When Import a file with wrong name system will behave Hang.

Hi,
On Portal at Mitigation->utilty->import .
then type any file name to the text.
System will hang how to resolve ythis issue.
thank

Hi,
This is a known issue with fileupload UI element, when you specify a invalid path or file name.
Following link will give you details of the issue, you will see the explanation and work around from microsoft.
http://help.sap.com/saphelp_nw04s/helpdata/en/b3/be7941601b1d09e10000000a155106/frameset.htm
Regards
Ayyapparaj

Similar Messages

  • When importing, creates folder with wrong date

    I found a curious bug in Lightroom 4.2.
    If I have pictures taken after 23:00, Lightroom creates an import folder in the next day, but the dates in the files are correct.
    Example:
    The file's date is: 29/11/2012 23:19.
    However if I hover my mouse over the image in the import dialog:
    The date that appears is 30/11/2012 00:19. Here's the detail:
    After you import, you get the image in the wrong import folder, but the meta on the image is correct:
    I've started to notice this before, but always thought of a wrong date on my camera. Just noticed that this happens with my camera, iPhone, and any other photo that has a time after 23:00.
    Do you know if there is a solution for this?
    Thank you in advance,
    Manuel Azevedo

    Does your computer time match with your camera time? Summer-/winter-time apart?
    The reason, why I am asking this: the map module auto-assumes that these times match (rather than asking you in which UTC-time zone your image time stamps should be interpreted when tagging from a gpx-track).
    Could be that something similar is happening in import module if you let LR auto-create destination folders based on date-time.
    I have no experience with this as I prefer to explicitely give the names of the new destination folders myself.
    Cornelia

  • Importing wav files with dead space?

    I'm curious if anyone else has experienced slow loading times/overview calculations when importing wav files with lots of dead space into Logic?
    Working on vocal comps from a Pro Tools session. Logic has no problem importing full takes (24-bit, 44kHz wav files that basically start at the beginning of the song). But alternate takes that might have complete silence until the 3rd chorus, for example, take forever to load. 10+ minutes in some cases.
    If anyone can shed some light on this or share a similar experience, I'd appreciate it.
    Tech details, if it helps:  Macbook Pro 2.53 GHz Intel Core Duo, 4GB RAM, Lion 10.7.2, Logic Pro 9.1.6

    Well, iTunes has no ability to undo edits, so the problem may lie elsewhere. Please try the following extra-extra-careful procedure:
    - Edit the file and save it.
    - Exit the editor.
    - Make sure you know filename/location of the edited file, and that you are not confusing it with some unedited copy of the same song.
    - Play the edited file in some other player than iTunes and make sure the edits are as you wished.
    - Now, add the file to your iTunes library.
    Pls try this and let us know.
      Windows XP  

  • Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

    I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
    I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
    So if the file is there why can't spotlight/finder find the file??
    If it helps I get this from the terminal when checking if indexing was enabled.
    $ mdutil -s -a
      Indexing enabled.
    /Volumes/Data:
    2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
      No index.
    /Volumes/Time Machine Backups:
      Indexing and searching disabled.
    /Volumes/Time Machine Backups/Backups.backupdb:
      Indexing enabled.

    Hi Danielle,
    Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
    Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
    I hope this is able to help.
    Anna L
    Applications Engineer
    National Instruments

  • I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    Hi
    The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
    If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
    (Or just set the fader manually in MS)
    CCT

  • Get 'Generic Error' when attempting to import .mov files with transparency?

    I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
    I have uninstalled the DVCPro Codec, but it didn't help.
    I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
    I've seen this issue on the web, but never a solution? Anyone?

    Hi Terence,
    I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
    Regards,
    Søren

  • Separator page prints out with wrong name when printing from Outlook 2010

    Working with Windows 7 Enterprise, Outlook 2010.  We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building.  Printing from IE, Word, etc. all work fine, and it'll print
    out the correct username on the separator page.
    When anyone attempts to print an Outlook email, it instead prints out my username.  We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

    Hi
    As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
    To create a custom separator page file, use a text editor such as
    Notepad. On the very first line, type one single character, and then press
    Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
    Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
    In the Print Manager, select the printer that you want to use the separator page file with, and then click
    Choose Properties on the Printer menu.
    Click
    Details, specify the name of the desired separator page file in the
    Separator File box, and then click OK.
    Note:
    Put the custom separator page file in one of the following locations:
    In the %Windir%System32 folder.
    In a folder whose path contains a SepFiles folder. For example:
    Drive:\Folder\SepFiles\Subfolder
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • Itunes Crashes when importing Music File or Folder on Windows 7 64-Bit with Itune 10.5 and update ios 5

