When I use the spotting tool on a very dirty image it bogs down. Can I collapse the work?
What is the best way to save or collapse the work I have done on an image so I can get back to working at a good speed? I am guessing if I saved the image as a JPEG and reimported it that would add noise. There is probably a simple way to solve this. Any answers?
Thanks
Robert,
There is still a known bug where LR (including 3.3RC) bogs down when large number of spots are utilized. Every system is different and most systems appear to not have this problem. Personally, on my system, cleaning up a BW scan will bog down when I add around 50 spots and become unbearable by 100 - sometimes even hanging for 30 seconds or more.
Some improvement was provided with the 3.3RC in that the hanging is less likely; however, the slowdown is still experienced and adding more spots once it gets to this phase is not an option.
If 3.3RC doesn't solve your problem, and space is not an issue, you might consider exporting (and automatically re-importing) in TIFF format. You will probably lose the least amount of detail and introduce the least amount of noise that way as opposed to a JPEG file. You can then continue working on the re-imported TIFF file as your original and you should be fine for a few more spots. I would probably delete the file you exported from so you don't get confused about which file is your image file (just my personal preference not to have two files of the same image unless they are VCs).
Also, I find that exiting and re-starting LR every 5 or so images while in Develop module can help but that is huge pain.
Best of luck. I am patiently awaiting updates to fix this issues once and for all.
Jeff
Similar Messages
-
Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!
You're welcome.
There are a couple of issues connected to it:
http://www.vektorgarten.de/problems-align-to-pixel-grid.html
I don't think that list is complete -
When I use my brush tool, it works fine unless I overlap the brush with another brush stroke.
When I use my brush tool, it works fine unless I overlap the brush with another brush stroke. When that happens it turns bright red. How do I fix this and turn it back to the default setting?
I was all ready to say you have fill turned down until I got to the bit about it turning red. Does this happen on a new document with a single layer, or only on multi layer documents? So like cp says... brush or layer mode most probably. I did wonder about Quick mask though.
-
Why does my photoshop keep giving black and white lines when I use my lasso tool?
why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.
-
WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???
Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options? -
Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem
Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.
-
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
The speaker is used when iam using my phone in speaker phone mode or listen to music.This speaker is only the right side hole and the left one is micophone?
Correct. As indicated in response to your duplicate post.
Stedman -
Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.
Try this as a first step;<BR><BR>
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
and<BR><BR>
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''. -
When I start firefox, the previous tabs are there but blank and say new tab, can I restore the tabs?
When I start firefox, the previous tabs are there but blank and say new tab, can I restore the tabs?
how can I do this?I'm not sure what causes this.
As the first step, I recommend backing up your existing sessionstore files.
Open your current Firefox settings (AKA Firefox profile) folder using
Help > Troubleshooting Information > "Show Folder" button
Scroll down to the files whose names start with sessionstore. You should find at least sessionstore.js and sessionstore.bak. If the .js extension does not appear on sessionstore, you should turn off the Windows feature that hides file extensions from you, so that you can work with file names as accurately as possible. This Microsoft support article has the steps: [http://support.microsoft.com/kb/865219].
Make backup copies of all the sessionstore files to somewhere like your Documents folder for possible later restoration.
Next, try one of the data mining techniques in these posts to rescue the URLs from the sessionstore.js or sessionstore.bak file:
* Using Firefox's Browser Console (formerly known as Error Console): https://support.mozilla.org/questions/969046#answer-471950
* Using Firefox developer tool "Scratchpad": http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147
* Using a third party website: https://firefox-session-restore.herokuapp.com/ -
CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.
Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again. -
When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ? I need time machine to migrate the latest back-up. Should I delete the older back-ups ?
As noondaywitch says, it should use the latest backup.
Where are your backups (external HD, Time Capsule, etc.)?
It sounds like there are two separate sets, and you're not connected to the right set. -
What should I do if the iphoto keeps on saying that "Plz wait for import to complete" when i click the close button but it is not importing photos? How can I close the iPhoto? I try to switch my mac off but it doesn't work. Thanks.
You should be able to select Force Quit from the menu beneath the Apple icon in Finder
and choose to Quit iPhoto from there, without messing up the Mac OS X in the process.
OS X - Support
Not sure if rebuilding the iPhoto library would help this issue. However if you had to
turn off the computer without the correct method (unplug, etc; instead of menu choice)
the system may have accrued damages and should be checked, maybe repaired by
use of the Disk Utility in the system. Or restart the computer in Safe Boot mode, then
run 'repair disk permissions' while it is running in that reduced mode; then restart after.
•Understanding Safe Mode - tuts+ computer skills tutorial:
http://computers.tutsplus.com/tutorials/understanding-safe-mode--mac-59897
•OS X: What is Safe Boot, Safe Mode?
Suggestions on how to use Safe Mode in article, to resolve issues, may be helpful.
There likely are other means to rectify troublesome applications, including reinstall.
Be sure to backup your music, image, video, and other work on an external drive
or suitable device as a precaution against loss should there be a hard drive failure.
iPhoto - Mac Apps - Apple Support
There should be some tips and help information using iPhoto via this tiny Support link.
Good luck & happy computing! -
When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy New Year
Maybe you are looking for
-
HT5361 mail won't open from my dock
I click on the mail icon in my dock and nothing happens. It wont open. What could be the problem? Thanks
-
Hello everyone, I have a Beige G3 MT with the following specs: 541 MHz G4 processor 83 MHz System Bus 384 MB PC133 SDRAM (2x128 MB, 1x 256 MB Single-sided) ATI Radeon Mac Edition with 32 MB VRAM Keyspan PCI USB 1.1 card (OPTi) 80 GB 5400 RPM Samsung
-
Exporting from FCP for iPhone...
OK... So we have almost 100 videos on our website from the last couple years. I was under the impression they worked on ipods/iphones..... I was wrong. Here is step by step how I export them from FCP, I'm hoping someone can point out why they wont pl
-
I'm guessing the answer is no, but does anyone know if there are any adaptors that allow you to use the ZVM on iP*d accessories? There are car stereos that have iP*d connections, speakers etc. There are nowhere near as many accessories for my beloved
-
Business Rules Only Visible in One of the Two Planning Webs
Hi all. I have this issue with a classic Planning application deployed to run with the calculation module to Business Rules in v11.1.2.1. I have also load balanced EAS/APS and Planning servers but when I log into Hyperion Planning in one of the serve