When in the UK??????
When can i download iTunes 8 and iPhone software 2.1 in the UK or are we left out in favour of the Americans for a change?????
dude we always get the updates the exact same time as the americans its apps we dont get, and thats the problem them releasing it all at the same time so the whole world starts downloading at the same time and itunes goes into melt down
Similar Messages
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
My iPod touch is stuck on one song in my play list when in the shuffle mode. How do I fix this to shuffle through all the songs in that playlist?
If you go to the Now Playing screen, the Repeat control is the the arrowed racetrack icon on the left side right below the scrubber bar. Tap the icon to change. It is white when Repeat is off.
-
I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?
For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions. -
I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?
I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
Try quitting all apps then try again.
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app -
Error when starting the Integration Repository/Directory
When starting the Integration Repository or Directory I get the following error message when the Java Web Start is launched:
<i>JAR resources in JNLP file are not signed by same certificate</i>
I am running on XI3.0 SP15
Any idea?
Thanks in advance.
Kind regards,
Dave ArendsSolved this issue.
Go to Administration - Java Web Start Administration.
Click on 'Re-initialization and force signings' and start the Repository or Directory again. -
Adobe Photoshop CS4/5 Crashes when using the Move Tool
Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks
Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks. -
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key. -
"Can not get a key" error when assigning the OAuthTokenIssuer certificate
I am migrating from Lync Server 2010 to 2013. When deploying the 2013 server, it fails when assigning the OAuthTokenIssuer certificate. With the KeyException error below.
I've tried "re-keying" the cert and confirmed that the key is exportable. Does anyone have any insight on how to resolve this?
=============
<?xml version="1.0" encoding="UTF-8"?>
-<CsMgmtLog Name="Set-CSCertificate">
<Info Time="2014-04-21 19:00:53Z" Title="Connection">Data Source=servername.domain.com;Initial Catalog=xds;Integrated Security=True</Info>
-<Action Name="Set Certificate" Time="2014-04-21 19:00:53Z">
-<Exception Time="2014-04-21 19:00:54Z" Message="Can not get a key." Type="KeyException">
<StackTrace Time="2014-04-21 19:00:54Z"> at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy) at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext) at Microsoft.Rtc.Management.Internal.KeyManagement.GroupKeyWrapper.Encode(Byte[]
inBytes) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor scope, X509Certificate2 foundCert, X509Certificate2Collection certs, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor
scope, String thumbprint, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Tasks.SetCertificateTask.Action() at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)</StackTrace>
</Exception>
<Complete Time="2014-04-21 19:00:54Z"/>
</Action>
<Error Time="2014-04-21 19:00:54Z" Title="Error">An error occurred: "Microsoft.Incubation.Crypto.GroupKeys.KeyException" "Can not get a key."</Error>
</CsMgmtLog>
=============
Regards,
YaiPlease try to assign the certificate with Lync Server Management Shell.
Run the following command:
Set-CSCertificate -Identity Global -Type OAuthTokenIssuer –Thumbprint <string>.
Check if you can assign default certificate to Lync Front End Server.
Check the Root Certificate Authority certificate is not expired.
Lisa Zheng
TechNet Community Support -
Performance issue when using the same query in a different way
Hello,
I have a performance problem with the statement below when running it with an insert or with execute immediate.
n.b.: This statement could be more optimized, but it is a generated statement.
When I run this statement I get one row back within one second, so there is no performance problem.
select sysdate
,5
,'testje'
,count (1)
,'NL' groupby
from (select 'different (target)' compare_type
,t.id_org_addr id_org_addr -- ID_ORG_ADDR
,t.vpd_country vpd_country -- CTL_COUNTRY
,t.addr_type addr_type -- ADDRESSTYP_COD
from (select *
from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m
on m.vpd_country = t.vpd_country
and m.key_type = 'ORGADDR2'
and m.target_value = t.id_org_addr
where coalesce (t.end_date, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where vpd_country = 'NL' /*EGRB*/
) t
where exists
(select null
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s
where t.id_org_addr = s.id_org_addr)
minus
select 'different (target)' compare_type
,s.id_org_addr id_org_addr -- ID_ORG_ADDR
,s.ctl_country vpd_country -- CTL_COUNTRY
, (select to_number (l.target_value)
from okc_code_foreign l
where l.source_code_type = 'TYS'
and l.target_code_type = 'ADDRLINKTYPE'
and l.source_value = upper (s.addresstyp_cod)
and l.vpd_country = s.ctl_country)
addr_type -- ADDRESSTYP_COD
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s) When I run this statement using a insert by placing
insert into okc_compare_results (
datetime
,compare_tables_id
,compare_target
,record_count
,groupby
) before the statement, then the statement runs about *3 to 4 minutes*, The same is happening when running the select part only using execute immediate.