    Itunes crashes when importing Music File or Folder ever since i updated it yesterday

    You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
    tt2

  • Live view putting a file with no name

    So i have a problem (don't know if it's a problem really, but at least an annoyance) with the Live View and Preview in browser features.
    When use them, the file transfer window pops up (even if i have told it to stay "hidden") showing the following:
    Started: 29.5.2013 15.47
    index.php - same - not transferred
    Connections:Raspberrypi.php - same - not transferred
    styles:common.css - same - not transferred
    - error occurred - Access denied.  The file may not exist locally,  may be open in another program, or there could be a local permission problem.
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files skipped: 3
    Files with errors: 1
    Finished: 29.5.2013 15.47
    So the weird lines are those marked with red. It looks like its trying to put a file with no name or extensions at all - and i don't think i have such files on my site. Also the permissions are correct on both the server and my Mac.
    My web browser opens up and shows the site perfectly, and if I'm using the Live View, the site shows up well too. The thing is every time I hit F5 to refresh, i have to close the file transfer window. Annoying.
    I don't know if it matters but I'm using a Raspberry Pi as my home web server. It has Apache2, PHP 5, MySQL and vsftpd running, and I have been able to use them with no problem earlier.
    Hopefully someone knows what I am doing wrong here...
    Thanks in adnvance!

    Have you enabled Automatic Upload on SAVE?  I never FTP files on Save.  Way too much risk of error and it takes focus away from my work which is very distracting.  See screenshot.
    Nancy O.

  • While saving multiple attachments from mail, files with same name are added and not replaced

    While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

    Bjørn Larsen a écrit:
    Hi all
    Hope to get some help with Elements Organizer.
    I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
    That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
    Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
    Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
    Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
    I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
    However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
    You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

  • Files with "alien" names in directories with very long path names

    Hi all,
    first of all - I dont know if this is the right forum for my Question,
    but I could not find any better ;-)
    I have a problem with some files with "alien" names with MIXED characters from different foreign countries
    (e.g. "Φέτα (τυρί) 只有沙盒或您的用户页可以用作測試ורת המבחנים בחינוך פור.txt").
    Sometimes - whenn those files are exists in a directory with a very long path name,
    then the windows api fails to handle these files.
    For example GetFileAttributesW() returns error 2
    and ntQueryDirectoryFile does not return this file in the list (etc. pp.)
    I have this behaviour not with other files in those directories (e.g. "abc.txt")
    and also not when those names are a little bit shorter
    or the directorys name is not too long.
    So I guess, there is a bug either in the API or in the file system...?!
    I know that such a file name is a generic one,
    but I have a situation where I have to handle any file with any name -
    even in directories with very long path names...
    So please no suggestions like "use shorter paths" or "convert it to a short name"....
    thx in advance and Best regards,
    dp.

    No need to call, your MSDN subscription has few free support incidents.
    Chat with the rep to submit an incident.
    Or find their phone number
    here.
    Good luck,
    -- pa

  • Error 3307 when importing build file in Essbase

    We have a level-based dimension build file, which is a CSV file with 5 fields and some 13,000+ rows. We are getting 75 errors in the .err file when importing the file using a load rule. An extract of the .err file is as follows:
    \\Record #4242 - Incorrect Parent [G] For Member [G4S] (3307)
    C057038317,C057038317 - G4S,G4S,G,Other Accounts,Customer Group,Customer
    \\Record #11502 - Incorrect Parent For Member [UG Ltd] (3307)
    C043678386,C043678386 - UG Ltd,UG Ltd,U,Other Accounts,Customer Group,Customer
    \\Record #11503 - Incorrect Parent [U] For Member [UG Ltd] (3307)
    C044178034,C044178034 - UG Ltd,UG Ltd,U,Other Accounts,Customer Group,Customer
    I have double checked the existing members and there are no duplicate member names / conflicts here. Can anyone please suggest what the issue might be? I found a similar post at the below but this was not fruitful:
    Incorrect Parent Error during Dimension build type "Add as child of"

    This typically means the member was added to the outline already to another parent either prior to the dimension build or within the dimension build and in your dimension build settings you do not allow moves of members.
    For example your member G4S If you look in your outline, I'll bet you find it (either as a member name or alias) and its parent is not "G"

  • Importing RAW files with keywords from Bridge

    Hi everyone,
    I downloaded the trial version of Aperture and have now imported RAW files (Canon 20D) with keywords and IPTC data applied via Bridge.
    The import of the RAW files was no problem however the files lacked the keywords and IPTC data, which I applied in Bridge.
    I also tried to import JEPG files and here Aperture could show me keywords and IPTC data.
    Why does this not work for RAW files? What do I have to do in order to get it to work?
    Thanks in advance for your advise
    /David

