Plug-Ins (this is the Library folder in the top level of your hard drive)
~/Library/Internet Plug-Ins (this is the Library folder located in your Home (username) folder)
/Library/Input Managers
~/Library/Input Managers
Or if you know that you have installed some third party stuff along the way try un-installing them. Again, read some of the other threads here to see who the main suspects are. Once you know what is causing your trouble then, if you still want to use the third party plug-in, go to a site like [Version Tracker|www.versiontracker.com] and look for updated versions that work with Safari 3.

Similar Messages

  • When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    Hello,
    Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?

    I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?

    mahtab2 wrote:
    I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • TS1559 I have problem with my iPhone 4s, the problem is i can't turn on wifi, when i go to the setting then to the general and then to the about, i see there is wifi address for my iPhone but still i can't turn it on, please help me

    I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.

    Hello Pllumb,
    It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the s

    I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.

    Hello Pllumb,
    It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

    When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
    In i-Movie there is no problem with  this film, but the problem begins by exporting to iDVD and making there a project.
    Who can help me, then I cann't find everything about this in any forum?

    Hi
    Can be a problem that get multiplied and visible when iDVD encode for DVD.
    A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
    B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
    C. Does this problem arises what ever encoding quality You use ?
    Yours Bengt W

  • TS3276 when I use cable my mail does not work. with wireless ok

    when I use cable my mail does not work. with wireless ok

    Unpower and restart it.  If that doesn't help, try holding menu and left navigation keys TOGETHER for 6 secs.
    AC

  • When i updated itunes I lost all my music, I was able to retrieve it from my previous version, but now a artists have all of their songs list under one unknown cd.  How can I seperate these cds with the correct songs included?

    When I updated itunes I lost all of my music, I was able to retrieve it from a previous itunes library, but now some artists have all of their songs listed under one "unknown album."  Is there a way to separate these songs back into the correct albums?  Also, is there a way to make songs that have a featured guest just show up with the rest of the album instead of making a whole new spot for it?  Thanks!

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • Am getting message saying something is trying to upload unsecure update for Firefox. Have scanned system with Avast but no reported problems

    During a browsing session looking for spares for garden machinery I got a message saying something was trying to upload an unsecure update to Firefox. Have scanned system with Avast and a couple of other malware programs but have no reported threats. As far as I am aware my browser is fully up to date.

    This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.<br />
    Do a clean reinstall and be sure to remove the Firefox program folder.<br />
    See also:
    * [/questions/826858]
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Problems with Wireless connection AFTER 10.4.2 update

    I have read several topics on wireless problems AFTER the 10.4.2 update and wondering if anyone (or Apple) has found a fix to this problem. I cant get to my network or the internet via airport. I have tried zapping the pram, resetting the permissions, rebooting, checking for more update on a wired connection, reinstalling both 10.4.2 combo and 4.2 update and still nothing. This happened RIGHT after the reboot upon completion of the update. Im stuck and wondering if anyone has a solution or has any one SUCCESSFULLY contacted Apple and have they got a solution to fix the problem??

    I'm having the same problems with accessing my airport base station (first generation snow at 4.0.9) after loading the airport admin 4.2 patch. I loaded the 4.2 patch on my g5 and G4 running 10.3.9. The response/across of the wifi connection is very poor. I can't use chicken of the VNC to manage the G4 from the G5 anymore at all due to the slow response and accessing the internet via either the G4 or the G5 is like a dial up connection. The broadband speed test results are 192mb to 274mb up and similar down.
    I have a 12"powerbook (DVI 1gig version) with 10.3.9 that I have not loaded the 4.2 patch on and I am not having any issues with wifi access to the base station or the internet. broadband logs in right at 2.8mb via DSL. I also have a Dell laptop that I access the internet through the airport base station and I have no issues with speed and the same 2.8mb broadband speed test results.
    Conclusion something in the airport 4.2 patch has changed the airport cards ability to see the base station.
    With all that said, my question is - How do I back out of the 4.2 airport admin patch provided by apple or how do I resolve the slow response times between the airport cards in the G4 and G5 and the base station?
    Any help?

