When im Answering my Phone it doesn't work Properly?

When i Answer My Phone it doesnt work properly like i say Hello and they cant hear me i have to speack louder for the person im talking to hear me.

Have you installed iTunes on this computer before? If so, use [this article|http://support.apple.com/kb/HT1923] to help guide you through removing iTunes and all of it's components and then try [downloading iTunes|http://apple.com/itunes/download] again (choose to 'Save' it to your desktop instead of 'Run') and then re-install the application.

Similar Messages

My volume buttons on the side of my I phone 4s doesn't work properly what do I do?

Hi-

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

My alerts work when I'm on the phone such as text message Facebook n Instagram but when I'm off the phone it doesn't work how can I fix this :(

My alerts work when I'm on the phone such as text message Facebook n Instagram but when I'm off the phone it doesn't work how can I fix this :(

Hello, Trillmonroe.
Thank you for visiting Apple Support Communities.
Try forcing all open applications to close and power cycle the device as outlined in the first two sections of the article below. If the issue persists, try the troubleshooting steps in the second article.
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Cheers,
Jason H.

I downloaded a ringtone to my phone and it works when I play it but it doesn't work when I assigned it to a contact. Help. I'm using ios 7.

I downloaded a ringtone to my phone and it works when I play it but it doesn't work when I assigned it to a contact. Help. I'm using ios 7.

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

Morning Lupoipia,
Thanks for using Apple Support Communities.
If you can't be heard by someone who is calling, take a look at this article:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Best of luck,
Mario

Ios 5 when i answer a phone call, application audio overrides phone call

often an app i used earlier to play audio starts up again when i answer a phone call... It is not actively in use at the time the call comes in, just has to be one of the apps used recently. I have had to manually forcequit app to get it to stop plaing and overwhelming the phone call.
This happens on 3gs as well as 4s. Same ios level.

That sounds like a problem with the app it self. What app is it? However, it is possible a reset will fix that. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This will not affect data in any way.

When i answer my phone i can barely hear the caller, volume is turned up

when i answer my phone i can barely hear the caller, volume is turned up

Hi saintmary82,
If you are having a hard time hearing people through the receiver, take a look at the article below for some suggestions to get it sorted out. Start with cleaning the receiver and making sure your iPhone is up to date. If you continue to have issues, then you may want to contact Apple Support for further assistance.
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
https://support.apple.com/en-us/HT203800
Take it easy,
-Norm G.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

The cable doesn't work properly when connected as data cable.

Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
Farhan

Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

Phone Redirection doesn´t work after Publishing

I published an alreday working Version of my Website with Muse. The Redirection to the Phone Resolution doesn´s work anymore, although all Pages are still in place in the phone directory. The Redirection worked yesterday after the first publishing of the phone Resolution, but after the publishing today, only the desktop sides are available.
the URL is www.la-moellmann.de (la-moellmann.businesscatalyst.com)
I solved the Problem by adding the Muse javascript Redirect-Script from a non-BC Site (via FTP):
<script type="text/javascript">
Muse.Redirect.redirect('desktop', '', 'phone/index.html', '');
</script>
Nachricht geändert durch adobe_mhcom

Hey Ch4rl3s3,
I would recommend that you try to restore the software on your iPhone as a troubleshooting step to see if the issue persists after that:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Upgraded from 3g to iphone 5 - my att phone connection doesn't work - any ideas what i a doing incorrectly, upgraded from 3g to iphone 5 - my att phone connection doesn't work - any ideas what i a doing incorrectly

just tried installing new iphone5 on MAC -
my att phone conncection doesn't work for phone calls
any idea what i might be doing incorrectly

no, but have you called AT&T and reported the issue?

My iPhone 5 speaker suddenly doesn't work properly! The volume is so low I can't hear the phone ring. I've restored and updated and done everything I can think of. Please help!

My iPhone 5 speaker suddenly doesn't work properly! The volume is so low I can't hear the phone ring. I've restored and updated and done everything I can think of. Please help!

Sorry, I think you got scam.
Last thing you can try is restore as new:
http://support.apple.com/kb/HT1414

When im Answering my Phone it doesn't work Properly?

Similar Messages

Maybe you are looking for