When I use Greek accenting and polytonic characters in a title, Final Cut Pro X quits unexpectedly. What should I do?

When I try to write a title in Greek using the Greek alphabet, Final Cut Pro X quits unexpectedly, the moment I press the button for the Greek accenting (" ' "). This happens only when I press the button. If for example, I write the title in TextEdit and then copy paste it in FCPX then the title is pasted correctly and the program does not quit.
An example of title: "Εγώ", so as soon as I press the accenting and then "ω", then everything freezes and FCPX quits.
It must be a bug, but it really causes a problem. Temporarlily, I always c/p to textEdit and then paste it to FCPX. But I am also using Polytonic Greek system (fonts), so it is a bugger to always c/p. Is there a solution to this?
Thank you.

This seems to be a bug, as there was another thread that reported this exact same problem but using Finnish (I believe).
Do you have Motion? You can try doing your titles there and then export/import into FCPX.

Similar Messages

  • My Final Cut Pro X quits unexpectantly and shuts down which makes it impossible to use..need help asap

    Went I went to grab some pictures that I had downloaded from the web, FCP X shut down and sent a message to APPLE.  I have tried deleting the pics and this morning it was working for a little while but it shut down again.  I need to get FCP working properly. 

    Same thing happened to me yesterday. It started after there was a sudden electricity shut off when I was playing with FCP X. I do not have Compressor installed. I eventually managed to get FCPX to work again when I manually deleted in Finder the project on which I was working when the electricity went off.
    I hope this information may give you some ideas on your problem.
    Mannnolo

  • In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

    In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

    Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

  • I'm having trouble using the iTunes and Apps store because i can't register my Nigerian mastercard. What should i do. i'm trying to register it in the Nigerian iTunes store.

    I'm having trouble using the iTunes and Apps store because i can't register my Nigerian mastercard. What should i do. i'm trying to register it in the Nigerian iTunes store.

    Is this a new Apple iD? If it is, and you have already set it up, then you have two options:
    1.     Temporarily put a Credit Card or Gift Card on the account to download the free app. If you put a credit card, then once you have downloaded the app, you should be able to go into your Account preferences and change the payment option to = None.
    2.     You can download the fee App, and then set up a new Apple ID.
    Cheers,
    GB

  • Log & Capture Screen not opening and Final Cut Pro just quits! HELP!

    Hi everyone,
    I've been searching through the forums and reading up on similar issues but to no avail my problem still exists and I'm about to put a hammer to my computer. I have a G5 Mac at work and use my G4 for home use. Earlier today I was at work and was capturing my footage perfect using my Canon XH A1 using firewire and everything went well. Later on in the day when working on my G4, using the same settings and equipment from earlier, when I hit apple+8 it shows that the program is understanding my command but after a min without a screen appearing, final cut pro just quits. Now I've tried everything from deleting my preferences, final cut user data, you name it and I've tried yet still not able to get the screen to capture. I've even tried switching the firewire port just in case its a bad connection and still nothing. Can someone help me out so my computer can live to see another day.
    Thank You
    Message was edited by: Jason81

    You updated to 10.5?
    What FCP 5 version are you running -5.0 or 5.1?
    You need 5.1 if you have Mac OS X 10.5.
    Also, get rid of the Norton AV -it's a terrible resource hog and interferes with everything.
    I would go as far as to suggest Norton is trying to check the incoming data from your video capture.
    Turn it off at least, and see if there is any improvement.
    If you must use AV to avoid passing something to Windows users, get a free copy of ClamXav. It can be set to check only incoming stuff like Mail and downloads. Has a very small footprint and is only active when it should be. I use ClamXav myself as I often deal with FTP transfers.

  • I keep getting an error message that reads "to update application sign into the account you used to purchase it"   I am trying to download Final Cut Pro X 10.0.9  I am signed in with the account that I purchased Final cut Pro X   I don't have another acco

    I keep getting an error message that reads "to update application sign into the account you used to purchase it"
    I am trying to download Final Cut Pro X 10.0.9
    I am signed in with the account that I purchased Final cut Pro X
    I don't have another account I'm not sure what's going on

    Welcome to Apple Support Communities
    Open the Mac App Store and go to Purchases. Do you see Final Cut Pro X listed?
    If so, open a Finder window, choose Applications in the sidebar and delete Final Cut Pro X. Then, go to the Mac App Store and download Final Cut Pro X for free.
    If you don't see it in Purchases, see if it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 If it doesn't work, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • TA26012 Has anyone used keyring 808 spy camera with an itouch and rendered with good results in final cut pro ?

