When i upgraded windows 7 to windows 8, Photosop cs6 3D does not work anymore.
Do y'll guys had any problem like this before?
Hi,
Look at the video card drivers from you card manufacturer and make sure you have updates for Win8.
regards,
steve
Similar Messages
-
Windows 7 professional with Windows Media Player 11 and WMP plugin for Firefox 4 doesn´t work, but on WinXP it does work normally with the same plugin version after upgrade to FF4.
Try http://forums.adobe.com/thread/892474
-
Driver for lexmark x1185 (series 1100) for MAC OS 10.7. Anyone has a solution ?
You should contact Lexmark. They have not released a driver for this printer since 10.3, and they no longer sell it. You could try the Generic PostScript PPD and see if you get limited functionality.
Hope this helps. -
Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?
Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! -
I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.
Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha -
Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out. HP 600-1315xt.
Have tried everything I can find on internet and here on HP. None of the suggestions worked. Windows fixit for windows could not fixit. Any suggestions are appreciated. I can always use my disks and rebuild the computer. A last resort.Hi,
It might be the graphic driver not compitable with the graphic device. Has there been a change to the graphic driver?
One thing you can try is to uninstall graphic driver and download the latest from Windows Update (if you haven't tried this). Here are the possible steps:
1. Go to Control Panel->Hardware and Sound->Device Manager, uninstall the graphic card driver by right clicking and select "uninstall". Make sure the option "Delete the driver software for this device" is selected.
2. Reboot the system.
3. Go to Control Panel->System and Security->Windows Update, click on "Optional updates" and find the driver for g210 and do the update.
I work on behalf o HP.
Please click the white Kudos star to say thanks.
Please click Accept As Solution if you found my response helpful. -
I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.
You can't activate any GSM iPhone without a valid sim card installed in the phone.
So, yes, you need to get a sim card. -
My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert
Try perform below steps.
Open task manager by pressing Ctrl + Shift + Esc keys. Click on more details if the option available.
Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
Then hold windows key on your keyboard and Press R key.
It will open Run window
In Run window, type Appdata and click on Ok
Open Local > Adobe folders
Delete AAMUpdater and OOBE folders
Then navigate to C:\Program Files (x86)\Common Files\Adobe
Delete Adobe Application Manager and OOBE folders
Go back to Program Files (x86) and Open Adobe folder
Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
Download and install Creative Cloud App from below link
https://creative.adobe.com/products/download/creative-cloud
Then check -
Mac OS X 10.6.7
CS 5.5
When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
This is intermittent but happens quite frequently each day if Firefox is active.MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
When I use
firefox.exe -chrome about:permissions
I get a usable window, but zoom doesn't work as you noted.
How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
https://developer.mozilla.org/docs/Web/API/Window.open -
I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.
In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings -
When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?
Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
-
I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?
Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.
Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa -
I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit
There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.
-
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.
Maybe you are looking for
-
How can I select in the Library just JPG's or just ARW files?
I always shoot both RAW and JPG's. Often after a shoot I will choose a few images that I want to work on in RAW and intend to keep in RAW; but some of the rest I'd just like to leave in JPG to take up less space and delete the RAW files (these are us
-
Hi, When deploying the ADF aaplication in glassfish server getting error like, [#|2012-12-03T14:21:53.586+0530|INFO|glassfish3.1.2|oracle.j2ee.jsp|_ThreadID=22;_ThreadName=Thread-2;|unable to dispatch JSP page: The following exception occurred:. orac
-
How can i get to know what is the reason for implausible meater reading?
Hi All, I am new to this SAP -ISU. can any body tell me how can i get the reason for implausible meater reading. my requirement is to get the unbilled meters becasuse of unrealibility of meter reader. here what i understood is if meater reading is no
-
Hi, I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port. for example: VIP address 1.1.1.123 use port 80 for HTTP and port 443 for HTTPS However, the following problems encountered, w
-
HT201401 IPhone often shuts down when it's comes about a 15 - 20 percent
IPhone often shuts down when it's comes about a 15 - 20 percent, And when trying to turn it on appears on the screen there is a need to plug in (to charge). After connecting to charger (after 5 seconds or so) the device turns on as if nothing had hap