When I was using iMovie an error message came up saying to please move the play head to an open audio section when I was in searching for audio to insert into my project however there was no audio in that section of the project I was trying to add it to.

Not able to insert audio into IMovie due to an error message

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

Similar Messages

  • TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

    when attempting a restore,  as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • I tried do install mavericks from the App Store. Then a error message came up saying: an error has occured

    Any way I can get mavericks ???

    Did the error message show up when you began the installation or when downloading? If during installation, you may have the installation app in your Applications folder -> file name is "Install Mac OS Mavericks.app".
    If the download failed you can attempt to resume it or, if that doesn't show up as an option, you can try to download again.
    Note that before Mavericks begins an installation, it checks your hard drive to see if there are any errors on the drive and, if there are, you'll get an error message. If you go through the installation again, write down the specific error message.
    Good luck,
    Clinton

  • Is there a way to create a .dmg file for a DVD inserted into the system

    I am wondering if Snow Leopard has integrated any tools that can create a .dmg file for the CD or DVD inserted into the system?
    If not, any recommendations for freeware 3rd party tools? Thanks

    Insert the disc you want to create the .dmg from, then choose the disc in the left hand pane of Disk Utility. From the File menu, choose New > Disk Image from (name of disc).
    EDIT: This is basically how it's done; however, there may be other steps involved, depending on the type of disc you're trying to copy and what your goals are with the .dmg. If you provide more details about what you're trying to achieve, maybe we can help you further.
    Message was edited by: Tuttle

  • I was using my old iPhone 4 as an iPod for 4  months when one day I got this error message saying "phone is deactivated visit your local to reactive" ... what the heck??? now the freakin thing won't even charge!!!

    I was using my old iPhone 4 as an iPod for 4  months when one day I got this error message saying "phone is deactivated visit your local to reactive" ... what the heck??? now the freakin thing won't even charge!!!

    Nope. I've already turned off cellular data. It happens regardless, as soon as it is done powering on.
    I suspect it might just be built into the phone's firmware to do that... and I have to hit "ignore" whenever it happens, but I just wanted confirmation of that...

  • I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player.  The video comes onto the screen, but immediately freezes, and then disappears.  An error message comes up saying that DVD player unexpectedly quit.

    I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player.  The video comes onto the screen, but immediately freezes, and then disappears.  An error message comes up saying that DVD player unexpectedly quit.  My MacBook operating system is Mac OS X, version 10.5.8.  DVD Player is App version 5.0.3, framework version 5.0.7.
    However, the DVD+R works on both my Dad's and my brother's laptops.  My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9.  The DVD Player is version 4.0.  My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2.  The DVD Player is App version 5500.26.1 and framework version 5.5.0.  The DVD+R plays fine on their laptops, but will not play on mine.
    Anthony

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually. No luck

    I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
    Any ideas for a fix?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I was using iMovie yesterday and it was working. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?

    I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
    Where does the imovie.library reside? where do the events and projects reside?

    Hi winkydb,
    Thanks for visiting Apple Support Communities.
    If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
    Show or hide the Libraries list
    You select libraries and events in the Libraries list.
    To show the Libraries list: Click the Show button on the left side of the toolbar.
    The default location for iMovie libraries is the Movies folder in your home folder.
    You can find this information here:
    iMovie (2013): Work with multiple libraries
    http://support.apple.com/kb/PH14745
    Best Regards,
    Jeremy

  • I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

    I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
    Kris

    It means your file is too large to fit on a single layer disk.
    Recompress to keep the overall size (audio,video and menus) below 4.5GB
    x

  • I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

    I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

    Quoted from their FAQ's:
    I got an error message saying my device is blocked. Why did this happen?
    There are two reasons this could happen: You have deleted your account or you have been banned due to violation of terms of service.
    - You have deleted your account.
    When you delete your account, you agree that your device would be blocked for at least one month. This policy is enforced in order to protect users from stalkers. (If the system allowed users to create and delete their accounts any time they wanted, the Block feature would be compromised and wouldn't be able to protect users effectively.) Please understand this is not a punishment but a security measure intended to keep all of our users safe.
    - You have been banned due to violation of terms of service.
    Users of this mobile application are required to comply with our terms of service and instructions provided by our service team. The most common violations include, but are not limited to: Creating multiple accounts, uploading pictures not complying with our terms, and abusing the Report feature. In most situations, you will get a warning before you are banned from the app. If you receive a warning from our service team, please read it carefully and take it seriously. If anything is not clear, please contact user support for clarification.

  • HT1277 I recently used icloud on my phone to back up my phone.  After I did that my gmail stopped working, so I deleted it and when I go to add my gmail account I get an error message.  It says cannot get mail, user name or passwork incorrect? What do I d

    I recently used icloud on my phone to back up my phone.  After I did that my gmail stopped working, so I deleted it and when I go to add my gmail account I get an error message.  It says cannot get mail, user name or passwork incorrect? What do I do?

    Hi,
    Just wanted to say I found out the answer. I should have looked first to see if anyone else was having the same problem but I didn't. 

  • I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

  • SAML assertion was used to sign a message, the verification of signature us

    CR325776, CR301621, CR331147
    When SAML assertion was used to sign a message, the verification of signature used to fail with NullPointerException.
    This problem has been resolved.
    We have 9.2 MP2 as our ALDSP weblogic server. Is there any way to do a smart Update from MP2 to MP3?
    Can it be done behind the proxy, ie., download the patch and install ?
    Our Unix server is Solaris. Please let us know.
    Thanks.

    we got the update and this has been resolved as we have installed weblogic 10.

  • TS3297 Hi, I've setup my new mini ipad today, restored a backup from icloud and all is fine.  However, when I try to download my music, they almost completely download then an error message pops up saying "unable to download songs" - can anyone help pleas

    Hi, I've setup my new mini ipad today, restored a backup from icloud and all is fine.  However, when I try to download my music, they almost completely download then an error message pops up saying "unable to download songs" - can anyone help please?

    So it appears iCloud/iTunes Match isn't the issue - the error message would seem to be complaining about where the music is being downloaded to. So with this in mind:
    In iTunes select Preferences and select Advanced. The iTunes media folder should be set to /Users/<your account>/Music/iTunes/iTunes Music. <your account> would be whatever your user account is. If you see something else there I'd guessing it is a folder you don't have permission to write to.

  • BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next?

    BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition

    Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
    I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
    iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
    End result, a successful restore to factory settings and a happy 14 year old.
    Hope this helps others.

Maybe you are looking for