  • My iMessage and FaceTime deactivated theirselves when I updated to iOS8.2, why is this and hiw can I fix this

    I recently updated my iPhone 5c to iOS 8.2 and when to iMessage someone it wouldnt send & said I needed to turn on iMessage. So I went to my setting and it had been desctivated as well as FaceTime. I trued to turn both of them on and it says "waiting for activation" how to I "activate" or fix this problem?

    There is no way to consolidate iTunes accounts.
    Setting up an iPhone has never required creation of a new Apple ID.
    You've apparently purchased content with both Apple ID's.  Sign into the device with the correct Apple ID and sync the content.

  • When I update Adobe DPS to version 29 will I be able to publish something in version 27?

    I am also working in CS 5, will I need to update to CS6 to update to v29? Also, how does updating effect ipad one users/subscribers?

    Panels refers to DPS tools, yes. Viewer refers to the thing you submit to the store.
    There is no requirement that you update your viewer in the store when we release a new version of our tools. All you need to do is update the tools in InDesign and you can continue to publish folios with a target viewer version of 27 to your existing viewers in the store.
    If you choose to update your viewer for some reason you will need to update it to version 28 or 29. That is just for the viewer itself though. All your old folios will contiune to work, and you can continue to create folios with a target viewer verson of 27.
    You should NOT change the target viewer version of your folios unless you also update your application in the store. Otherwise your readers won't be able to open them
    Neil

  • Why can't my 5S find my bluetooth devices when I had no problem with 4S? any fix?

    Brand new 5S not finding any of my Bluetooth devices. Never had an issue with my 4S. Any sugestions on how to fix without buying new devices?

    Brand new 5S not finding any of my Bluetooth devices. Never had an issue with my 4S. Any sugestions on how to fix without buying new devices?

  • HAS ANYONE HAD A PROBLEM WITH WIRELESS PRINTING ERROR RASTER FILE FAILED

    My printer displays error message - opening raster file failed.  Has anyone had this happen?

    Lightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
    Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Problems with Wireless since last update of NetworkManager

    Hello Everyone,
    Yesterday I updated NetworkManager (and also, wpa_supplicant if I remember right, and kdeplasma-applets-networkmanagement). The problem now is that I connect to my Wireless and then after a few seconds (maybe 1minute max), I can't use my internet connection anymore, but the applet says that it is still connected. To make it work again I need to disconnect and then re-connect again.
    Here are the information I can give :
    lspci
    03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network
    Kernel.log
    Sep 10 19:10:02 localhost kernel: [ 1324.198049] wlan0: authenticate with 2c:b0:5d:b8:76:b2
    Sep 10 19:10:02 localhost kernel: [ 1324.210490] wlan0: send auth to 2c:b0:5d:b8:76:b2 (try 1/3)
    Sep 10 19:10:02 localhost kernel: [ 1324.212868] wlan0: authenticated
    Sep 10 19:10:02 localhost kernel: [ 1324.219892] wlan0: associate with 2c:b0:5d:b8:76:b2 (try 1/3)
    Sep 10 19:10:02 localhost kernel: [ 1324.223747] wlan0: RX AssocResp from 2c:b0:5d:b8:76:b2 (capab=0x411 status=0 aid=1)
    Sep 10 19:10:02 localhost kernel: [ 1324.223829] wlan0: associated
    Errors.log
    Sep 10 18:48:09 localhost /usr/sbin/crond[435]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
    Sep 10 18:48:10 localhost NetworkManager[401]: <error> [1347299290.630837] [wifi-utils-nl80211.c:669] nl80211_wiphy_info_handler(): Don't know the meaning of NL80211_ATTR_CIPHER_SUITES 0x000fac06.
    Sep 10 18:48:19 localhost kdm_greet[563]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
    Sep 10 18:48:45 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:48:46 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:54:24 localhost kernel: [ 385.834000] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 18:54:24 localhost kernel: [ 385.834011] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 18:54:27 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:54:36 localhost dhclient: can't create /var/lib/dhclient/dhclient-510854b1-14d2-4151-beb1-051d264b184d-wlan0.lease: No such file or directory
    Sep 10 18:56:06 localhost kernel: [ 487.895676] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 18:56:06 localhost kernel: [ 487.895686] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:20 localhost kernel: [ 741.590311] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:20 localhost kernel: [ 741.590324] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:20 localhost kernel: [ 741.590329] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:00:43 localhost kernel: [ 765.332093] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:04:52 localhost kernel: [ 1014.346686] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 10 19:04:52 localhost kernel: [ 1014.346696] ath: phy0: TX while HW is in FULL_SLEEP mode
    [maria@Maria-PC ~]$ iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"CABOVISAO-EA70"
    Mode:Managed Frequency:2.412 GHz Access Point: 2C:B0:5D:B8:76:B2
    Bit Rate=39 Mb/s Tx-Power=16 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=44/70 Signal level=-66 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:4 Missed beacon:0
    Thanks in Advance,
    Luis Da Costa

