When i visit sites with live streams sites (justin ustream) browser freezes

Hi
I got a huge problem everytime i visit a site like justin.tv veetle ustream freedocast or only a site with a live stream in it my browser freezes and i ned to close it it stops to react sometimes i hear a sound on justin but the picture of the stream is frozen and my browser does not react back
when i watch livestreams on popout it works thats weird
i think it all started after i deinstalled msn but i m not sure about that pls someone help me i tried on ie or firefox browser both same problem
i use windows vista 32 bit version on an asus laptop

Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can also try to reset Firefox:
*https://support.mozilla.org/kb/Basic+Troubleshooting

Similar Messages

Using 3.6.23. When i upgrade, trouble with Lloyds tsb site.

Using 3.6.23. When i upgrade, trouble with Lloyds tsb site. One of my accounts has code like>br all over it. Also when i want to access a specific account it logs me out. Cannot upgrade as cannot use internet banking. Any ideas? edit

After I loaded 5.5, then removed it and loaded 3.6 again, I had no problems.
Then my hard drive died and I installed a new one.
Then I downloaded ONLY 3.6 since I already knew I didn't like the changes that 5.5 had made and the kinks hadn't been ironed out. That was in July.
The hesitation problem started recently, toward the end of Sept. I have wireless cable modem that runs 36-54 mbps but in Sept/Oct I was visiting family and distance from their router sometimes meant running at 12 or 24. I thought the hesitation/lagging was due to that. BUT
Since coming home in mid Oct., although nothing about my home connection has changed, I am finding this lagging/not responding/hesitation problem continues AS IF the connection were slow but router/modem/internet connection are all intact.
This is what made me wonder if anyone else is experiencing this/reporting it to Firefox. Apparently not.

Problem with live streaming video after system updates

Dear all,
I hope you can assist me on this.
Yesterday, I downloaded the following automatic updates: iLife Support 9.0.4, Remote Desktop Client update 3.4, Mac OS X Update Combined 10.6.7, Airport Utility 5.5.2.
After that, I could NO MORE watch live streaming channels. To be precise, l can properly hear the sound, but not see the video.
I wish to underline the fact that before installing the automatic updates listed above, I had a clear sound and video of all live streaming sites.
I downloaded the latest versions of JAVA and Flash, but unfortunately they didn't solve the problem.
Therefore, I am quite sure the live streaming disfunction has to do with the system automatic updates. Is there any way to uninstall yesterday's updates without compromising the various softwares and OS performance?
What else could be if not related to the system updates?
Looking forward to hearing from you. Thanks in advance.

Stan,
I hadn't heard of gspot before. I downloaded it and it looks like a nice, handy tool. Thanks.
After running it, I didn't see anything that caught my eye as unusual (corrupt file, unknown codec, etc.) I have posted a screenshot at the following URL if you care to look.
www.cbvideo.com/gspot/gspot-out.jpg
Now, let me add to the mystery. I was just able to burn it without incident with Encore 1.5 and the same chapter mark locations. There are only two things I can think of that would be possible causes. 1) something quirky about CS3, even though I've not had any prior problems in two years with it for my business OR 2) the file had become corrupted when moving from the capture computer (the older computer with 1.5) to the newer computer (with CS3). As the file seems to be okay on the 2nd computer (plays fine in WMP and imports into both Premiere and Encore), I'm leaning toward #1.
I have been able to successfully work around the problem to finish this job for the client, but I'd still like to know what's going on for future reference. If anyone has other ideas, please let me know.
Robert

How to live stream vp6 from a browser/swf file.

Hello,
Currently we have a swf file application that runs in a browser and takes the live video stream from the camera on the computer and streams a live sorenson spark stream to the fms 3.5 server.
Question is:
How to live stream vp6 from the browser/swf file on the camera computer, instead of the sorenson spark. (We seem to be stuck only on sorenson spark).
Thank you.

Hi Vince,
Jay has explained it about as best as can be done. What you have now is a
SWF that lives in a browser. With Flix, you can eliminate the SWF
altogether. Or if there is logic that still will require the SWF, then both
Flix and the SWF will live in the browser at the same time (and can talk via
ExternalInterface).
fyi .. When using Flix, if Flix does not eliminate the SWF altogether, you
will remove from your SWF all logic for acquiring Camera and Microphone. As
Jay has reiterated, Flix Publisher will now be doing all that.
If your SWF includes logic other than video/audio, e.g. maybe text chat,
then you may need logic in your SSAS to associated the video from Flix with
anything else from the SWF since each will have its own NetConnection to the
FMIS application.
In case it might help, following is On2's heavily commented JavaScript for
invoking Flix Publisher:
http://publisher.on2.com/fp_doc/3-1-5-5/samples/scripts/flixpub_conf.js
And the full docs for the Flix SDK are here:
http://publisher.on2.com/fp_doc/3-1-5-5/index.html
hth,
g

FMS 3.0.4 - Possible to have captions with live stream?

