When iMovie '11 renders SD for iPad the quality goes way down. Is there a way to do this that does not compress as much?

It appears that DV/DVCAM SD files are about 300 MB per minute. When iMovie '11 compresses a rendered movie for iPad the size is less than 30 MB per minute. It greys out the otherwise available HD options in favor of "large", but this level of compression seems to really decrease the quality, creating unacceptable levels of quantization error noise and color banding. Is there a way to render a finished edited movie created in iMovie '11 or iMovie 5 that will not do this? I could compress in HandBrake but there is apparently no way to send the editing metadata to it from iMovie. Any suggestions?

I can't answer your first question.
The default location for the imovie Theater.theater package is in your user / Movies folder.

Similar Messages

When I open safari on my iPad, the old pages are opening, is there a solution to have always the same page when starting safari?

When I open safari on my iPad, the old pages are opening, is there a solution to have always the same new page when starting safari?

THX Carolyn, I have do it, but it was the case before, without doing this.
since yesterday I have this matter, before not! It is a pity, my iPad is 1 year old, and always the iPad start page and only this when starting safari, I thing I have change something in the preference, but don,t know what, and where.

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

When I go into Ibooks under categories the text is upside down and backwards. Has anyone had this happen? How do I correct?

When I go into Ibooks under categories the text is upside down and backwards. Any idea how to correct?

The Cookie section is in the 'Privacy'-Tab now.
Not sure when this happened...
Stefan

Am I the only one whith an iTunes (11.1.3 on Windows 7) that does not sync my playlist on my both my iPhone 4G and iPdos classic 5G

I have multiple Playlists organized by folders (multiple folders but all at 1 level, no folders within folders) and I trying to unload some (cristmast music) and uploading other playlists instead.
From iTunes view everything seems fine, as usual, but the update doesn't show on my iPod App. On my iPhone I'm seeing my Christmist playlists and not the ones that iTunes show as "checked and loaded" in iTunes when reconnecting my iPhone to my PC's USB port. Samething happens with my old iPod Classic. ...BUT!
But if I edit a playlist from my iPhone, after sync, I can see that change of that playlist in iTunes on my PC!? So the download from iPhone works but the upload from iTunes to iPhone does NOT work.
My Hardware:
- Windows 7 on a Dell Laptop
- iOS 7 on iPhone 4G (32 gb)
- iPod Classic 5G (32 gb)
I consider my self a power-user, using iTunes since 2002 and I just can't find a solution. I've been able to sync my playlist with both devices for the last time on December 15th 2013 but I think that was before updating to version 11.1.3.
Any body knows about a problem synchronizing (updating) playlist on devices running iOS 7? This seems like a major bug to me since any of my devices can't sync completly.

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

Private browsing worked fine on the last version, but does not seem to work at all in the new 4 version, so what is the problem? I have uninstalled and reinstalled it several times but that does not solve the problem.

My points above lay out the problem and I get messages telling me it can't find the files....Why is it not working when it did just fine right up until you came out with version 4???
Any suggestions? I may have to go to another browser, but I have always like your product best.

You are welcome. There has never been a need to move that one before, but try it since you can always put it back.
If the same, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

Basically, I have 2 problems:
1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
My camera:
HD: 1080p
Settings: At Hd
2)
Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
IS ANYBODY OUT THERE? : )

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

HT204053 What in the **** is going on! is there no way to get your problems solved

Hi I have difficulty with all of this new technology and when i go to seek online help the pages do not lead anywhere. Telsta dont want to know about apple problems and I have had to open a new apple id as my old one was locked out. Even when I have all of the details it will not let me reset the password. It does not recognise that I registered with my date of birth. It states that it is not linked to my account! Surey there is a person that I can speak to or a proceedure that actually allows me to inform these people that I have an issue. I have bought $100's of music that I now cannot access!
please advise!

Hi JohnOMahoney,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues with the track coloring in Logic Pro, you may find the following articles helpful:
Logic Pro X: Change track colors
http://support.apple.com/kb/PH12924
Logic Pro X: Change the color of regions in the Tracks area
http://support.apple.com/kb/PH13048
Regards,
- Brenden

With 5th gen nano, how to display album artwork during playback at all times, it stays on for a few seconds and then the screen goes black? Is there a way to play and see artwork, at all times (using with a aux. speaker)

I have a 5th gen nano, and I play it often on a aux. speaker. I would like the album artwork to display at all times while playing it here. Right now it plays for a few seconds on each song, and then goes blank. Can this be changed?

The artwork turns black or the screen's backlight turns off? If the backlight turns off, simply disable the backlight timer, but keep in mind this will significantly reduce your iPod's playback time and battery life.
B-rock

When i drag an item to trash, the pop up message to confirm delete appears. But my trash icon does not show it being full.

Hi
IN my HD/ desktop, whenever I drag an item to the trash, instead of the usual trash icon appearing "full" (ie with trash inside), I get a message confirming me to empty trash.
How do I revert to the usual of the trash icon appearing full and allowing me to drag files out and then decide.
Thanks!

dvp2012,
See the X Labs -> http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

I keep getting Error Code 4002 in iTunes when I try to update my iTunes Match. I have turned off iTunes Match, then reinstalled it, but that does not seem to work. I also get another Error Code (4010) sometimes. Can someone offer advice?

