When i use the text tool the text inside the box is very small almost invisible even when i keep the text size to 72 please help
I Have the PS CC 2014 installed in my Win7. I have a problem with the TEXT TOOL,when I select the tool and type something in there,the text is very tiny eventhough the size is 72. I have tried all the things,like Preferences changing,tool reset,character resets etc., Please help me its very frustrating!
Do you see this behaviour on a new Photoshop document?
Try creating a New document:
File > New.
From the Preset menu, choose U.S. Paper (just so we can test what's happening).
Take note of the Width, Height and Resolution of the document you are creating.
Select the Type tool, and ensure the font size is set in pt (points), set to 72 pt.
Click anywhere in the canvas, and start typing.
Do you still see the problem? If it's disappeared, then check the problem document settings:
Image > Image Size, what's the resolution and physical width and height of the file?
Hopefully this will help you discover what's happening to your document.
Cari
Similar Messages
-
Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!
You're welcome.
There are a couple of issues connected to it:
http://www.vektorgarten.de/problems-align-to-pixel-grid.html
I don't think that list is complete -
when i use the blade tool to cut a clip in an angle during multicam editing, i can't move the clips afterwards. it's like they are stuck together. ??????
Thanks, MirceaHi,
I'm using 10.0.7. It's like snapping won't turn off. Instead ,if i use the keyboard to nudge the clips, there's no problem. I am using that at the moment.
1. when i try to drag
2. when i nudge:
3. snapping is off.
Thanks,
Mircea -
When I use my brush tool, it works fine unless I overlap the brush with another brush stroke. When that happens it turns bright red. How do I fix this and turn it back to the default setting?
I was all ready to say you have fill turned down until I got to the bit about it turning red. Does this happen on a new document with a single layer, or only on multi layer documents? So like cp says... brush or layer mode most probably. I did wonder about Quick mask though.
-
My find my iphone app, my phone was offline. So i checked the notify me when its online. I did this on my boyfriends iphone so now that we found my phone he keeps getting text messages sent to him notifying him none stop where my phone is at?? How do i let stop the text messages to stop?? It sends the location and long. lat. where its at....??
My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s -
I had on my desk top PC (a vista OS) a version of FireFox that the book marks where listed in the book tool bar tab and the "book tool" was able to show all my favs and there was a scroll bar on the right side of the top right side. I would like very much to turn it on in the Laptop I just bought and am having a fit trying to figure out all the differences,.I very much like this function; however, I am now using win 7 which in and of itself is difficult to figure out troubles when they occur such as if the MSN Bing program opens a video window while I am playing, the media center will lock up, or if I am listening to BBradio.org and click on lestening to one of the pastors the laptop will show static on the screen and all you hear is static like you just went to the twilight zone.
== This happened ==
Not sure how often
== unpredictableTo attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html -
Why does my photoshop keep giving black and white lines when I use my lasso tool?
why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.
-
Question regarding the pen tool (w/ picture inside)
Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!A couple of thoughts come to mind:
1. You could create the shape "face on", using guides, and the points will snap to guides with snap enabled. Then you could transform the whole thing together by selecting all the shape layers.
2. Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
3. There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually. I assume this is what you're trying to avoid.
-Noel -
I am using a Pixma MG3222. Print is very small, no matter if I print from the Web, PDF or a document using any of the iMac apps. Also, the Quick Menu does not show any functions in the Print or Manual & Device Information sections. This problem is only on my iMac (OS X 10.8.5). The printer works fine on my PC. For the iMac I have downloaded the Mini Master Setup driver and then the Quick Menu and EZ Photo print software. Can anyone help? I've been at for several days and am beyond frustrated!
Hi mac,
We have updated the printer & scanner driver since the Mini Master Setup was posted, please try installing the following listed below from HERE:
MG3200 series CUPS Printer Driver Ver. 10.84.2.0
MG3200 series Scanner Driver Ver. 19.0.0a
Canon IJ Network Tool Ver. 4.2.0 for Intel Mac
Let us know if the updated drivers resolves your issue.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done
downpayment percentage , so if i want 50 percent of order value to be paid and when i go to faz type the invoice is created for 0 value that 50 percent of the amount is not getting calculated , where as when i enter in order same as 50 percent in amount it gets calculated in invoice, any help ?
-
hello my name is vicky i have an ipod classic 160 gb when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod i even checked the number of reallocs and pending sectors so please help me......for this
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?
Don't tell us, tell them
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback -
My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!
Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do... -
I am still trying to update my Ipod touch 4 to the iOS 6 version. It is on the 4.3.5 (8L1) version. When I go to settings-General-it just says About and nothing about an update. I have no idea how to update it! Please help!
You can only update via the ipod with ios 5 or later.
You need to update via itunes on your computer as always. -
I could not find the "burn tool" in Photoshop 7, so I purchased Photoshop Elements 12, and I still cannot find the "burn tool".
Does the "burn tool" still exist? If so, where is it???
ThanksWell, as I always say... If I want things done right, I have to do them myself.
I found the solution on the Internet... One must place your pointer on the icon that is presently showing and then press the letter "o" key to toggle between the Burn, Dodge, and Sponge tools.
Maybe you are looking for
-
Need to know first day of current quarter
hi, I want to implement a variable to dertermine the date range of "the quarter to date" of last year: low: current date -364 high: first day of current quarter -364 so if anybody knows how to get the first day of current quarter, based on teh curren
-
How can I search sent email by date and see who it is to?
How do I search on date in mail and see who it is to?
-
Source selection is empty due to inverse mapping
Hi Experts, When execute data collection task, one of Cons unit got the below error. "Source selection is empty due to inverse mapping" Message no. UCT8250. I checked BI mapping rules and also compare mapping rules in LDS with other cons unit. There
-
Hi , Clear installation , no errors followed every step ran all the scripts @apexins , @apxldimg , @apexconf.sql and unlock all the users anonymous , apex_public_user, apex_040100 ........................... configured port number to 8081 and reset t
-
Hi I just got my x230 today and was playing around with the system restore (f11) function since I want to upgrade the hdd to ssd soon. The machine comes with windows 8. After booting into the recovery patriton, I clicked through "trouble shoot" then