Below the execution plans of the insert with the select and the select only.
Could somebody tell me what causes the different behavior of the "same" statement and what could I do to avoid this behavior.
The database version is: 11.1.0.7.0
Regards,
Fred.
SQL Statement which produced this data:
select * from table(dbms_xplan.display_cursor ('cuk3uwnxx344q',0 /*3431532430 */))
union all
select * from table(dbms_xplan.display_cursor ('862aq599gfd6n',0/*3531428851 */))
plan_table_output
SQL_ID cuk3uwnxx344q, child number 0
select sysdate ,:"SYS_B_00" ,:"SYS_B_01"
,count (:"SYS_B_02") ,:"SYS_B_03" groupby from ( (select
:"SYS_B_04" compare_type ,t.id_org_addr id_org_addr
-- ID_ORG_ADDR ,t.vpd_country vpd_country --
CTL_COUNTRY ,t.addr_type addr_type -- ADDRESSTYP_COD
from (select * from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m on
m.vpd_country = t.vpd_country ; and
m.key_type = :"SYS_B_05" and
m.target_value = t.id_org_addr ; where
coalesce (t.end_date, to_date (:"SYS_B_06", :"SYS_B_07")) >= sysdate)
/*SGRB*/ where vpd_country = :"SYS_B_08" /*EGRB*/
Plan hash value: 3431532430
Id Operation Name Rows Bytes Cost (%CPU) Time Pstart Pstop
0 SELECT STATEMENT 1772 (100)
1 SORT AGGREGATE 1
2 VIEW 3 1772 (1) 00:00:22
3 MINUS
4 SORT UNIQUE 3 492 1146 (1) 00:00:14
* 5 HASH JOIN OUTER 3 492 1145 (1) 00:00:14
6 NESTED LOOPS
7 NESTED LOOPS 3 408 675 (1) 00:00:09
* 8 HASH JOIN 42 4242 625 (1) 00:00:08
9 PARTITION LIST SINGLE 3375 148K 155 (2) 00:00:02 KEY KEY
* 10 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 3375 148K 155 (2) 00:00:02 KEY KEY
* 11 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
* 12 INDEX UNIQUE SCAN UK_ODS_ORG_ADDR 1 1 (0) 00:00:01
* 13 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_ORG_ADDR 1 35 2 (0) 00:00:01 ROWID ROWID
* 14 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 1354K 469 (1) 00:00:06
15 NESTED LOOPS
16 NESTED LOOPS 1 67 9 (12) 00:00:01
17 NESTED LOOPS 1 48 8 (13) 00:00:01
* 18 HASH JOIN 1 23 6 (17) 00:00:01
* 19 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_COUNTRY_SYSTEM 1 11 2 (0) 00:00:01 ROWID ROWID
* 20 INDEX RANGE SCAN PK_ODS_DIVISION_SYSTEM 1 1 (0) 00:00:01
* 21 TABLE ACCESS FULL SY_SOURCE_CODE 8 96 3 (0) 00:00:01
22 TABLE ACCESS BY INDEX ROWID SY_FOREIGN_CODE 1 25 2 (0) 00:00:01
* 23 INDEX RANGE SCAN PK_SY_FOREIGN_CODE 1 1 (0) 00:00:01
* 24 INDEX UNIQUE SCAN PK_SY_TARGET_CODE 1 0 (0)
* 25 TABLE ACCESS BY INDEX ROWID SY_TARGET_CODE 1 19 1 (0) 00:00:01
26 SORT UNIQUE 3375 332K 626 (1) 00:00:08
* 27 HASH JOIN OUTER 3375 332K 625 (1) 00:00:08
28 PARTITION LIST SINGLE 3375 148K 155 (2) 00:00:02 KEY KEY
* 29 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 3375 148K 155 (2) 00:00:02 KEY KEY
* 30 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
Predicate Information (identified by operation id):
5 - access("M"."TARGET_VALUE"="T"."ID_ORG_ADDR" AND "M"."VPD_COUNTRY"="T"."VPD_COUNTRY")
8 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_12 S."ADR_ID_CEGEDIM" :SYS_B_13 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
10 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_14,:SYS_B_15))>=SYSDATE@!)
