When importing Raw into A3, in what format is the picture displayed? Jpeg or tiff.

When importing Raw into A3, in what format is the picture displayed on the screen? Jpeg or Tiff ?

None of the comments you have gotten are particularly useful. The display is independent of format of the file. It's rendering is of the full pixels in the image file that you have imported, modified by any adjustments you have made, or not if you ask to see the Master.
Even if your Master was imported as a JPEG, as seen on the screen it would have been decompressed, and you would see all the pixels (that the screen is capable of). However, a JPEG may have lost some detail in the compression, but when decompressed has the same number of pixels as the equivalent uncompressed photo format -- but some of them may result from interpolation, and not be the original.
Ernie

Similar Messages

When i use firefox with mafia wars none of the pictures display - i think i hit a hide picture button?

using mafia wars, it does not show any of the pictures only the words so it makes it difficult to know where to click. mafia works fine when i open in chrome - so it is something i did while using firefox.

With the site on display, click on the site identity button (for details on what that is see [https://support.mozilla.com/kb/Site+Identity+Button]) and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see [https://support.mozilla.com/kb/Images+or+animations+do+not+show].
Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

I made a Blurb book through Lightroom 5, on another computer, backed it up on an external hard drive and tried to import it into my imac. I got the picture files, but could not get the book I had worked on. How do I find my book?

I made a 'Blurb' book using Lightroom on a computer that was not mine. I backed up the book on an external hard drive and then tried to import the book into my imac. I wasn't able to retrieve my book. The photos I used for the book project are there, but the 45 page book I made is not there.
What do I need to do?

You would need to go to the computer containing the book.
Select the saved book in the Collection panel.
Go to Grid View [ G ] and select all the images [Cmd/Ctrl][A]
File>Export as Catalog and store on media you can use to transfer
Bring this catalog onto your computer
File>Import from another catalog and bring the transitory catalog into your master catalog.
It should bring the images, your collections (including your book) and other settings into your own catalog.

My ipod touch will not be recognized when i plug into computer.....the screen displays the itunes logo with a picture of the charger.....will not do anything else. Does anyone have any ideas???

My ipod is not being recognized. I only get a picture of the itunes logo, and the charger. Can anyone help me.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

What happens to Raw files when importing Raw+JPG from camera to Lightroom Mobile on iPad? Only JPGs are showing up.

Hey I am Brian, and I was wondering how Lightroom mobile works again as in when importing photos directly into iPad using the camera connection kit.? This is for IPad 2. I . Like when importing raw files. now I just did a photo shoot. and I just uploaded them into lightroom 5 on desktop. the raw files are being pushed as smart priviews acroos ipad and iphone. its kinda cool seeing cr2 file showing up on lightroom mobile. when its coming from lightroom 5. but what about coming from camera to ipad.?
I thought you can import a Raw plus jpeg into ipad and it shows up as a jpeg plus raw file. well its not doing that. shows up as just jpeg.
cant wait for next update of lighroom mobile.

With this version of LR Mobile we not support the direct RAW import.
You can vote for this feature request...Lightroom mobile: Ability to import raw files
- Guido

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size?

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size from canon 5d mark iii, in older versions I used to be able to import the files as larger images. It use to have a number of options for the images size. The option now is smaller than the maximum size used to be.

You know what - I'm sorry
I'd had a crazy long all-nighter session sorting out images for a client, then decided - when I should have simply gone to bed - to set up the new photoshop. At the very start I made a silly mistake, tried to sort it out then decided to call it a day, responding to your remarks with the problem still in my head but feeling more and more tired.
Responded again to your comment earlier with the problem still in my head but not in front of me on the screen - however with a fresh head I just turned it all on, opened up PS and today could instantly see what was going on - Oops!
Thank you for being patient with a sleep deprived photographer who must have been getting annoying yesterday
I am officially embarrassed
M