    I am using spy camera 808 which has the same 1280 by 720 H264 AAC as an itouch for filming.
    Problems occour in fincal cut pro 6.06 on export if i export 808 on its own no issue the issue is the itouch messes up the time liine on sound video, example 20 min video 10 mins 808 and 10 mins itouch equals 12 mins.
    So has anyone actualy with the power pc g5 and final cut pro 6.06 had a method where it is succseful for a simple export to quicktime ?
    Just tried it with itouch in final cut and fcpro says does not match settings so i let fcpro choose audio needed render that was it export of 5 mins came out as 30 seconds.
    So question stands has anyone found a suitable way to bring in itouch video and export in final cut with out issues.?
    ps i brought the video in with "image capture" and iphoto no change.
    email here if you would [email protected]

    My plan is as follows:
    -Make a full backup copy of System Drive on an external drive
    -Boot from OS Install Disc > use Disk Utility to Erase/Write Zeros to drive
    -Install Snow Leopard
    -Install FCP, etc.
    -Delete "Capture" directory from external "Scratch Disk"
    -Transfer all remaining files to another external drive
    -Reformat "Scratch Disk
    -Cross fingers
    -Begin transcoding process again---frequently checking files for errors
    I'll let you know how it goes. Still open to other thoughts and suggestions...
    -Ryan

  • Can I use "apple script" to auto input xml file to final cut pro and auto export mp4 file?

    Now, I'v a lot of  final cut pro x 's xml, I want to use ""apple script" or other method to auto input xml and output mp4 in final cut pro x . How can I finish it?

    Where did the XML come from? What did it consist of?

  • DVC Pro Tape and DV tape not good in Final Cut Pro 5?

    I have a DVCPro tape along with a deck as well as a DV tape along with a deck for that.
    I started final cut pro and used the NTSC easy setup. I first captured the DVC Pro, when it was done i tried to play it in the viewer and it would play for less then a second then stop. However when i brought it down to the timeline it played fine in the canvas.
    So i when ahead a captured the DV tapes onto the same project. When it was completed i tried to play it back using my DV hardware to my TV but i would only see picture and no audio. ALl my settings were correct and the audio would only play on Mbox or the internal speaker in a G5. I thought i had a bad connection but the DVC Pro tape worked fine with audio. So i figured i go back to the DVC File i captured and when i pulled it up in the viewer everything is green and no picture what so ever.
    Can anyone please help

    #8 External Monitor Viewing.
    Shane's Stock Answer #8:
    A simple path is mac > firewire > camera or deck > rca cables > tv
    Then start up your camera and tv, then open fcp.
    Then go View > External video > all frames
    Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
    Shane

  • How to fade background music out and fade in video clip audio Final Cut Pro X

    I am putting together videos and photos made during one of the trips, and I have background music running throughout the whole movie, but I want to fade this music during some parts of the video to hear the original speech/sounds of it, and then increase the volume of background music again. I know that in iMovie it is done in a few simple steps, and it almost automatically fades the music in/out. But I cannot find any similar options in Final Cut Pro X, how do you do it there? (I have 10.1.2 version)

    Daniil. wrote:
    I am putting together videos and photos made during one of the trips, and I have background music running throughout the whole movie, but I want to fade this music during some parts of the video to hear the original speech/sounds of it, and then increase the volume of background music again. I know that in iMovie it is done in a few simple steps, and it almost automatically fades the music in/out. But I cannot find any similar options in Final Cut Pro X, how do you do it there? (I have 10.1.2 version)
    This is very easy to do.
    Press the letter R to switch to the Range tool. Drag the appropriate range in the audio clip. Press A to go back to the normal arrow tool. Drag the volume down. (Alternatively, instead of pressing R and then A, you can just hold down the letter R while you drag; then release and you are still using the arrow tool)

  • FINAL CUT PRO KEEPS QUITTING WHEN TRYING TO OPEN PROJECTS-PLEASE HELP!

    I am finishing up two projects and ready to export them to quicktime and final cut pro will not let me open the projects as it quit on me and these projects will not re-open.
    Can someone please advise?1?!
    Thanks

    Does it give you any error messages?
    Try downloaded FCP RESCUE and then click on TRASH. It will trash your preferences...that usually fixes stuff like this.
    Shane

  • I own a Macbook Pro 2008 and Airdrop doesn't work? Final Cut Pro X Flop!

    Aidrop: Why does Apple offer such features and then they don't work? Apple is on a mad way i think?
    Final Cut Pro X:
    ...also with Final cut Pro!!!! support please!
    Apple stands for a minority of creative People. There Machines stands for creativity and they should inspire people.
    Its not cool to become a fake like our politicians are! Dont make Promises you cant afford!
    Logic Pro:
    Dont kill this App too!!!
    Wake up!!! Dont make the same mistakes others did!
    Spend some Money earned with Phones and Apps and invest in your PRO's!
    greets from Germany! Work on beeing on the right track Apple!

    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Why can't I use HD video from my Samsung Galaxy S2 in Final Cut Pro 6?

    My Samsung Galaxy S2 shoots gorgeous 1080P HD Video.  It has no trouble importing into iPhoto, but when I want to edit in Final Cut Pro 6, it won't accept the file.  Anyone know how I can fix this?  Thanks.

    FCP doesn't edit the format the camera shoots. You need to convert the video files to ProRes...then import into FCP.
    If you want an app that edits formats natively, look at Adobe Premiere CS5.5.

Maybe you are looking for