When I used my iPad the the volume go down

When I used my iPad the volume go down

You could press the keyboard down button (shown bellow), or hold it if its not going down. OR Hold the power button for about 8 seconds until it asks you if you want to reset (slide to unlock).  OR  switch the little switch located on the side of your ipad (shown Below)

Similar Messages

  • I dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

    i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

    Steven ~ Welcome to the Support Communities. The following may be useful for next time...
    AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
    iPad mini cases from Tech21
    iPad mini screen protector from Tech21

  • When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

    When will you make an IPad YouTube app. There is one for iPhone and when you use it for the iPad the quality is bad since you have to zoom in. Please fix

    If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

    When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

    Read here:
    http://help.apple.com/ipad/8/#/iPad9a245e3e

  • I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

    I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

    I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

  • I have an iPad 2 and the volume icon is in the middle of my screen and when i try to turn the volume down it just goes back up again and it  makes it impossible for me to play games

    i have an iPad 2 and the volume icon is in the middle of my screen and when i try to turn the volume down it just goes back up again and it  makes it impossible for me to play games or do anything

    Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Will my iPad still get charged when I use my iPad with the plug in when it is fully charged?

    I'm wondering if my iPad will still get charged when I use it with the plug in when it is fully charged, because some computer battery's lifespan get decreased when you use them with the plug in when it is fully charged, but is it the same thing with the iPad or does it stop charging when it is fully charged?
    Thank-you! :D

    Tommy Kim wrote:
    So, it would be better to use my iPad plugged in to keep my battery's lifespan? And when I use it with my iPad plugged in, will it not charge but instead use that energy from the charger to power up my iPad?
    No it is not better to use it all the time when it is plugged in. Use the battery. That's what it is for anyway. See Michael Black's post above. That will wear the battery down and the performance of the battery over time.
    Use it on the battery and when it needs to be charged - recharge it. If you leave it plugged in after a full charge - it will not hurt. The battery will stop charging even if it is left plugged in.
    It is OK to use the device while it is plugged in - even for a matter of hours  - but not constantly or as a rule of them.

  • Hello everyone !  As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad it says that it's not activated, and I can't activate it using the iPad , When I plug it on my win so I can restore it using iTunes , I got to er

    Hello everyone !
    As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad forgot my passwaor, and I can't unlock it using the iPad , When I plug it on my window so I can restore it using iTunes , I got to errors , once "Unkown error 3004" and once "It's not eligble".
    I hope you can help me.
    Thanks,

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I have a Mac, an iPad and an iPhone.  When I contact someone using iMessage, for example using my iPad, the entire conversation also appears on my Mac and iPhone - How do I stop this duplication?

    I have a Mac, an iPad and an iPhone.  When I contact someone using iMessage, for example using my iPad, the entire conversation also appears on my Mac and iPhone.  How do I stop this duplication?

    Hello ctb4408,
    With iMessage, it is meant to show up on all your iOS devices and Mac. If you do not want them to go across all your devices, then you will need to turn off iMessage on your iPad and Mac Pro.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    -Norm G.

  • When I use my ipad 4 half hours later, it getting hot ? is because the leather cover can't breath or because ipad itself?

    when I use my ipad 4 half hours later, it getting hot ? is because the leather cover can't breath or because ipad itself?

    The first thing that you should probably do is remove the cover, if it is getting that hot. If it cools down at all, maybe that cover isn't ideal for your iPad.
    But your iPad should get really hot and if I am reading your post correctly this occurs after a half hour of use?
    From your post its difficult to tell if you have an iPad 4, that gets hot after one half hour of use ....  or if you have an iPad, that gets hot after 4-1/2 hours of use.

  • TS3274 When using my IPad, the screen will go dim and I need to tap it restore it  to its bright state. This same thing happens  many, many times while I am using it.

    When I am using my IPad, the screen will get dim and I need to tap the screen to get it to brighten up again.  This happens repeatedly while I am using it. Is there something I can do to stop that from happening?

    You don't necessarily need to set it to never...being set that way, you'll risk depleting the battery in case you forget to lock the screen.
    Instead, use a value greater than your previous 2 minute setting...see which time setting would work for you. The settings are:
    2 Minutes
    5 Minutes
    10 Minutes
    15 Minutes
    Never

  • HT1567 I have the volume control symbol in the center of my iPad all of the time.  My music will not play and the volume remains off.  When I try to increase the volume manually it statics and will not maintain a volume level.  Thanks

    I have the volume control symbol in the enter of my iPad all of the time.  My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level.  Thanks

    Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.

  • Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • When I turn my iPad the screen doesn't turn?

    When I turn my iPad the screen doesn't turn- please help?

    On the top (near the battery indicator) do you see a little circle with a padlock in the middle? If so, there's a slide switch by the volume toggles. flip that switch and see if it restores the accelerometer

Maybe you are looking for

  • A field of the table in sql server db can't be updated with the db adapter

    Hi all, I am using db adapter to update data in bpel. The database is sql server. But on the running time, i find a field which named 'JDBCT1' can't be updated. all the other fields of this table can be updated properly. For the operation type, i hav

  • How can I prevent breadcrumbs from being used on the first page?

    Hi, I'm using the latest version of the technical communication suite to produce a WebHelp layout from a framemaker book. Thanks to all the help I've received so far it's proceeding well, although slowly. II have an initia l'home'  page, that isn't p

  • How to read the last line in a text file using text_io?? please help

    Dear all I made a procedure that append text into a text file on the operating system. the text file grows rapidly. It contains now about 200,000 line . I need to read the last line only . In other wprds i need to go direct to the last line to read s

  • Reading current workbook in Excel

    Hi, I am trying to read from an ABAP report, using OLE automation, some cells from the currently opened workbook. I don't want to ask the user where the file is, but just read the currently opened file. I was successful to activate the Excel applicat

  • PL/SQL Packages as Web Services - plsqlAssemble Task - Code Generation

    Hi, I was able to generate Web Services for some of the PL/SQL packages using plsqlAssemble Task. (10.1.3 .1.1) It produces a certain number of java classes for that. Then I had to modify some of the generated code. What is the best approach on modif