Is it possible to have captions with a live stream? I can do it just fine with a VOD stream, but have been unable to figure out how to do it with a LIVE stream, if it's even possible.

So you are saying your custom video player shows no video playback but in same set up Stock video Component which you are talking about works fine. Is the server under your control? I mean did you try debugging your custom video player - when you say there is no video playback - do you see connection is still alive or connection closes. Is there anything logged in FMS logs to indicate any issue - check application logs of App you are connecting and also other logs like core/edge/master logs.

How to move iWeb site with missing Domain.sites file

I've been asked to host a friend's iWeb site now that MobileMe is no longer an option. The problem is that the MacBook it was created with is long gone and the only original files remaining are the image files for the site. No Domain.sites file. They are also not sure which version of iWeb was used, if that even matters. Initially I was thinking we could just access the existing site using ftp and go from there - upload the site to my hosting account and use Dreamweaver to maintain it, but everything I've read seems to point to 'Not gonna happen that way'.
Is there a way to transfer an existing iWeb site hosted on MobileMe to a new hosting account and be able to work on it with another editor, all the while not having the original Domain.sites(2) file?
Thanks much,
Mark

Quite a few people are moving to other drag and drop style editors like Sandvox and RapidWeaver although they aren't really any better - just more expensive.
I advise people not to use iWeb for new sites and just to keep it going to update existing ones until they are defunct or rebuilt some other way.
I quit using iWeb about a year ago due to the fact that it, and similar apps, can't create responsive designs for mobile devices although I did figure out a stop gap design for iPhones...
http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html

BufferTimeMax with Live Streams

I have a video-chat program that uses FMS and I'm trying to use the bufferTimeMax property on the subscribing NetStream, but it doesn't seem to work. When I manually throttle my download speed, the live stream from the other client just lags and becomes more and more backed up. When checking the bufferLength and liveDelay at this point, it does show values over 0 but it's not reflecting how backed up it really is, and no matter what I set the bufferTimeMax to, it always traces as being 0.
I'm publishing to Flash v. 10.3 using Flash CS6 pro. Publishing to v. 11.2 doesn't help.
Code sample:
videoNS.bufferTimeMax = 3;
trace(1, videoNS.bufferTimeMax);
videoNS.play(streamName, startParam);
videoNS.bufferTimeMax = 3;
trace(2, videoNS.bufferTimeMax);
This returns:
1 0
2 0
Any ideas?

Are you trying to use on AIR 3.0 (and later) for iOS? If yes, then bufferTimeMax property is not supported. You can check following link for more details:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/NetStream.htm l

Firefox freezes when i visit websites with videos on the background or i watch videos.I have windows 7 and the laatest version of mozilla.

I have windows 7 and the latest version of firefox.When i watch videos on youtube or visit websites with videos on the background mozilla freezes. I tried to disable all the extensions and plugins but it had no result.I didn't had this problem with versions of mozilla previous to 4.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Please suggest driver for microsoft lifecam studio for to work with live stream procaster

I have microsoft life cam studio using to broadcast live through live stream procastrer. I am using mac mini with mac os lion 64bit.But default driver for this studio cam is not supporting to go live with proper crop and quality settings. Can anyone provide driver for this camera ?

Hi, no idea really, but perhaps see if this could work for what you want...
http://www.google.com/url?q=http://www.bensoftware.com/securityspy/&sa=U&ei=QUGH T4z4K4WciQL436yGAw&ved=0CBEQFjAA&usg=AFQjCNEC9fzmWGOiPtM0kRHyzfST3Kh5jQ

Problems when scrubbing through timeline with live update on

Hey guys! I have a problem. Sometimes when I scrub through my timeline in AE with live update on and I try to get to a frame that hasn't been rendered yet, AE freaks out. On my windows taskbar, multiple instances of AE seem to populate the taskbar (although none of them are selectable) and the screen flashes in between my desktop BG and AE. Any thoughts? thanks!

Check the Event Viewer for the exact cause of the crashes. sounds like the same old driver crashes, which could be your graphics card or another component on your system like audio devices. Also verify your device manager for any devices that may be flagged and repair their drivers. This can go down to trivial things like your SATA controlelr driver or the temperature monitoring of the chip sending wrong signals when it supposedly gets too hot...
Mylenium

Safari major issues with live streaming

I installed the OS X update when it was release this week to my mac. When I went on to watch the masters or golf channel live stream they will not load. this is a major issue. how can I fix this?
Reinstalled flash player & restarted computer
Still doesn't work
the streams work in chrome and Firefox
help!

1. System Preferences > Flash Player > Advanced > Delete All
    Press “Delete All” button under “Browsing Data and Settings”.
2. Install Adobe Flash Player.
    System Preferences > Flash Player > Updates
    Press the “Check Now” button.
    http://get.adobe.com/flashplayer/
    Download it and quit Safari from Safari menu in the menu bar.
    Follow the prompts to install Adobe Flash Player.

