When I use my brush tool, it works fine unless I overlap the brush with another brush stroke.
When I use my brush tool, it works fine unless I overlap the brush with another brush stroke. When that happens it turns bright red. How do I fix this and turn it back to the default setting?
I was all ready to say you have fill turned down until I got to the bit about it turning red. Does this happen on a new document with a single layer, or only on multi layer documents? So like cp says... brush or layer mode most probably. I did wonder about Quick mask though.
Similar Messages
-
I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.
Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. -
My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?
Take it to Apple and ask them to fix the physical damage the water caused.
Allan -
Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!
For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download -
I have been using bullzip printer for years with Foxfire. I am now using a version 7_1_1_0_1218 of bullzip printer I downloaded in March 2011. I am using Windows Vista Service pak 2 with all latest updates.
ah..interesting. I found an alternate solution that works for
us at least
Our authentication is called from a file called
bluestemcookie.cfm with this format
<cflocation
url="https://#CGI.HTTP_HOST#/bluestem/lb_login.pl#AGREEMENT_PATH##CGI.SCRIPT_NAME#"
addtoken="No">
I was having the exact same problem, but notiece that if I
changed lb_login.pl to lb_login.pl? it now understood that
everything after was parameters and off it went to authenticate. Of
course then upon return I had a /? in my url and it burped again.
In looking at the construction of the URL to return in lb_login.pl
#---Construct Return URL------------------------------------
$ReturnURL = "https://$bluestem'R_ServerNamePort";
$ReturnURL .= $bluestem'R_PathInfo;
$ReturnURL .= "?$ENV{'QUERY_STRING'}" if
$ENV{'QUERY_STRING'};
I noticed the ? in the beginning fo the third string
concatenation. hmm.... removed that ? and now all our
authentication with IIS6 CFMX7.1 Win2K3 work fine. Just food for
thought as your solution appears to be better. -
no responses to any hyperlinks or buttons in this area. any button or hyperlinks that scroll into this area go dead as well, and when you scroll down they work fine. reduced the window but still does it.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I have an iMAC and when I am on Facebook my list of friends does not show up in the box for me to request gifts. I know this is a problem with my Mac because my daughter's PC shows it. I recently did the automatic upgrade thing but didn't pay attention what it was. When I did that it changed my desktop picture back to factory. Could this have something to do with it and more importantly what do I do about it?
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?Thanks for your response,
I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all. Frans Vischer
author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
www.fransvischer.com
pamperedfatcat.wordpress.com -
Photoshop CS6 healing brush tool wont work
So neither the healing brush tool, nor the spot healing brush tool wont work properly. It looks good, until you let it go. Then all it does is smudge (photos attached)
That is not a spot its a huge area try working with the patch tool and use even a smaller area. I think even content aware fill would have a hard time there with the area.
-
Brush tool not working on mask.....
Can't seem to get brush tool to work on mask.
Duplicated a layer and applied multiply blend mode. Don't want effect of blend mode on entire image but can't get the brush tool to work on mask. I have made sure than I am working on the mask and not the image itself. Exposure is at 100% and have tried it with shadows, midtones and highlights. I'm probably overlooking something that is fairly obvious but can't figure it out. Any one know what I'm doing wrong?yes, you are, that's not the Brush tool, you are using either the Burn or Dodge tool. The Brush tool is higher up in the Tools panel:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-74f5a.html -
Why does my photoshop keep giving black and white lines when I use my lasso tool?
why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.
-
I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!
That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies -
Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!
You're welcome.
There are a couple of issues connected to it:
http://www.vektorgarten.de/problems-align-to-pixel-grid.html
I don't think that list is complete -
I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.
Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G. -
Help!!!! clone stamp and healing brush tool stopped working suddenly
Help!!!! clone stamp and healing brush tool stopped working suddenly
What are the Tools’ Blend Mode, Opacity and Flow (see Options Bar)?
Could you please post a screenshot with the pertinent Panels visible?
Have you tried resetting the Tools?
Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Maybe you are looking for
-
How to have OUT parameter for see if transaction have been posted correctly
I've a package procedure that reads data from a staging tables into their corresponding target tables. The below procedure variables are in the package specification and body. I need to create another procedure that ensures data has been sent to both
-
What's the purpose of SQL Developer's remote debug?
AS per SQL Developer's "Remote debuggin", the user guide says "To debug a function or procedure for a connection where the database is on a different host than the one on which you are running SQL Developer, you can perform remote debugging." I'm con
-
Hi, The trash is refusing to empty a couple of font packages, saying that they are locked. But 'Get Info' shows them not to be locked. I own permissions for the Mac. Solutions most welcome! newomary
-
Invalid materialized view at system schema
My database version is 11.2.0.2.0. I have found more than 100 invalid materialized views at system schema. These materialized views are named as MV$$_0BCC00%. I did not find any documents on why these views are created. Can anyone help me about the i
-
We understand that obiee does not contain essbase. Essbase can be intregated with obiee plus. but does obiee can do 'What if' analysis? If yes, then which component does it for OBIEE.