11 - access("M"."KEY_TYPE"=:SYS_B_11 AND "M"."VPD_COUNTRY"=:SYS_B_16)
12 - access("T"."ID_ORG_ADDR"="M"."TARGET_VALUE")
13 - filter(("T"."VPD_COUNTRY"=:SYS_B_08 AND COALESCE("T"."END_DATE",TO_DATE(:SYS_B_06,:SYS_B_07))>=SYSDATE@!))
14 - access("M"."KEY_TYPE"=:SYS_B_05 AND "M"."VPD_COUNTRY"=:SYS_B_08)
18 - access("CS"."ID_SYSTEM"="SK"."ID_SOURCE_SYSTEM")
19 - filter("CS"."SYSTEM_TYPE"=1)
20 - access("CS"."VPD_COUNTRY"=:B1 AND "CS"."EXP_IMP_TYPE"='I')
filter("CS"."EXP_IMP_TYPE"='I')
21 - filter("SK"."CODE_TYPE"=:SYS_B_18)
23 - access("FK"."ID_SOURCE_CODE"="SK"."ID_SOURCE_CODE" AND "FK"."SOURCE_VALUE"=UPPER(:B1) AND
"CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY")
filter(("FK"."VPD_COUNTRY"=:B1 AND "FK"."SOURCE_VALUE"=UPPER(:B2) AND "CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY"))
24 - access("FK"."ID_TARGET_CODE"="TK"."ID_TARGET_CODE")
25 - filter("TK"."CODE_TYPE"=:SYS_B_19)
27 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_23 S."ADR_ID_CEGEDIM" :SYS_B_24 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
29 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_25,:SYS_B_26))>=SYSDATE@!)
30 - access("M"."KEY_TYPE"=:SYS_B_22 AND "M"."VPD_COUNTRY"=:SYS_B_27)
SQL_ID 862aq599gfd6n, child number 0
insert into okc_compare_results ( datetime
,compare_tables_id ,compare_target
,record_count ,groupby )
select sysdate ,:"SYS_B_00" ,:"SYS_B_01"
,count (:"SYS_B_02") ,:"SYS_B_03" groupby from ( (select
:"SYS_B_04" compare_type ,t.id_org_addr id_org_addr
-- ID_ORG_ADDR ,t.vpd_country vpd_country --
CTL_COUNTRY ,t.addr_type addr_type -- ADDRESSTYP_COD
from (select * from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m on
m.vpd_country = t.vpd_country ; and
m.key_type = :"SYS_B_05" and
m.target_value = t.id_org_addr
Plan hash value: 3531428851
Id Operation Name Rows Bytes Cost (%CPU) Time Pstart Pstop
0 INSERT STATEMENT 1646 (100)
1 LOAD TABLE CONVENTIONAL
2 SORT AGGREGATE 1
3 VIEW 1 1646 (1) 00:00:20
4 MINUS
5 SORT UNIQUE 1 163
6 NESTED LOOPS OUTER 1 163 1067 (1) 00:00:13
7 NESTED LOOPS 1 135 599 (1) 00:00:08
* 8 HASH JOIN 19 1919 577 (2) 00:00:07
9 PARTITION LIST SINGLE 1535 69075 107 (4) 00:00:02 KEY KEY
* 10 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 1535 69075 107 (4) 00:00:02 KEY KEY
* 11 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
* 12 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_ORG_ADDR 1 34 2 (0) 00:00:01 ROWID ROWID
* 13 INDEX UNIQUE SCAN UK_ODS_ORG_ADDR 25 1 (0) 00:00:01
* 14 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 1 28 468 (1) 00:00:06
15 NESTED LOOPS
16 NESTED LOOPS 1 67 8 (0) 00:00:01
17 NESTED LOOPS 1 48 7 (0) 00:00:01
18 NESTED LOOPS 1 23 5 (0) 00:00:01
* 19 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_COUNTRY_SYSTEM 1 11 2 (0) 00:00:01 ROWID ROWID
* 20 INDEX RANGE SCAN PK_ODS_DIVISION_SYSTEM 1 1 (0) 00:00:01
* 21 TABLE ACCESS FULL SY_SOURCE_CODE 1 12 3 (0) 00:00:01
22 TABLE ACCESS BY INDEX ROWID SY_FOREIGN_CODE 1 25 2 (0) 00:00:01
* 23 INDEX RANGE SCAN PK_SY_FOREIGN_CODE 1 1 (0) 00:00:01
* 24 INDEX UNIQUE SCAN PK_SY_TARGET_CODE 1 0 (0)
* 25 TABLE ACCESS BY INDEX ROWID SY_TARGET_CODE 1 19 1 (0) 00:00:01
26 SORT UNIQUE 1535 151K
* 27 HASH JOIN OUTER 1535 151K 577 (2) 00:00:07
28 PARTITION LIST SINGLE 1535 69075 107 (4) 00:00:02 KEY KEY
* 29 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 1535 69075 107 (4) 00:00:02 KEY KEY
* 30 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
Predicate Information (identified by operation id):
8 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_12 S."ADR_ID_CEGEDIM" :SYS_B_13 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
10 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_14,:SYS_B_15))>=SYSDATE@!)
