When I use Export Project to New Library in Aperture does it create a copy of the images in the new Library?

I am going through my only library now and trying to better organize everything. I am grouping my images into projects by year then cleaning up each year. As I finish a year I use the Export to New Library option to create a library for each year. My question is when I do this and I tell it to Consolidate Masters into exported library does it create copies of the images in the new library as well as leaving a copy in the original library? My goal once I get this completed is to delete the original library but I certainly don't want to lose any of my images. Just looking at file sizes for the libraries I can see that the main library never gets smaller and the new libraries don't really seem large enough to contain everything.
Thanks.

To be honest a 6 year old machine with 4gb of memory and 300gb of disk running Lion and Aperture is not going to give you the greatest performance no matter how you split the library.
You're going to need more disk, What's your backup procedure now? The best performance will be had by getting an external disk putting the masters on it as referenced and having the library on the internal drive.
More memory would be nice but a 6 year old iMac, I think, is maxed out at 4. You'll need to keep other programs running to a minimum when you're working with Aperture.
How much free space is on the internal drive? That will be an issue also. If even with the masters relocated to an external drive cause the internal drive to fill up you'll need to move the library off the internal. If you do that you'll want to go with a FW drive. As long as only the masters are on the external you can get by with a USB but once the library goes out there you're really want to look at FW.
Hope this helps, post back if you have more questions
regards

Similar Messages

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

I mostly work on Mac desktop, but use a Macbook Pro on trips. Due to limited HD space on the latter, I want to create a library of part of the images on the Mac, to be used on the Macbook. I do not however want to remove these images from the Mac library.

I mostly work on Mac desktop, but use a Macbook Pro on trips. Due to limited HD space on the latter, I want to create a library of part of the images on the Mac, to be used on the Macbook. I do not however want to remove these images from the Mac library.

Choose one or more Projects, and then use Export as New Library (from File). The resulting export will be a fully functioning Aperture Library to either transfer and open on the Macbook Pro, or to Import into a library you already have on the MBP.
Ernie

Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I get th

Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I achieve that? Thank you.

That should work out, maybe edit it to force updating in the new image.
Could you please post a screenshot with the Layers Panel visible?

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable?

I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas

Try dragging the image to the desktop, then drag the image to the slide you want it on

HT201177 When using Facebook video calling, why can I not see the image of the person I am speaking with but the other party can see my image.

When using Facebook video calling, I am not able to see the image of the person I am calling but the other party can see my image. This problem just came up.

When using Facebook video calling, I am not able to see the image of the person I am calling but the other party can see my image. This problem just came up.

When I open my iPhone the image on the top is to connect has itune I makes them and I made a restoration(catering) and nothing works. I have the new version of itune also I to download them directly of apple

When I open my iPhone the image on the top is to connect has itune I makes them and I made a restoration(catering) and nothing works. I have the new version of itune also I to download them directly of apple

See this support document http://support.apple.com/kb/HT1808. It may be necessary to do this more than one time. Your device is in recovery mode.

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality. What am I doing wrong?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Using a devices camera and adding the image to the display list

Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/CameraUI.ht ml
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera/
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
     public class Main extends MovieClip{
          private var deviceCameraApp:CameraUI = new CameraUI();
          private var imageLoader:Loader;
          public function Main()
               this.stage.align = StageAlign.TOP_LEFT;
               this.stage.scaleMode = StageScaleMode.NO_SCALE;
                                 camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
                      private function cameraBtnClicked(event:MouseEvent):void
                                if( CameraUI.isSupported )
                                                  result_txt.text = "Initializing camera...";
                                                  deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
                                                  deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
                                                  deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
                                                  deviceCameraApp.launch( MediaType.IMAGE );
               else
                                                  result_txt.text = "Camera interface is not supported.";
          private function imageCaptured( event:MediaEvent ):void
               result_txt.text = "Media captured...";
               var imagePromise:MediaPromise = event.data;
               if( imagePromise.isAsync )
                result_txt.text = "Asynchronous media promise.";
                imageLoader = new Loader();
                imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
                imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
                imageLoader.loadFilePromise( imagePromise );
               else
                result_txt.text = "Synchronous media promise.";
                imageLoader.loadFilePromise( imagePromise );
                showMedia( imageLoader );
          private function captureCanceled( event:Event ):void
               result_txt.text = "Media capture canceled.";
               NativeApplication.nativeApplication.exit();
          private function asyncImageLoaded( event:Event ):void
               result_txt.text = "Media loaded in memory.";
               showMedia( imageLoader );
          private function showMedia( loader:Loader ):void
               this.addChild( loader );
          private function cameraError( error:ErrorEvent ):void
               result_txt.text = "Error:" + error.text;
               NativeApplication.nativeApplication.exit();

Hi,
Do I have to add the picture to the cameraroll in order to add it to the AIR apps display list?
Both examples from Adobe claim that their examples work. Do they not?
In the example, the event handler asyncImageLoaded is never called. The output text field shows -   result_txt.text = "Asynchronous media promise."; So the Event.COMPLETE is being added. But I don't think it's being dispatched.
Any ideas?

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

I Just converted my iPhoto library to Photos. Now I can't find my RAW files. I need to have all the images in my old library show up in their RAW format.

I Just converted my iPhoto library to Photos. Now I can't find my RAW files. I need to have all the images in my old library show up in their RAW format.

Unfortunately no - Photos use extensions and the vendor (adobe) will have to implement the extension to allow external edits in PS or PSE
For now you must export the photo, edit and then import - not great but a work arond
And you can continue to use iPhoto until Photos meets your needs - launch it in your applications folder - if you need assistance on this see Why won't my iPhotos open?
LN

The new iPad with 4g does it have to have a sim card in the slot for it to work so sometimes i can have4g and sometimes i cant

the new iPad with 4g does it have to have a sim card in the slot for it to work so sometimes i can have4g and sometimes i cant

For it to work(iPad) no. You do have to have it in to get data when your not connected to wifi. If it doesn't say 4g all the time that is because of the location your in. If your connected to wifi, the iPad will use the wifi connection first before using your data plan.

When I use Export Project to New Library in Aperture does it create a copy of the images in the new Library?

Similar Messages

Maybe you are looking for