Develop settings when importing RAW + jpeg

When importing NEF files from my D700 I apply the landscape sharpening pre-set and am happy with the results. However on my Fuji X20 I import RAW+jpeg rather than just RAW, in this situation if I use the landscape sharpening pre-set sharpening is applied to the jpeg as well as the RAW resulting in the already sharpened in camera jpeg being grossly over sharpened. If on the other hand I use none for the develop pr-set no sharpening or noise reduction is applied to the jpeg and a minimum amount applied to the RAW file, more or less what I want except I want the higher landscape sharpening applied to the RAW files. Is there anyway to modify the built in pre-sets so that they only get applied to the RAW files when importing RAW+jpeg pairs?
Dave Rosser

I believe the answer is No, you cannot apply a preset at Import time based on file type.
What you can do is after you import, filter on File Type and set it to JPG and apply another preset that changes the sharpening settings of the filtered set of files, then go back and turn off the filter and work with both sets of images as you want.
To filter by File Type, you need to go to Library Grid, enable the filter bar with the backslash \ key if necessary, then select Metadata, and either change one of the existing filter columns to say File Type or add a new File Type column.
Once you have created and applied the filter, you can save it as a filter preset that can be applied by the filter preset selector at the very right and just above the thumbnail strip at the bottom, even in Develop mode.
You might make one for raw and for jpg in case you want to swap between the two, and if you shoot JPGs with more than one camera model, you can add the camera model to the filter criteria.

CS3 Layers disappear when importing map into InDesign

I have an Illustraor .ai file of a map with many layers and when I import it into my InDesign document
some of the layers disappear. When I open the map in Illustrator they are all turned on but in InDesign some seem as they are turned off or transparent. Very frustrating...any help is appreciated!

Thanks so much for your responses. Although I don't complete understand what the issue was becasue I am no Illustrator expert I did find a solution. I found that there were multiple layers within a layer and also many of those layers had paths/compound paths. So I pulled the layers within out and made new separate layers for them all and removed unnecessary compound paths. So now I have many layers instead of a couple layers with multiple layers within. Confusing I know...but it worked!
Thanks again for your input.

HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
tt2

HT1473 When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.

When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.

I don't use iTunes's "fetch artwork", so I'm not 100% sure, but unless you are signed in to your iTunes account, artwork is not automatic. Even then, iTunes doesn't always find it.
You can copy-and-paste artwork from the inernet, either Amazon or Google. I use 300x300 pixel images.
For the future, if you have iTunes questions, you might be better off posting them in the iTunes for Mac forum, this is iTunes for Windows. In this situation, it doesn't make any difference, but next time maybe it will.

When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

This is typical of the default NEF RAW conversion of Aperture and the best thing you can do is set up a few presets to apply to all of your RAW images to get a tone curve and colors that is pleasing to you as a default. The in camera JPEGs / embedded JPEGs (that you first see during import) are treated to the Nikon "Picture Control" settings that are set on the camera - the RAW's as interpreted by Aperture are not.
I have written extensively and even have a few downloadable presets on my site - look for NEF...
http://photo.rwboyer.com/
RB

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

Camera settings when importing raw

do any camera setting (portrait , landscape,contrast,saturation,etc,) matter when importing raw.

thanks very helpful
if i like one of my custom setting, best thing would be shoot in raw+jpeg, match raw in lightroom to jpeg and save as preset,that way i could save time in prossessing.
and future raw just use preset for prossessing.

When importing photos into iPhoto I get an error Unreadable Files:

When importing photos into iPhoto I get an error Unreadable Files: The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
I can open the JPG in question with PREVIEW, photoshop etc.. actually if I try to import a photo that I had originally imported it also fails..
Please help... Thank you..

I too had this error message (and to be honest, it was becoming a bit of a pain). I resolved it in a slightly different way to Terence.
I had 10 photos that were allegedly unreadable; however, as Terence rightly says, they are duplicates. When I opened iPhoto I mad a note of each of the files concerned and did a Spotlight search throughout my hard drive.
For each photo, there were four or five duplicates. I deleted all but one of each of the photos and then reopened iPhoto. No more error message.
The original problem stemmed from importing my files directly from an external device I was using with a previous computer [that was running XP].
Anyway, hope this helps.
Andy

When importing Raw into A3, in what format is the picture displayed? Jpeg or tiff.

Similar Messages

Maybe you are looking for