    When you add metadata (keywords etc.) to most proprietary raw formats (including Canon .CR2 files), Bridge doesn’t know how to embed that data in to the file—Canon and other manufacturers haven’t told Adobe (or anyone else) what the structure of these raw files is and how metadata can be stored within the file itself. Therefore, Bridge creates a ‘sidecar’ file to go with the raw file: the sidecar file sits alongside the raw file, with the same filename and a .xmp extension. This sidecar file contains any metadata you may have applied, as well as adjustments you have made in Adobe Camera Raw.
    Unfortunately, Aperture doesn’t read these sidecar files when importing raw files, so you lose any adjustments from ACR (not surprising, since Aperture is obviously a different raw converter to ACR so the adjustments would be different anwyay), but also you lose any metadata you may carefully have applied.
    There may be an answer, however. But it’ll cost. That would be to use iView Media Pro (which has recently been bought by Microsoft, but a Mac version still exists). There is a 21-day free trial for iVMP—since my suggestion is to use it as a temporary conduit for importing all your existing raw files into Aperture, you won’t necessarily have to pay the £129 GBP asking price for iVMP (others can debate the morality of that statement, however; fortunately I already owned iVMP and so didn’t have to worry about such things). I believe iVMP can read the XMP sidecar files created by Bridge. Create a new iVMP catalogue with all your raw files which you want to move into Aperture. It should bring all your existing metadata into the iVMP catalogue as well.
    Then, import all the raw files into Aperture. As you have found, they’ll be without any metadata. As long as the filenames are the same in both the iVMP catalogue and the Aperture library, you can use Adam Tow’s application Annoture to transfer metadata from the iVMP catalogue into the Aperture library.
    Sort of circuitous, but possible. If only Aperture read the metadata from those sidecar files, eh? If I’m wrong in thinking that iVMP imports the XMP metadata, then what you can do is get Bridge to convert all your .CR2 raw files into .DNG files. If you don’t know about DNG, read about it at Adobe. But briefly, Bridge is able to embed its metadata into the DNG files and iVMP is able to read that embedded metadata when importing DNG files into the catalogue. I know that for certain: I used iVMP and DNG files (from my own 20D) before using Aperture; when I started using Aperture (which I love, now) I used Annoture to transfer all my metadata from iVMP into Aperture.
    Perhaps someone else will explain this better than I.

  • Part of path lost when importing autogenerated files

    Hope someone can help as can't find anything on the forum about this.
    Have two Framemaker 8 books, one of which contains all the files for a future publication, including LOT, LOF and IX.  This is the full publication but most of it is still heavily in draft.  The second book represents the first release of the publication and has only a small subset of agreed content.  The idea is that the publication will grow in time.
    The second book is in a subdirectory below the directory containing the first book and the full set of files.  It has its own LOT,LOF and IX.  It also links up to a few of the files above, the ones that are in the first release. The LOT, LOF and IX contain contain references only to these few content files. Have done it this way rather than put everything in one directory, as there will be a number of subsets, with multiple PDFs produced for review from each before the finalised PDF containing the current content to be released at any one time, and don't want them all in the same directory with the management problems that would introduce, and risk of people selecting the wrong version of a LOT, LOF etc. The content files with the actual text in are not duplicated in this subdirectory; the book just links to them in the directory above itself.
    All was well on one PC but needed to work on a second also. This second one has a different directory structure and it isn't possible to change it because of the different policies in place.  So copied the main directory and the other subdirectory beneath to the new PC.  All appeared OK; the lower level book found the files above etc.
    To clarify the structure on the second PC is this:
    \dir0\dir1\dir2\Content directory - place where the first book plus the preface, glossary/index and the other files in the draft book - the main body
    ..dir0\dir1\dir2\Content directory\dirA - place where the second book and LOT, LOF, IX are for the book to be published first (the .. represents some other directories from the root)
    (On the first PC, it was \dir0\dir1\Content directory\ and dir0\dir1\Content directory\dir A - and this is the shorter path from the root)
    When trying to generate the PDF on the second realised something had gone wrong and then found that the problem began in FMkr. The symptom is this:
    The LOT, LOF and IX autogenerated files are fine within the book, their links can be clicked and they go to the source files (in the directory above).  BUT these files aren't part of the actual publication.  The LOT and LOF are embedded in a Preface (one of the files in level above) and the IX is embedded in a Glossary and Index file (ditto). When these are imported into the Preface or Glossary as appropriate, whether by reference or by actually including the file, the result is the same - the links become non clickable and an error is saying that the file can't be found. The path is partly truncated - it excludes the directory where the files actually are.
    So for a link to the Introduction.fm file, FMkr says it is looking for it as ..dir0\dir1\dir2\Introduction.fm and not ..dir0\dir1\dir2\Content directory\Introduction.fm where it actually is.
    This occurs even if the whole structure is copied elsewhere to a place higher in the hierarchy. It isn't possible to reproduce the structure on the first PC because of the configuration of the second PC.  Have tried taking the LOT etc. out of the second book then regenerating them from scratch - they are fine, the links in them are fine, but when imported into the other files, the links miss out the directory which actually holds the source files where the links point to. Must emphasise this did not happen on the first PC.
    Any ideas gratefully received.

