When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

Similar Messages

  • How is the best way to read data from an iphone if you lost your itunes data after a crash?

    How is the best way to read data from an iphone if you lost your itunes data after a crash?

    How is the best way to read data from an iphone if you lost your itunes data after a crash?

  • ITunes is telling me it can't sync data from my iPhone or iPad at the moment. Any ideas why, please?

    IiTunes is telling me it can't sync data from my iPhone or iPad at the moment. Any ideas why, please?

    Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

  • I can not synchronize data from the prelude livelog

    I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
    The Prelude can not apply metadata in it.
    please can someone help me

    Hi -
    When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
    We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
    Michael

  • 've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • Can I retrieve data from my iPhone 4 hard drive without the SIM card?

    Can I retreive data from my iPhone 4 hard drive without the sim?

    There is no hard drive in an iPhone, it is all solid state memory. If the phone is working you can always copy content from it. If it is not you will need to restore and activate it, and that requires a SIM card.

  • I can not send email from my iPhone or iPad its goes out from the iMac ok. I get SMTP is incorrect. any suggestions?

    Having problems sending email from my iphone and ipad. Im getting a SMTP is incorrect error. Has anyone had this problem?
    Spent 3 hours with internet carrier still not resolved. Everything is fine on the imac.

    What is the error message provided if any?
    If the email account is provided by your ISP, does your ISP have an authenticated SMTP server?
    Are you unable to send email with the account using your iPhone or iPad when connected to the same wi-fi network or internet connection as your Mac with your ISP?

  • I can not get data from the sensor lsm330dl-i​2c (LM3S8962)

    Hello
    Can you please tell how to configure the i2c for LSM330dl. The application my program, and part of the datasheet.
    thank you
    Attachments:
    545.jpg ‏35 KB
    1.jpg ‏206 KB
    2.jpg ‏178 KB

    Hi,
    I was taking a look at your code and the following example LabVIEW Embedded for ARM I2C Example  and there may be an issue with the front panel not updating correctly.  Can you use breakpoints and probes to check the wire values?  This will let you verify whether the values are actually coming through and just not updating on the front panel.
    Also are you able to run that example (you'll have to create a new ARM project to use the example with the LM3S8962)?  The example looks very similar to what you are already doing.
    Cheers,
    Scott A
    SSP Product Manager
    National Instruments

  • I can't access data from my iPhone 5 when off wifi

    I bought my iPhone 5 two weeks ago from Optus, Australia. I loaded up my back up from the iPhone 4, it all seemed ok. However when I was off wifi I had no data access. I replace the SIM card and Apple even replaced the handset. Neither of those helped.
    But finally today, I figured it out with some help from Optus.
    I backed up the phone, wiped it but did not restore it from the iTunes backup. I treated it like I'd never had an iPhone before. It worked. It appears there was something corrupt in my back up file.
    Everything is in the cloud, mail, calendars, contacts etc and of course all my apps were in iTunes along with music, podcasts etc. so I haven't lost anything.
    I just wanted to share this in case you're having the same problem. 
    Cheers
    Derek

        Yakkity-Yak,
    Let's get your services functioning again!  I know it must be frustrating not being able to access anything.  Have you restarted your iPhone?  What zip code are you located in?  Are others experiencing troubles in the area?  Please fill us in on some details so that we can better assist. Thanks!
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Can I transfer data from one iphone to another (but later rather than at the same time)

    I currently have an Iphone 4 that was provided through my company but I am changing employment next month (as well as country) and was hoping to store all my current iphone software and data (hopefully on my computer) and then purchase a new Iphone 4 in which to update with said data.
    If anyone can offer insight in how to accomplish this I would be grateful!

    if the iphone have not been synced with another computer then just sync it with yours
    if it have then you cant syncing it with your computer would then clear the iphone and adding the info from your itunes to it

  • Since the iOS 7.0.2 update, my iPad retina display is now experiencing white blurred screen, can you help me from this?

    Since the iOS 7.0.2 update, my iPad retina display is now experiencing white blurred screen, can you help me from this?

    Restore the device via iTunes on the computer.

  • ITunes for Windows freezes when importing a library. I have a large but not huge library of mostly iTunes purchased music on two authorized computers and would like to sync the files, export the library as a playlist, and import it on the other computer.