When I want to watch live stream, the buffer comes on all the time. I have 32bit, server is wildblue, highest option

32 bit laptop, wildblue, highest speed. Live stream is choppy. it doesn't run smoothly

I had this exact same problem- Found a suggestion on a simular thread that fixed it. Right Click anywhere on your screen to get to Display Properties. Find out the make and model of your video card(in my case it was Nvidia). Go to their website and to the driver download link. Download the updated driver for your card and follow the instructions to install.

When I go to watch live streaming on certain sites it says I can't

The site says that it is having communication problems with wmp. How can I fix this so I can watch the site?

Use the iSwifter browser from the app store. Works for most flash content.

Has anyone here have any exp with Live streaming broadcasting

Good day.
Has anyone here have any exp with broadcasting a live event using Apple Mac and assoc. software?
We have our own domains, desktops etc., but we need to broadcast an event AND charge for this specific event, i.e., Pay direct, paypal or is there a service that does this???
Any advice, guidence and/or links please would help.
Thank you very much

It's "Kappy".
Here are some links I found that may help:
http://images.apple.com/server/pdfs/L31754AQTStreaming_TBfinal.pdf
http://docs.info.apple.com/article.html?artnum=75002
http://developer.apple.com/opensource/server/streaming/index.html
http://www.soundscreen.com/index.html
http://www.apple.com/quicktime/streamingserver/faq.html

Preoblem with live streaming

Hi,
Now I am trying to develop a web cam capturing movie. I
created two swf's, one for broadcasting and the other for
receiving. The broadcaster captures the live video from web cam.
After connecting the receiver with media server, it ll displays the
video capturing by broadcaster. When i am doing this in the system
where media server is installed, its working fine. That means
broadcaster swf and receiver swf are placed in the system where
media server is running But when i tried it by opening the
broadcaster swf form system where media server is running and
receiver swf from any other system, its not working. The code that
i used for broadcaster is attached following:
Broadcaster:
startstop_pb.enabled = false;
connect_pb.onRelease = function(){
if(this.label == "Connect"){
status_txt.text += "Connecting..." + newline;
this.label = "Disconnect";
nc.connect(rtmp_txt.text);
} else {
status_txt.text += "Disconnecting." + newline;
this.label = "Connect";
nc.close();
nc = new NetConnection();
nc.onStatus = function(info) {
status_txt.text += "NC.onStatus> info.code: " + info.code
+ newline;
if (info.code == "NetConnection.Connect.Success") {
status_txt.text = "Connected to " + this.uri + newline;
startstop_pb.enabled = true;
createNetStream(this);
createNetStream = function(nc){
ns = new NetStream(nc);
ns.onStatus = function(info) {
status_txt.text += "NS.onStatus> info.code: " + info.code
+ newline;
mycam = Camera.get();
mycam.setQuality(25600, 0);
mymic = Microphone.get();
mymic.setRate(11);
ns.attachVideo(mycam);
ns.attachAudio(mymic);
myvid.attachVideo(mycam);
startstop_pb.onRelease = function(){
if (this.label == "Start Broadcast"){
status_txt.text += "Starting broadcast" + newline;
this.label = "Stop Broadcast";
ns.publish(streamname_txt.text, "live");
} else {
status_txt.text += "Stopping broadcast" + newline;
this.label = "Start Broadcast";
myvid.attachVideo(null);
myvid.clear();
ns.close();
The script that i used for receiver is following:
Receiver:
startstop_pb.enabled = false;
connect_pb.onRelease = function(){
if(this.label == "Connect"){
status_txt.text += "Connecting..." + newline;
this.label = "Disconnect";
nc.connect(rtmp_txt.text);
} else {
status_txt.text += "Disconnecting." + newline;
this.label = "Connect";
nc.close();
nc = new NetConnection();
nc.onStatus = function(info) {
status_txt.text += "NC.onStatus> info.code: " + info.code
+ newline;
if (info.code == "NetConnection.Connect.Success") {
status_txt.text = "Connected to " + this.uri + newline;
startstop_pb.enabled = true;
createNetStream(this);
createNetStream = function(nc){
ns = new NetStream(nc);
ns.onStatus = function(info) {
status_txt.text += "NS.onStatus> info.code: " + info.code
+ newline;
myvid.attachVideo(ns);
ns.play(streamname_txt.text, -1)
I have already wasted 3 days because of this issue. So please
help me. I am the only one in my office for flash scripting. And i
am bginner having 4 months experience. Thats why i joined here. So
plz help me.

Hi,
I am not able to connect any applications.For example, i
just tried with other application provided by adobe(Hello Server),
in which if the connection is established with flash media server
that i am running locally, i had written a code in the server side
to display a text in the client side.But its working in my system.
I tried this application as i did with web cam capturing
application on different system.Thus it was not working. Is there
any problem in the source code I had written.Did u refer it.I
wasted many days for this problem.So please help me.I want to fix
this problem as soon as possible.
Thanks and Regards,
Sreelash.S.

When i visit sites with live streams sites (justin ustream) browser freezes

Similar Messages

Maybe you are looking for