I keep getting Error Code 4002 in iTuens when try to update my iTunes Match. I have turned off Match, then reconnected, but the code keeps coming. So does Error Code 4010 at times. Can someone help?

iTunes store, App Store, iTunes Match and various other services have been down for the past several hours. Apple's System Status page at http://www.apple.com/support/systemstatus/ now shows them back up but they are STILL NOT up for me or many other users. The error codes 4000 series refer to connection errors, I've gotten several from 4001-4010 all day. We're kind of at the mercy of Apple at this point. It would be nice if they would give us some notification about their problems since we are paying for their service.

Continually get opps this is embarrassing connection to the server had to be reset hit send " Firefox must resend this data " Does not happen on any specific web site. In fact it may or may not happen on the same site. I have ff3 a ff4 is not compatible

I cannot cut past the error because it "blanks out" the edit menu can't use to use. Get a blank page have to refresh amost every time

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Can i go back to the previous version, i have a plug in i need to use that does not work with ver. 4

I have norton's password manager which i use many times per session. It is not supported by MF 4.0. I really need to go back to the previous version.

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

Getting error ORA-20001: This person does not have preferences for the sele

*) I got user_id by following query
SELECT USER_ID, USER_NAME, FND_USER.*
from FND_USER where user_name = '205174';
*) resource_id by following query:
select * from APPS.PA_PROJECT_ASSIGNMENTS where RESOURCE_ID in (select RESOURCE_ID from APPS.PA_RESOURCES_DENORM where PERSON_ID
in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ) ;
*) person_id by following query:
select * from APPS.PA_RESOURCES_DENORM where PERSON_ID in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ;
and
Hi,
When I am running following query to submit timesheet, getting following warning msg
anonymous block completed
ORA-20001: This person does not have preferences for the selected effective date
Following is query
set serveroutput on size 1000000
DECLARE
l_tbl_messages hxc_message_table_type;
l_message fnd_new_messages.message_text%type;
i pls_integer;
l_app_blocks hxc_block_table_type := hxc_block_table_type();
l_app_attributes hxc_self_service_time_deposit.app_attributes_info;
l_time_building_block_id number;
l_new_timecard_id number;
l_new_timecard_ovn number;
l_bb_id number;
l_resource_id hxc_time_building_blocks.resource_id%TYPE := 3595; -- XPCPAY
l_start_time hxc_time_building_blocks.start_time%TYPE := fnd_date.canonical_to_date('2011/10/17 00:00:00');
l_measure hxc_time_building_blocks.measure%TYPE := 1;
l_element_type_id varchar2(80) := 'ELEMENT - 50809'; -- Jury Duty
l_comment_text hxc_time_building_blocks.comment_text%TYPE := '';
l_deposit_process hxc_deposit_processes.NAME%TYPE := 'OTL Deposit Process';
l_retrieval_process varchar2(250) := 'BEE Retrieval Process';
BEGIN
fnd_global.apps_initialize ( user_id => 3850 -- XPCPAY
, resp_id => 3595 -- Self Service Time
, resp_appl_id => 809 -- HXC
hxc_timestore_deposit.create_time_entry ( p_measure => l_measure
, p_day => l_start_time
, p_resource_id => l_resource_id
, p_resource_type => 'PERSON'
, p_comment_text => l_comment_text
, p_deposit_process => l_deposit_process
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_time_building_block_id => l_bb_id
hxc_timestore_deposit.create_attribute ( p_building_block_id => l_bb_id
, p_attribute_name => 'Dummy Element Context'
, p_attribute_value => l_element_type_id
, p_deposit_process => l_deposit_process
, p_app_attributes => l_app_attributes
hxc_timestore_deposit.execute_deposit_process ( p_validate => TRUE
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_messages => l_tbl_messages
, p_mode => 'SUBMIT'
, p_deposit_process => l_deposit_process
, p_retrieval_process => l_retrieval_process
, p_timecard_id => l_new_timecard_id
, p_timecard_ovn => l_new_timecard_ovn
-- OUTPUT MESSAGES --
DBMS_OUTPUT.put_line ('l_new_timecard_id = ' || l_new_timecard_id);
DBMS_OUTPUT.put_line ('l_new_timecard_ovn = ' || l_new_timecard_ovn);
if (l_tbl_messages.COUNT <> 0) THEN
i := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS(i));
l_message := fnd_message.get_string ( appin => l_tbl_messages(i).application_short_name
, namein => l_tbl_messages(i).message_name
DBMS_OUTPUT.put_line (l_tbl_messages(i).message_name);
DBMS_OUTPUT.put_line (l_message);
i := l_tbl_messages.NEXT(i);
END LOOP;
rollback;
else
commit;
end if;
exception
when others then
DBMS_OUTPUT.put_line(SQLERRM);
END;
/

Please check the following MOS notes:
ORA-20001: This Person Does Not Have Preferences For the Selected Effective Date [ID 876324.1]
ORA-20001: This Person Does Not Have Preferences For The Selected Effective Date [ID 761470.1]
Troubleshooting Guide for HRMS API Errors - ORA-20001 and APP Errors [ID 152259.1]
''This Person Does Not Have Preferences For The Selected Effective Date'' Message [ID 287581.1]
Diagnostics - Setup - Time and labour Person - Test failed [ID 397214.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

When iMovie '11 renders SD for iPad the quality goes way down. Is there a way to do this that does not compress as much?

Similar Messages

Maybe you are looking for