When I used to move my cursor over a link, it would display the address, that disappeared, how do I get it back on?
When I used to move the cursor over a link, it would display the address of the link in the lower left hand corner before I clicked on it. This has disappeared, how do I turn it back on?
== This happened ==
Not sure how often
== A few months ago
View > Statusbar
Similar Messages
-
I downloaded movies onto my iPad to watch when I was abroad, I synchronised with my laptop and now they are not on my iPad how can I get them back?
If the shows are in fact still on the pad, they will be found in the videos app, not the music or I tunes app. Look there and see if they are still there.
If you don't see them there, go to the searchlight screen ( farthest left home page) and type in the name of one of the shows. If it is on the pad, hiding somewhere, this will find it.
If they are not there, they should not be using up space.
To get them back onto your pad, plug in and sync again. Make sure you transfer purchases first. Before you sync, take a look at the video tab in your I tunes, and check what you want and don't want synced. -
When I buy a song, I no longer ger similar suggestions. I used to, but no longer do. I liked that feature how can i get it back?
Hi! It was a library book and I first downloaded it to my computer, then tranferred it to my Ipod via USB cable.
It appears on my Ipod menu under Music - Audiobooks and also under Playlists where the book title appears with 10 songs under the name.
However, it does not show up at all on my computer screen under my Library music listings either on the left side where the playlists are listed or on the right where the individual songs and artists, etc. are listed.
At this point my setting is on manaully manage music. If I change that now in order to download and buy a song, my book will get deleted from the Ipod. -
Ipad2 gives me ""accessory is not supported" message w/ VGA adapter that I used lots of times before. Now it's not working. Why? and how do I get it back to normal functioning?
I used the (Apple branded) VGA adapter lots of times last year. Now I got back to one place I used it many times and it does not work. When I restart iPad with the adapter connected, I get the "accessory is not supported"message. But that same accessory WAS supported before.
This is very annoying as I planned a whole bunch of presentations starting this week to do with my iPad2 and that adapter.I received the same error message, "Accessory Not Supported" from both the VGA and DV video adapters I purchased, both were boxed direct from Apple. However, to bypass this problem I simply clicked on Photos icon on iPad2 and flipped through photos until it displayed on my projector. I then exited the Photos app and my home screen displayed fine on the projection screen.
Some logic issue with the video adapters, but launching Apple Photo app initializes the video adapters then they work fine for mirroring after that.
Platform: iPad2
IOS: 5.1.1
Best regards! -
I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?
We want you to love your software update pitbullmommy71! When did you update your phone? Have you tried going into phone settings and set up your notifications as you would like them? It can take a few days for your phone to normalize after the update, but this may be a bit much. Some apps may no longer be compatible with the new software so you can try running phone in Safe Mode or do a Hard Reset to see if this improves your phone. I've seen where some have completed a Hard Reset after the update and downloaded all same apps, and phone works flawlessly now. However, if you'd like to try Safe Mode first, (which is where all 3rd party apps are disabled), you can certainly try this for 24 hours to see if improves.
Safe Mode: http://vz.to/1i0XGEW
Hard Reset: http://vz.to/1GrhWqy
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport -
When I installed Yosemite when I open safari my dock at the bottom disappears how do I get it back
when I installed Yosemite when I open safari my dock at the bottom disappears how do I get it back?
Use View -> Status bar ; and click on it so the tick/check mark appears.
Note in the next version firefox 4 the status bar is being replaced see [[What happened to the Status Bar?]], and if you want something similar you will then need to use an add-on. -
I dowloaded ios5 for my iphone4, and when i finished the backup i lost all the music and all the videos i bought from the iTunes store. How can i get it back?
Backup do not contaiuns music or apps, you will either need to resync them from your itunes computer, or you can go to purchase history in itunes or app store app and go to purchase history and redownload them.
-
The "recently used programs" section on the start menu has disappeared - how do I get it back?
On the start menu, the top few programs are those that I use frequently. There used to be a line, and underneath the line appeared the programs that I have most recently used (other than the frequently-used programs above the line). This bottom section has disappeared - how can I get it back? Running XP with Firefox 33.1.
This is a Windows question, not a Firefox question. Try using a search like www.bing.com/search?q=restore+recently+used+programs+windows+xp for help.
-
"Reply" and "Forward" and "Move" have disappeared rom my email, so I have to go into "mailbox" in the top bar. How can I get them back?
under the "view" menu open custimixze toolbar. Then drag those from that list back up to your tool bar.
-
hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...
Just do a restart. It seems to clear it up.
-
As stated above, I used to have Google as my search engine now it is Norton Safe Search. How can I get Google back?
See these threads about searchqu:
*[/questions/816181]
*[/questions/790833] -
i bought 3 songs from itunes and when i upgrade my iphone all songs disappeared. how do i get them back?
Sync it the same way you got it on the device to begin with.
-
Okay, I'm going to try and make as much sense as I possibly can without confusing people. I hope someone can help! So when I downloaded the iOS 7 update one 'major' change I noticed was that my album art in iTunes had automatically changed for me. It was really cool, more up-to-date, and overall enjoyed how it looked. Made it look a lot neater than my own album art I had put on there. Now, when I downloaded the new iOS 8 update I notice that all my album art when back to its original picture which I had put on there. How do I get it back to where it was when I downloaded the iOS 7 Update?? Any help would be greatly appreciated! I know this isn't the most "dying for help" question, but I'm curious anyways to why it has changed. Thanks!
Sorry no backup - no pictures.
Yes phone will automatically backup to icloud when on wifi and phone is charge, but your phone storage was full so it stop backing up.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
iCloud: iCloud storage and backup overview
When your phone was connected to your computer, you should've seen an autoplay which would've allowed you to import your pics to your computer as you would a digital camera Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
I have been syncing songs from my wife's account. Now when I go to update apps it lists her apple id instead of mine to do the update. How do I get it back to my apple id? Thank you.
Were the apps downloaded from her ID or yours? If they were from hers, only her ID can be used to update them. If they were from yours, you can change the ID under Settings > Store > Apple ID > Sign Out, then sign in with yours.
Maybe you are looking for
-
Ignore carriage returns in select statement
Within Oracle Report builder, I am using a select startment select descr from atable "descr" contains carriage returns at the end of the input ie people have enter 'enter' when inputting the data. how do write the select statement to ignore the carri
-
Aperture 3.0.2 or Keynote 5.0.3 Bug: Sharing Media
I was replacing a graphic in Keynote '09, sharing media from both iPhoto and Aperture. There was an image I wanted to use from Aperture. When I looked at it, I discovered the image was crooked, so I straightened it in Aperture. When I tried to bring
-
How To Do Bring Variables From TextFields In Xcode 4 for IOS
hi, i just started making iphone apps this afternoon and i am a COMPLETE noob. i am trying to make a program that does the quadratic formula, but i can't figure out how to imput the numbers and then have it do the math. i want it to use text fields,
-
How to make Hierarkchy variable in BW 3.5?
Dear collegues, I have five profit center hierarchies that I want to create identical reports on. The user should be able to first choose which hierarchy he wants to see, and then the node of the chosen hierarchy. Is this possible? Can anyone explain
-
Re: How to start Weblogic 10.3.5 managed server on port 80
I can start managed server at port 80 but root permission make some deployments of managed server cannot cooperate with adminserver which is run by oracle user, in my case is oam_server1. Server is run but access server is down.