    Similar symptoms here. However, my problem was not solved by downgrading networkmanager (tried to networkmanager-0.9.4.0-6, same issue here).
    nm-applet correctly lists available interfaces and tries to authenticate to my AP, gets an IP right away but straight after I lose it and then it looks like it's trying to reconnect for a long time. Sometimes it seems like I connected after a while and get an IP, but can't really do anything except ping my own IP.
    lspci:
    03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    rfkill list:
    0: asus-wlan: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    1: asus-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
    2: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
    errors.log:
    Sep 11 10:45:13 localhost NetworkManager[1770]: <error> [1347353113.507334] [wifi-utils-nl80211.c:669] nl80211_wiphy_info_handler(): Don't know the meaning of NL80211_ATTR_CIPHER_SUITES 0x000fac06.
    Sep 11 10:45:13 localhost dhcpcd[1775]: eth0: sendmsg: Cannot assign requested address
    Sep 11 10:45:14 localhost kernel: [  926.006420] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:15 localhost dhcpcd[1816]: wlan0: sendmsg: Cannot assign requested address
    Sep 11 10:45:25 localhost kernel: [  937.115320] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115335] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115340] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.124019] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.124534] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:37 localhost kernel: [  949.224720] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:37 localhost kernel: [  949.227004] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:40 localhost kernel: [  951.331039] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:40 localhost kernel: [  951.331753] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:41 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Sep 11 10:45:52 localhost kernel: [  964.248318] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:52 localhost kernel: [  964.248936] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:04 localhost kernel: [  975.841375] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:04 localhost kernel: [  975.841916] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:08 localhost kernel: [  980.055647] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:08 localhost kernel: [  980.056881] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:10 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Sep 11 10:46:24 localhost kernel: [  996.151206] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:24 localhost kernel: [  996.152140] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:36 localhost kernel: [ 1008.052517] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:36 localhost kernel: [ 1008.053539] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:41 localhost NetworkManager[1770]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Sep 11 10:46:52 localhost kernel: [ 1024.155202] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:46:52 localhost kernel: [ 1024.155824] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:47:04 localhost kernel: [ 1035.752317] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:47:04 localhost kernel: [ 1035.753108] ath: phy0: TX while HW is in FULL_SLEEP mode
    kernel.log:
    Sep 11 10:45:13 localhost kernel: [  924.885910] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Sep 11 10:45:14 localhost kernel: [  925.939685] wlan0: authenticate with 00:16:a6:12:e0:b0
    Sep 11 10:45:14 localhost kernel: [  925.952192] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:14 localhost kernel: [  925.954290] wlan0: authenticated
    Sep 11 10:45:14 localhost kernel: [  925.961756] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:14 localhost kernel: [  925.966830] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
    Sep 11 10:45:14 localhost kernel: [  925.968369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Sep 11 10:45:14 localhost kernel: [  925.968430] wlan0: associated
    Sep 11 10:45:14 localhost kernel: [  925.976822] wlan0: disassociating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:14 localhost kernel: [  926.005689] cfg80211: Calling CRDA to update world regulatory domain
    Sep 11 10:45:14 localhost kernel: [  926.006412] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:14 localhost kernel: [  926.006420] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:15 localhost kernel: [  927.055728] wlan0: authenticate with 00:16:a6:12:e0:b0
    Sep 11 10:45:15 localhost kernel: [  927.068456] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:15 localhost kernel: [  927.071092] wlan0: authenticated
    Sep 11 10:45:15 localhost kernel: [  927.081434] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:15 localhost kernel: [  927.086812] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
    Sep 11 10:45:15 localhost kernel: [  927.087724] wlan0: associated
    Sep 11 10:45:25 localhost kernel: [  937.086690] wlan0: disassociating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:25 localhost kernel: [  937.115320] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115335] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.115340] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.122145] cfg80211: Calling CRDA to update world regulatory domain
    Sep 11 10:45:25 localhost kernel: [  937.123996] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:25 localhost kernel: [  937.124019] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:25 localhost kernel: [  937.124517] wlan0: deauthenticating from 00:16:a6:12:e0:b0 by local choice (reason=3)
    Sep 11 10:45:25 localhost kernel: [  937.124534] ath: phy0: TX while HW is in FULL_SLEEP mode
    Sep 11 10:45:27 localhost kernel: [  939.175379] wlan0: authenticate with 00:16:a6:12:e0:b0
    Sep 11 10:45:27 localhost kernel: [  939.187967] wlan0: send auth to 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:27 localhost kernel: [  939.190312] wlan0: authenticated
    Sep 11 10:45:27 localhost kernel: [  939.197572] wlan0: associate with 00:16:a6:12:e0:b0 (try 1/3)
    Sep 11 10:45:27 localhost kernel: [  939.201946] wlan0: RX AssocResp from 00:16:a6:12:e0:b0 (capab=0x411 status=0 aid=3)
    Sep 11 10:45:27 localhost kernel: [  939.203598] wlan0: associated
    All with latest network-manager. I might add that it was some months since I actually used wireless on this computer.