11 - access("M"."KEY_TYPE"=:SYS_B_11 AND "M"."VPD_COUNTRY"=:SYS_B_16)
12 - filter((COALESCE("T"."END_DATE",TO_DATE(:SYS_B_06,:SYS_B_07))>=SYSDATE@! AND "T"."VPD_COUNTRY"=:SYS_B_08))
13 - access("T"."ID_ORG_ADDR"="M"."TARGET_VALUE")
14 - access("M"."KEY_TYPE"=:SYS_B_05 AND "M"."VPD_COUNTRY"=:SYS_B_08 AND "M"."TARGET_VALUE"="T"."ID_ORG_ADDR")
filter("M"."TARGET_VALUE"="T"."ID_ORG_ADDR")
19 - filter("CS"."SYSTEM_TYPE"=1)
20 - access("CS"."VPD_COUNTRY"=:B1 AND "CS"."EXP_IMP_TYPE"='I')
filter("CS"."EXP_IMP_TYPE"='I')
21 - filter(("SK"."CODE_TYPE"=:SYS_B_18 AND "CS"."ID_SYSTEM"="SK"."ID_SOURCE_SYSTEM"))
23 - access("FK"."ID_SOURCE_CODE"="SK"."ID_SOURCE_CODE" AND "FK"."SOURCE_VALUE"=UPPER(:B1) AND
"CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY")
filter(("FK"."VPD_COUNTRY"=:B1 AND "FK"."SOURCE_VALUE"=UPPER(:B2) AND "CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY"))
24 - access("FK"."ID_TARGET_CODE"="TK"."ID_TARGET_CODE")
25 - filter("TK"."CODE_TYPE"=:SYS_B_19)
27 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_23 S."ADR_ID_CEGEDIM" :SYS_B_24 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
29 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_25,:SYS_B_26))>=SYSDATE@!)
30 - access("M"."KEY_TYPE"=:SYS_B_22 AND "M"."VPD_COUNTRY"=:SYS_B_27)Edited by: BluShadow on 20-Jun-2012 10:30
added {noformat}{noformat} tags for readability. Please read {message:id=9360002} and learn to do this yourself.yes, all the used tables are analyzed.
Thanks, for pointing to the metalink bug, I have also searched in metalink, but didn't find this bug.
I have a little bit more information about the problem.
I use the following select (now in a readable format)
select count (1)
from ( (select 'different (target)' compare_type
,t.id_org_addr id_org_addr -- ID_ORG_ADDR
,t.vpd_country vpd_country -- CTL_COUNTRY
,t.addr_type addr_type -- ADDRESSTYP_COD
from (select *
from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m
on m.vpd_country = t.vpd_country
and m.key_type = 'ORGADDR2'
and m.target_value = t.id_org_addr
where coalesce (t.end_date, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where vpd_country = 'NL' /*EGRB*/
) t
where exists
(select null
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s
where t.id_org_addr = s.id_org_addr)
minus
select 'different (target)' compare_type
,s.id_org_addr id_org_addr -- ID_ORG_ADDR
,s.ctl_country vpd_country -- CTL_COUNTRY
, (select to_number (l.target_value)
from okc_code_foreign l
where l.source_code_type = 'TYS'
and l.target_code_type = 'ADDRLINKTYPE'
and l.source_value = upper (s.addresstyp_cod)
and l.vpd_country = s.ctl_country)
addr_type -- ADDRESSTYP_COD
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s)) The select is executed in 813 msecs
When I execute the same select using execute immediate like:
declare
ln_count number;
begin
execute immediate q'[<select statement>]' into ln_count;
end;This takes 3:56 minutes to complete.