    Thanks Sheila, have now overcome my problem with editing the post (duh!)
    Hope the below is clear enough as cannot send an actual screen shot. Have discovered that the number of directories above in path is a red herring because the problem now happens back on the original pc when the book and files are copied back to it.
    Have tried creating a test book with only the index, glossary/index and one content file linked from directory above (i.e. test book at dir c level) and it is OK in the autogenerated index but then does the same truncation when the index is imported into glossary/index, i.e. looks for the source file in dir A.  If the source file is copied into the test book directory, the file removed from book and then the local copy added back in and the book updated/import redone, the links work. so it will find it if the source files are in the same directory.  However, this always worked before with lots of test runs and a few real reviews too.
    Subject: FrameMaker General Discussion Part of path lost when importing autogenerated files
    It would be really helpful if you might do a screenshot  of the File Manager hierarchy of folders and insert them into your posting, maybe use callouts to annotate the various significant levels -- a visual would really, really make it much easier to interpret what you're describing.
    >
    Sorry, not coming out very clear compared to viewed on PC. Directories are A, B, C - Dir A caption "The Directory above the content directory. Links in the subset book in Directory C look in here after they are imported into other files in the subset book"
    Directory B says "Directory B, the content directory, with introduction, glossary/index and other content files, plus main book, main index, main LOT, LOF. Some of the content files in here are also linked to from the subset book in Directory C"
    Directory C says "Directory C containing the subset book with its own index, LOT, LOF, plus links to introduction, glossary/index and a couple of other files in Directory B.  The links to files in Dir B work in the autogenerated LOT, LOF etc, but not when imported into content files (linked files in directory B) although this used to work. They now look for the content files in Directory A instead"
    Hope that makes it clearer.

  • IPhoto 9.2.3 crashes when importing jpeg files in OS 10.6.8

    iPhoto 9.2.3 crashes when importing jpeg files in OS 10.6.8. Has worked perfectly until recently. Camera: Sony.
    Help! Thanks

    Not sure if this is it... found this in CrashReporter
    Process:    
    SystemUIServer [154]
    Path:       
    /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
    Identifier: 
    com.apple.systemuiserver
    Version:    
    1.6 (298.17)
    Build Info: 
    SystemUIServer-2981700~7
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [149]
    PlugIn Path:  
    /Library/Application Support/iStat local/extras/iStatMenusDrives.menu/Contents/MacOS/iStatMenusDrives
    PlugIn Identifier: com.iSlayer.iStatMenusDrives
    PlugIn Version:
    ??? (2.0)
    Date/Time:  
    2012-07-25 12:15:25.589 -0400
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:     
    239771 sec
    Crashes Since Last Report:      
    1
    Per-App Interval Since Last Report:  3525 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                 
    4C22FC88-8025-4C80-AEF8-A730365FC6C5
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Crashed Thread:  3
    Application Specific Information:
    abort() called
    *** Terminating app due to uncaught exception 'NSGenericException', reason: '*** Collection <NSCFArray: 0x1006cb6a0> was mutated while being enumerated.<CFArray 0x1006cb6a0 [0x7fff70a29ee0]>{type = mutable-small, count = 2, values = (
    0 :
    Name = (null)
    Mount = /
    UUID = B059E233-0145-3B10-842A-1D92DEB14682
    Icon = NSWorkspaceIcon
    BSD = disk0s2
    Type = Physical
    Mounted = 1
    Ejectable = 0
    Boot = 1
    Whole = 0
    Enabled = 0
    1 :
    Name = (null)
    Mount = /Volumes/debramullins
    UUID = DE000000-0000-8305-6600-000000000000
    Icon = NSWorkspaceIcon
    BSD = afp_2iqwWi0v4JKK3BWuNP2Eh7vn-1.2e00000a
    Type = Network
    Mounted = 1
    Ejectable = 1
    Boot = 0
    Whole = 0

Maybe you are looking for