When I use yahoo images and i open an image in a new window, it tweakes out firefox so that panes are distorted and exerything, the whole firefox browser looks like an F5 tornado took it apart and lumped it on my desktop... is this a known glitch?

When I use yahoo images and open an image in a new window, the page, once I click its tab causes the entire browser to scramble graphically, making it nearly impossible to navigate further. I right-clicked and selected close tab. That regains the visual clarity of the browser. But how can I fix this to browse the images?

Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry

Similar Messages

  • When i try to open a link in a new window, FF4 just gives me a blank page.. what might be the problem? thanks

    when i try to open a link in a new window, FF4 just gives me a blank page.. what might be the problem? thanks

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I used an upgrade from a different phone to purchase a new iPhone.  How do I assign that phone its original number (not the one that it was upgraded from)?

    I used an upgrade from a different phone to purchase a new iPhone.  How do I assign that phone its original number (not the one that it was upgraded from)?

    Phone number of the device is assigned by the carrier.
    Ask the carrier.

  • HT203390 when I try and sync my ipad 2 with my new XPS laptop i get a message that says "attempting to copy to the disk os failed." what should I do to sync my ipad?

    when I try synching my ipad 2 with my xps laptop i get the following message. "Attempting to copy to the disk os failed." How do I resolve the problem?

    It would be useful to you if they had a different name, but the computer knows they are different. Create separate sync playlists for each device and go to the Music tab when it is connected and specify which playlist should be used for the sync.

  • Why can't i open a playlist in a new window with itunes 11?

    so i can apparently no longer open a playlist in a new window... how am i supposed to drag & drop songs in the order i want them to play?

    I get your point and I was really just trying to break your sense of despair. It is easy to become overwhelmed when something big and new comes along. We all have our own ways of doing things which we become used to and ...... well you know what I mean.
    Now, lets see if I can help you learn how to use this wonderful iTunes to get a grip on your music at a basic level.
    Start by going to the SONGS pane. This is the workplace, the most powerful place to be for finding stuff, organising and maintaining your music. The other panes are the pretty places to go when you want to play and enjoy your collection after the work is done.
    Make sure that you have the basic columns showing (View Menu, View Options). I suggest that essentially you should tick the following boxes :- Album, Artist, Checked, Genre, Time, Track Number, Year, Plays.
    In the column for Album, if you repeatedly click in the heading, the heading will cycle thru Album/Album-by-Artist/Album-by-Artist-by-Year. Play with that a little and see what it does. Also note that every column can be sorted by clicking in the column heading. The column that you are currently sorted by is shown by a little up or down arrow.
    Then turn on the Column Browser (View Menu) and check Genres, Artists Albums.
    Now you have the tools to find and organise. You have the view-by-genre you wanted. You can select all genres or you can select one or many. Same for Artist. Same for Album. Your selections are reflected in the lower songs pane. The horizontal division between the Column Browser and the Songs can be raised/lowered by grabbing the top of the heading line.
    Turn on the Status Bar (VIew Menu, Show Status Bar). The number of songs, the playtime and the disc space that your selection uses is shown here.
    NOW you should be able to do just about anything. Enjoy

  • I am using iphoto 6.0.6 and after opening the application it drops below the dock.  I can see it when I use expose to reveal all open windows but once selected it drops below the dock.

    I am using iphoto 6.0.6 and after opening the application it drops below the dock.  I can see it when I use expose to reveal all open windows but once selected it drops below the dock.

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
    (On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
    (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

  • How do I get connected to a server on my network via an IP address?  When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

    I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path?  When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

    Some of the following is going to use some technical terms — this area is inherently somewhat technical. 
    If you don't understand some part of the following reply, please ask.
    Is this your own OS X Server system on your own network, or is this some other server within some larger organization? 
    You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
    If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured.   This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
    If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
    The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
    http://10.20.30.40
    UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share.  That's used if you're connecting to an Apple storage service somewhere on your network.  You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server.  (There can be additional requirements for connecting to Windows Server systems, too.)
    If there's local IT staff available here, please contact them for assistance.  If these are your own local systems and your own local OS X Server system, then some information on the server will be needed.  (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

  • When I use my apple id to open I cloud I get a message that says id for apple is correct but not icloud id? Keeps me from reloading previously  purchased itunes, Is there anyway to correct this?

    when I use my apple id to open I cloud I get a message that says id  is correct apple id but not aa icloud id. This keeps me from dowloading previous purchases that I have lost when new ones sync on my ipod. anyway to correct this?

    If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.

  • New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

    I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

    Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on.  Then see if you can access Settings.

  • I am trying to open a .tiff file in photoshop by using bridge and it opens it as a photo in windows. If I go to file open it says could not complete request because it is not the right type of document. It is a file from a lesson folder from school. Can a

    I am trying to open a .tiff file in photoshop by using bridge and it opens it as a photo in windows. If I go to file<open it says could not complete request because it is not the right type of document. It is a file from a lesson folder from school. Can anyone help me?

    Hi,
    The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
    You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
    DNG  Converter 8.8
    Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
    Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
    Useful Tutorial
    http://www.youtube.com/watch?v=0bqGovpuihw
    Brian

  • I am using iphone model MC603B is factory unlocked and updated os 5.0 when i use any carrier in it there always on screen no service please hlep me out .

    I am using iphone model MC603B is factory unlocked and updated os 5.0 when i use any carrier in it there always on screen no service please hlep me out .

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

  • I have used Sony for the past 5 or 6 years.  They recently stopped selling books and migrated their customers to Kobo.   In uploading the Kobo site it looks like I added a new Adobe ID.  Then my reader and computers were out of sync.  When I try to downlo

    I have used Sony for the past 5 or 6 years.  They recently stopped selling books and migrated their customers to Kobo.   In uploading the Kobo site it looks like I added a new Adobe ID.  Then my reader and computers were out of sync.  When I try to download books I get that they were already downloaded by another user, but also that they are in my library.  However, I can't find them, and if I do download, it gives me an error message that the book is DRM protected.  How do I get to the point where I can download books again?

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Once my iphone4s updats to ios 6.1.2,the electric quantity runs so fast!And the mainboard is so hot, when I use it,especially,make calls. If I make calls exceed two minutes, it gets so hot, that I can't be able to hold.

    Once my iphone4s updats to ios 6.1.2，the electric quantity runs so fast！And the mainboard is so hot， when I use it,especially，make calls. If I make calls exceed two minutes, it gets so hot, that I can't be able to hold. If the battery is full at night, it falls down almost a half, when I get up. I don't know what is wrong with my phone, need help.

    Thanks for the input.

  • My iphone 4 ,new update give me not happie ,when i use yahoo messenger little whow there freeze my phone

    my iphone 4 ,new update give me not happie ,when i use yahoo messenger freeze

    Basic troubleshooting from the User's Guide is reset, reset, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Maybe you are looking for