Maybe you are looking for

  • How to save BI report into normal excel sheet in Bex Analyzer

    Hi Experts, version of  Bex Analyzer: Bi addon 7.x support package 7,patch 1 version 7004.4.0.5 excel-2003 when i am trying to save the report into excel in Bex Analyzer as below: file-save as->Microsoft excel work. when I open excel I am getting pop

  • Problem creating user in RDBMS realm Using com.bea.wlpi.rdbmsrealm.RDBMSRealm

    Hi, I am currently using WLI 2.0 SP2 installation. Here is a very unusual thing I noticed. Can somebody tell me what is going on ??? 1 : I have set up the security realm as indicated in the config.xml file. As far as I understand, the caching realm e

  • Installing Java

    Hello, I went here: www.java.com To see what was there, as I was curious, I clicked Do I Have Java? It said I do, but I had 1.6.0 while the recommended version was 6u5 or something. I downloaded the Java from the www.java.com Read the setup guide and

  • Multi line support UCCX

    Normal an agent only has  DN on line 1 which is their ACD line however there may be a need to have the following Scenario A Line 1 ACD Line 2 Non ACD Scenario B Line 1 Non ACD Line 2 ACD How does UCCX react  If the agent is on an active Line 2 call w

  • Error Message when loggin on using indonesion language

    Hi Experts, when I log on into SAP CRM Webclient with language ID (Indonesian) I got a error message in the header (where normally the SAP Logo is) that says: Fehler bei der Verarbeitung Ihrer Anfrage Was ist passiert ? Der Aufruf der URL http://tst-