When i would like to send the sine wave to osilloscope

when i send this sine, to osilloscope, i dont get a simple sine but with a delay. in my VI i already changed the units of timer from 50 to 500, but no no change. why it is like this? can somebody please tell me? i am attaching the VI thanks
Attachments:
041005_functiongenerator.vi ‏197 KB

Dear Sebastian
In the same Vi you have seen that i want to send 128 periods to oscilloscope. some times i want to send 4 periods and some times may be about 1 million periods.
now what i want is if i send 128 periods to osilloscope,it must display these 128 periods/cycles and then stop, if i send 1 million periods, then it display 1 million periods and then stop. if i break
some where in between then afterwards when i resume, it must dsplay/generate the rest of the periods on osilloscope. i know at Ao start we can not break, resume any more, because then it not in our control any more, but i think this break resume is possible before Ao write just after creating wave array or when Ao write is writing in buffer.but i dont know how to implement it? any hel
p would be appreciated.
thanks

Similar Messages

My PC Harddrive died along with all the CD's that I have saved to the Itunes library. My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library. Is this possible?

My PC Harddrive died along with all the CD's that I have saved to the Itunes library. My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library. Is this possible?

Yes, by using a third-party utility such as Phone to PC or Phone to Mac.
Also see How to dowload purchased music and Downloading past purchases from the App Store, iBookstore, and iTunes Store

Why does my airport utility always ask me to connect an ethernet cable when I would like to use the extended network option?

Why does my airport utility always ask me to connect an ethernet cable when I would like to use the extended network option?

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

I would like to create a sine wave in Illustrator. How do I do this in a simple way?

Hi,
As the title suggest I would like to create a sine wave in illustrator. I know that applying the zig zag effect to a line and choosing "smooth" will create a cosine wave. But is there a simple way like that to create a sine way? Or any way at all?
Thanks for the help!
ekmanch

1. start with the zig zag effect
2. with the scissor tool cut where the ends of the red line is - I made the rest blue to make it clear
3. delete the blue segments to get this
4. using the black pointer or scale tool stretch horizontally to match the reference
5. using the white pointer select one of the smooth anchor points, and using the Scale tool and holding Shift drag to scale constraining horizontally until the curve matches the reference
6. select the other smooth point and with the scale tool selected press the Enter key on your keyboard twice to apply the previous scale
click the image to see it larger

HT6030 I would like to send an e-mail to a group of people I have the group created, but when I drag it to bcc or to it will not attach. can anymon help me with this?

Help I would like to send an e-mail to a group of people, I have the group created, but when I drag it to bcc or to- it will not attach. can anymon help me with this?

In a new email message window start to type the name of the Group you have in Contacts/Address Book in the 'To' field - it should self-complete when it recognises the name.
(Note: this only works with 'normal' Groups and not Smart 'Groups').

HT2486 I am sending an email to a group which I have created in my contacts. I would like to hide the list of people's emails but cannot see how I can do that. Can anyone help please?

I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?

Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

I would like to send contacts via wireless in vcf format in an e-mail. iPhone doesn't even see the attachment. Is there a special file contact type for iphone?

I would like to send contacts via wireless in vcf format in an e-mail. iPhone doesn't even see the attachment. Is there a special file contact type for iphone?

I must be more specific:
I am attempting to send a vcf from a Windows Computer using Outlook to another Email account that syncs with an iPhone. When I read the e-mail on the iPhone, I can't see the vcf file. But I can see the contact on outlook as a VCF.

I would like to send a text message to a cell phone when certain alarms occur.

I would like to send a text message to a cell phone when certain alarms occur.
I have read some of the other post which don't give a straight forward answer on how to accomplish this task. Also the newest post on this topic is from 2005. I'm sure things have changed since then.
Please help me with a step by step solution.
Thanks for your help!

You may use U.C.ME-OPC to send text messages to any cell phone. You may use a cellular modem that is connects to a serial COM port. In addition you may send an email that will be received as an SMS or eamil. If you use a cellular modem you may also send commands (for example: change or query values) from your cell phone to Lookout through U.C.ME-OPC.
U.C.ME-OPC connects to Lookout using OPC or DDE.
To learn more visit Control-See web site at www.controlsee.com .

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

No don't restore your iphone. I've done that several times & it has never worked. -I still have deleted contacts in my iphone texts. *However if you do restore it you will not lose all your data, pics, text messages etc if you backup in iCloud. It restores back to original phone. Very nice :). Anyhowwww....
I JUST figured it out!! :))). Remove the contact from recents.
Start a text. You should see the deleted contact. All the way to the right of the name is a symbol. The symbol is a circle with "i" in the middle. Click that symbol then in red lettering click "remove from recents".

When I open a saved document in pages, then close it right away without making any changes, why does it ask if I would like to save the page or all new info will be lost?

I have a few saved documents and when I open them to view them quick, sometimes when I close it, I will get asked if I would like to save the document or all my new info will be lost. I didnt change anything so Im not sure why it asks me that. When I open the document again, all the info is there and nothing is different. Thanks

Unless they were Word documents, Pages has done nothing really, but it is updating date information in the file.
It is annoying but just ignore it and don't save.
Peter

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.

HT5312 When I got my Ipod Touch 3 years ago, my mum set up an Apple ID in her name & email address. I have since got an Ipad & set up my own Apple ID. How can I update my Ipod to my Apple ID? I would like to sync the Ipad and Ipod, but cant get past this

When I got my Ipod Touch 3 years ago, my mum set up an Apple ID in her name & email address. I have since got an Ipad & set up my own Apple ID. How can I update my Ipod to my Apple ID? I would like to sync the Ipad and Ipod, but cant get past this ID problem?

Hi AnnieAnneok,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
First, I would suggest you backup your iPod touch and transfer purchases to your computer:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Confirm your Apple ID is set up and updated with the correct information:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Then, in Settings on your iPod touch, sign out of your iCloud Account and your iTunes Store account and sign back in with the correct Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
Judy

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

I would like to send multiable photos by email ,at the moment i can only send one at a time thanks

Hello ,I would like to send multitable photos by Email . at the moment i seem to only be able to send them one at a time thank you marie

I do not see an issue here ....just add a submit by email button at the end of each section and enter the email address that you want in each.

I recorded a panel presentation on my Ipod and would like to edit the recording on my itunes so I can export the recording and send it to my colleagues over the internet. I was able to import the recording to my itunes library but need help editing it.

Hello, thanks in advance for your help. I recorded a panel presentation on an ipod and would like to edit the audio recording to just one portion of the recording. I was able to import the audio into my itunes 11.1.3 music library but I have not been able to edit the length of the recording. I followed an online tutorial and was able to edit when the recording starts and stops on the recording but I haven't been able to edit out the parts of the recording that I dont want. Also when I try to export it to my Desktop or to Garageband (not sure if that helps or not) I am not able to export it. It is currently a .WAV file. I would like to edit the length of the recording and then export the file onto my desktop. I would like to email the presentations to my colleagues online so I could also use advice on how to make it a smaller file since it is current 945.6 MB.

iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).

When i would like to send the sine wave to osilloscop​e

Similar Messages

Maybe you are looking for

When i would like to send the sine wave to osilloscope