When importing files, folders are not updated?
Could anyone please help?
Since I reinstalled Lightroom on a new harddrive (after a crash) whenever I import photos into my library, they appear in "Previous Import", but they are not visible in the destination folder. Even if I, in the import screen, make a new folder, this folder does not appear in the library, folders column untill I manually synchronize the parent folder.
Could anyone give me advice as to how to correct this problem?
Thanks
Micha
Thanks for your answer.
Do you have the option "Do not import duplicates" enabled in Aperture's Import panel?
Yes I have.(But it should anyway show folders. It doesn't scan automatically all folders and subfolders. So I should see something).
When did this problem start? Directly after you upgraded to Mavericks or before?
It started few days ago. I did not update anything or I did not install anything new software etc.
What is the file system on your drive "Kovalevy"?
It should be HFS or HFS Plus? I use these disks only with this Mac.
Is it formatted for Mac? MacOS Extended (Journaled)? Is the drive directly connected? And the what are the permissions on this drive? Have you tried to set the "Ignore Ownership on this volume" option? You can set it in the "File > Get Info" panel for the drive in the Finder: This panel will also show you the file system in the "General" brick.
It is formated MacOS Extended (Journaled).
Yes I tried "Ignore Ownership on this volume". No effect.
I don't have any problems with Finder, Final Cut etc. I can open projects, copy files etc.
Thanks for your time.
Br,
Marko
Similar Messages
-
Imported files h264 are not importing correctly ?
Hello community hope fully some one understands my issue.
I have several 4k vid files from an Ae template . The files are great working in Ae and Bridge cs6.
When imported I get a solid green image ,the frame rates are less than 1 fps or just 1 fps?
digging up info for these files says avc h264
Thanks
mike d.
win 7 64bit
gtx 780
32 gbOK, if "Auto Tone" is not set, what are the slider positions after import in the Develop Basic Panel? If they're all at zero, then it really means that you are seeing the results of Lightroom's default rendering of your Raw files. If that's not to your taste, you can try to develop your own default settings to make the image as you prefer to see it.
-
Aperture Library photo folders are not updated in iTunes view
The list of photo folders in Aperture doesn't update which doesn't allow me to select them and sync with my iPad. Selecting ALL would be too many for the iPad (60,000 plus).
I put new photos into Aperture 3.0 and can't get them onto my iPad.
Suggestions?I can't really help, but I have the same problem. I really need to convert one of the RAW images in Aperture to a DNG using the Adobe DNG converter, but the converter can't find the image because the folders haven't updated.
I have restarted Aperture, the computer, all of the programs. Nothing seems to work. I don't know why the folders in the Pictures folder wouldn't match the folders in the Aperture Library. Most of them are the same, why not all? -
Incopy CS4 (mac) - when closing file, changes are not saved
I have a CS4 Indesign document with assignments saved. When the editor works on the file, she is able to save as she goes, however gets a dialogue box about how we are trying to save over an older file with the options 'submit changes, discard changes and I think one other option'.
When 'submit changes' is clicked we re-open the file and find that the changes have not been saved.
We don't understand why we would receive that message since we are hitting save as changes are done while working on the file.
The odd thing is that it doesn't happen on all files. And the dialogue box doesn't always show up.
One thing to note is that we recently changed from a CS2 workflow that we've been using successfully for a few years. Ie. without that particular dialogue box showing up or any save issues.
thanks all!Lr & Photoshop both have the potential to use tiny (xmp) files for storing changes (and never save any other files), and both can save/export big honkin' tiffs, or like-sized jpegs...
If you save files in Photoshop with layers and such stuff, the files can get pretty big.
So, to answer your question: "It depends..." - which files, how saved/exported...
Try some stuff and inspect the file sizes!
Rob -
My file icons are not updating refreshing in finder
I've just upgraded to Lion. Not that impressed all round to be fair. Anyway, one thing that is really niggling me is tha fact that I create a file in Photoshop, change the visual content, and the icon is not refreshing in the finder. The term I would tend to use is 'crap'.
I can confirm that the solution posted by crockej does indeed work, I am not by any means saying that it is a perfect solution, and am sure that it is not the actual fix, but it does work, I landed up having to add JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI all to fy file list and although this was 90% of the missing icons fixed, it still requires more like m4v etc.
Think of this as more of a temporary solution to the problem, but it does work.
This is what my /Users/XXXXX/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt file looks like now.
HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEM E,CONFIG,MODULE,PROFILE,ENGINE,SVG,JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI:Al l Documents
HTM,HTML,HTA,HTC,XHTML:HTML Documents
SHTM,SHTML,STM,SSI,INC:Server-Side Includes
JS,JSON:JavaScript Documents
XML,DTD,XSD,XSL,XSLT,RSS,RDF:XML Files
LBI:Library Files
DWT:Template Files
CSS:Style Sheets
ASP,ASA:Active Server Pages
ASPX,ASCX,ASMX,CS,VB,CONFIG,MASTER:Active Server Plus Pages
CFM,CFML,CFC:ColdFusion Templates
AS:ActionScript Files
ASC:ActionScript Communication Files
ASR:ActionScript Remote Files
TXT:Text Files
PHP,PHP3,PHP4,PHP5,TPL,PHP-DIST,PHTML:PHP Files
LASSO:Lasso Files
JSP,JST:Java Server Pages
JSF:Fireworks Script
TLD:Tag Library Descriptor Files
JAVA:Java Files
SQL:SQL Files
ASX:Windows Media Advanced Stream Redirector
WML:WML Files
EDML:EDML Files
VBS:VBScript Files
VTM,VTML:VTML Files
SVG:Scalable Vector Graphics Files
Thanks to crockej for finding this semi solution for now.