When I change the second coalesce part (the one within the exists) in the flowing way:
the part
coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate
is replaced by
s.end_val_dat >= sysdate or s.end_val_dat is nullthen the execution time is even faster (560 msecs) in both, the plain select and the select using the execute immediate. -
Print program is not getting triggered when saving the application
Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
UmeshHi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar -
SSO not working when launching the InfoView application
We are so close to implementing SSO for BO Edge 3.0 using AD and Kerberos. We can logon to InfoView and CMC using AD authenication and it works fine. When turning on SSO:
<context-param>
<param-name>sso.enabled</param-name>
<param-value>true</param-value>
</context-param>
in the InfoViewApp web.xml it fails with an error message in the Tomcat stdout.log
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
+ [Krb5LoginModule] user entered username: "at"MYCOMPANY.COM+
User name is missing.
When done through the application logon screen and able to logon it is
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
+ [Krb5LoginModule] user entered username: dennis"at"MYCOMPANY.COM+
The username appears in the log file followed by the debug message for Kerberos key being created.
I am so close, does anyone have an idea?Hi Tim,
The Vintela SSO document for BOE XI 3.1 is very comprehensive, but it has not resolved my issue.
Under NTLM option I SSO works great with .NET InfoView as long as I have the web site authentication set to Windows Authentication and ASP .NET Authentication enabled. Once the ASP .NET is disabled, SSO does not work.
When using the Kerberos option, .NET InfoView SSO does not work due to the error 'propagating the security context between the security server and the client'.
The Java InfoView SSO does not work either, but I can enter my user credentials and logon fine.
std.out error:
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
[Krb5LoginModule] user entered username: @OR.PROVIDENCE.ORG
Acquire TGT using AS Exchange
[Krb5LoginModule] authentication failed
Generic error (description in e-text) (60)
No user name is being passed. I've been through a multitude of documents and forums ensuring settings are correct and I believe they are including no duplicate SPN's.
The only issue on the server is that I cannot open the tomcat confi app. due to it not able to start service BOE120Tomcat. I was able to update the registry with the info for the bsclogin.config and krb5.ini. I was not able to find anything on getting that service started.
Any ideas? Need more info? I have a bunch.
Thanks and have fun,
Phil -
I want to watch an iTunes rental video on my MacBook Pro but AirPlay the audio to my AirPort Express linked speakers. However the AirPlay icon isn't available when arching the rental video in iTunes. Is there another way? Do I need to but an AppleTV? I don't own a TV, hence why I want to watch on my MacBook Pro.
Welcome to the Apple Community.
With or without an Apple TV you can't send video to one device and audio to another using AirPlay.
Maybe you are looking for
-
Is it possible to recreate Office 2010 FTAs if publishing only shortcuts in App-V 5 SP2?
Greetings, I am trying to sequence only shortcuts for locally installed office 2010 to be used in connection groups with combinations of add-ins utilizing user targeting. Package with shortcuts work fine, however when I try to add file type associati
-
HTTP 500 Error while using XML HTTP Port for idoc
Hi, I am trying to send CRM idocs via XML Http instead of usual t-rfc. After standard idoc - pi configs i get the below error. transferring the IDoc by HTTP, the return code with the message '500Error during parsing of SOAP header' has occurred. In B
-
Can't retrieve approval status in Globally Reusable Workflow (Approval - Sharepoint 2010)
For day's i am trying to implement the following in one of the standard, out of the box, Globally Reusable Workflow with Sharepoint Designer 2010: If Current Item:Approval Status not equals 0:#Approved Start Approval Workflow Task process on Current
-
Export from FCP V5 appears low resolution or unrendered
I have a number of Macs that my business uses FCP 5 for video editing DV-PAL. Whenever we export into any format the graphics we greate of photo's we have imported look low res or unrendered (although we have rendered the movies out). We have tried d
-
Selection without leading zeros in query
Hi Gurus In report, we have defined variable for item no. Is it possible to change the selection for a defined variable (item no.) not to require the leading zeros. Ex u2013 Instead of entering 000000123 , user enters only 123. Its very difficult to