    I am running iTunes for Windows 10.2.2 on Windows 7 Home. I have my iTunes library on both this computer and another authorized machine running Windows 7 Professional. I have a large but not enormous library, as I'm one of those people who doesn't pirate, use torrents, borrow from a dozen friends, or whatever other shades of gray you might imagine. It's mostly iTunes purchases with my old CD collection imported. I have started using the following technique to sync my libraries between my two authorized computers, an ability which you can probably all agree should one day be added to iTunes -- that would be different from Home Sharing, because the music would be stored locally and thus available on the road. With the added benefit of the entire library being backed up on the other machine in real-time. Anyway, when I switch from my desktop to laptop and vice versa, I use the following technique:
    Connect both machines to the home network. One machine is the "Active" machine, which has most recently been used for iTunes media, purchases, ratings, etc.
    On the "Active" machine, File-->Library-->Export. Save the file as "Library.xml" on the shared drive of the other machine.
    Right-click "Library.xml" where it's been saved, and open another file that has two lines in it: The root path of the iTunes library on one machine and the root path of the iTunes library on the other machine.
    Do a find/replace all in Notepad to make the library XML file point to where the files will be saved on the "Inactive" machine.
    Run Microsoft SyncToy to synchronize the files between both music libraries; the most recent files win. This avoids copying the entire multi-gigabyte library over the network.
    Open iTunes on the "Inactive" machine.
    Go to Music, Select All, Delete. Keep files.
    Do the same for Movies, Music Videos.
    Go down to Playlists, select the top one, hold down the delete button until they're all gone.
    File-->Library-->Import Playlist. Choose the "Library.xml" file you saved.
    First a status bar comes up that says, "Importing library." It has the continually-scrolling progress bar, not the one that starts on the left and steadily creeps right. Then after about 30 seconds, that clears out. Wait. Typically a few minutes. Eventually a status bar will pop up saying something like, "Evaluating gapless playback information," or something like that.
    The "Inactive" computer is now the "Active" computer. I can now play my library, it has all my playlists and metadata from the other machine.
    Delete all the duplicate playlists named "Music," "Genius," "Purchased," and "iTunes DJ."
    Well, I just upgraded to iTunes 10.2.2 a few days ago and tried to do this again like I've done it dozens of times before. Now, iTunes just goes unresponsive after the library import. It got through the "Importing library" bar to the long wait and stopped. I can still multiprocess and use other programs, but iTunes is hovering back there not responding to clicks. Task Manager doesn't seem to think iTunes is using my CPU, and I don't see my hard drive rattling. Any thoughts on why iTunes might hang up when importing a large library?
    ... Also, please help lobby Apple to come up with a network sync tool built into iTunes for a user with multiple authorized computers. Something different than Home Sharing so I can pull my laptop off the network and still have the synced library with me. And all my metadata changes will sync. The technique I use seems a little kludgey, don't you think?

    iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).

  • My iTunes got deleted off a (no longer working) computer. Is there a way I can transfer all content from my iPhone onto iTunes on a new computer? I want to update my phone, but do not want to lose any music off it when syncing it.

    My iTunes got deleted off a (no longer working) computer. I have lost all music & data that was on this original itunes. Is there a way I can transfer all content from my iPhone (music & photos) onto iTunes on a new computer? I want to update my iphone (3GS), but do not want to lose any music off it when syncing it. Help please!!

    By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are using a new computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
    http://www.wideanglesoftware.com/touchcopy/index.php
    Once you've done that, do the following in the order specified:
    1. Disable auto sync when an iPod/iPhone is connected under iTunes>Preferences(under the edit menu if using Windows)>Devices in itunes.
    2. Make sure you have one contact & one event in the supported applications(Address Book & iCal or Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
    3. Connect your phone, iTunes running, DO NOT SYNC at this point.
    4. Store>Authorize this computer.
    5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
    6. Right click in the device pane & select reset warnings.
    7. Right click again and select backup.
    8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
    9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
    You should be good to go.

  • I tried to create a new google calendar in ical, but they did not show up, I tried this several times. Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can i clear them from this list?

    I tried to create a new google calendar in ical, but they did not show up, I tried this several times.
    Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can I clear them from this list?

    See https://bugs.downthemall.net/ticket/2147
    Google Search Bug
    Reported by: openid:nathan wride Owned by:
    Priority: major Milestone:
    Component: Polish/Usability Version: 2.0.10
    Keywords: Google search instant save bug Cc:
    Operating System: Windows
    Description
    Hi Guys
    I have found a bug/annoying thing that occurs frequently on google. When searching, DTA trys to download the search...
    I'll try to attach a screenshot.
    Attachments
    [https://bugs.downthemall.net/attachment/ticket/2147/Screenshot.png Screenshot.png] Download (113.0 KB) - added by openid:nathan wride 4 weeks ago.
    The screenshot that shows the bug.

Maybe you are looking for