Looking for Knysna Accommodation? -
XML files imported into SPRC are not properly loading associated data into SPRC
Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh. -
I have a list of bookmark folders. When I want to bookmark a page I select "bookmark this page" but not all of my folders are shown. If the folder is not shown I can not get it to be filed in that bookmark folder. How can I get all of my bookmark folders to be shown. When I go to show "all bookmarks" and select "bookmarks menu" all are shown. I am using firefox 8.0.
I have updated to firefox 8.0.1, did not change the problem. When I show all bookmarks I have 11 folders but when I try to bookmark a page only 5 folders are shown not all 11, why?The problem is that not all of my bookmark folders are shown when I want to bookmark a page. They are shown when I "show all bookmarks" Ctrl+Shift+B but not when I want to bookmark a page. The article how to use bookmarks does not solve my problem. The folders are not shown so I can not use them. Why?
-
With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.
Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again. -
When I select my iPod touch in iTunes the buttons are inactive when I try to sort by name, artist etc. Also about half of the links under 'file' etc are not active.
Further to my question, when I plug in and select my iPad 2 I don't have the same problem. I have restored the settings on my iPod Touch and updated both iTunes and iPod Touch software and restarted my iPod touch. Nothing has made any difference.
-
Files that "remember playback position" are not updating during sync
I listen to long spoken word MP3 files that are not podcasts. I have the "remember playback position" option checked on these files. I will add it to my library, sync it to my 2nd gen iPod shuffle, then go play it. The shuffle will remember the playback position fine. When I plug it into the computer again, iTunes used to update the files on my computer with the new playback position from the shuffle. This is not the case anymore. The local files will stay at the spot where they were at the original sync (0:00 in most cases). The files on the shuffle will then go back to 0:00 as well. This is very annoying. Any ideas?
P.S. I'm using the newest Shuffle that was released along with the 4th gen Nano (mine is the 2GB blue).
I know this is supposed to work because I had a silver 1GB shuffle in 2007 that worked fine.
Message was edited by: ajstahlROFL I've named this thread "Shuffle Woes" in my favorites list. I seem to have fixed this strange and VERY elusive problem for now.
I discovered a duplicate music file that had the same metadata as another music file. The only difference between the two files was the name of the physical file on the hard disk AKA the file name. The metadata (tags) were exactly the same. Now that I've deleted one of the two files everything seems to magically work again. Don't ask me!
If the problem resurfaces again I'll be back. No more shuffle woes! -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
File-to-rfc ..database tables are not updating??
hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded --------->Zrfc 0..unbouned
...id --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id ---------->Ztimeticktes-item-operation
.....closingdate ----------->Ztimeticktes-item-exec_fin_date
.....status ----------->Ztimetickets-item-fin_conf
.....comment ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
RamHi..
my mappis is like this..
message message
.message1 message1
..workorders 1..1
..order 1..unbounded -
>Zrfc 0..unbouned
...id -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id -
>Ztimeticktes-item-operation
.....closingdate -
>Ztimeticktes-item-exec_fin_date
.....status -
>Ztimetickets-item-fin_conf
.....comment -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram -
I purchased a new MacBook Pro and when transferring files iphoto did not transfer. I have a question mark in the place of the icon. My pictures are in library but can't properly access iphoto. Thank you
Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff. -
hi can I have a reply to above question: I just upgraded my old versionj 3 of photoshop elements to v13 when I import photos they are not imported in the same order they are mixeds up
In the documents screen - sorry, new to this so not sure if that's the right terminology... Basically the screen showing all documents, if you drag down, there should be two options at the of of the page: Date and Name. Select Name and your list should now be in alphabetic order.
Hope that helps. -
when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.
here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.
Maybe you are looking for
-
When i attach my iPhone the Windows autoplay windows pops up, but the name is now "Apple iPhone" instead of the device name set in the iPhone. Normally the iPhone should pop up in the iTunes woindow, but it doesn't appear, su i'm not able to make use
-
Transfer video from iPhone 5 to my iPhone 4s
How can I transfer a video , approx 5 mins , from another iPhone to my iPhone , mine being a 4 s
-
Hi all, 1. There is one scenario There 2 purchase groups and 10 materials. I want to restrict first 6 materials with first purchase group and remaining 4 materials by second purchase group? How to control above scenario? 2. Kindly confirm, for one pu
-
Hi, I'm trying out both the BEA reference implementation, and the weblogic implementation. The reference implementation works well, except for a bug in parsing. I've noticed that when an element contains only an entity reference as character data, it
-
When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?