When in try to dawnloded this sign is cming out itunes has detected an iphone in recvery mode. you must restore this iphone before it can be use with itunes
when I wanted to downloaded the new software the phone went of and in my computer saying iTunes has detected an iPhone in recovery mode. you must restore this iPhone before it can be used with iTunes,
my hone is off pls help i need to make calls as i use my phone for work ,
Many Thanks
kerry
So do what it says and restore the phone. Nothing else you can do.
Similar Messages
-
when i pluged my ipod classic 5g to PC then it shows “iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes”?then after restoring the PIOD when IPod restarted then Itunes again detect the same ERROR.
If you are using XP, and you went through the procedure at the bottom of the previously linked document to change the iPod's assigned drive letter, and you also tried putting it into Disk Mode...
If you have not already, try shutting down your computer and disconnecting all USB devices, including hub. Start up with only standard keyboard and mouse connected. Just to be safe, put the iPod into Disk Mode again
http://support.apple.com/kb/HT1363
Run iTunes. Connect iPod to a direct USB port on computer. iTunes may prompt you about "recovery" and ask you to do a Restore. Try to do a Restore again. -
Error message on ipad when we tried to download images to computer. 'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes. It downloaded some images prior to this message and we selected skip any files with errors.
Ipad now just showing apple image with power cord. Don't want to click restore and lose all data.Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766 -
I was updating my Ipads software when it just shut off. I turned on the i pad and it gave me this picture of the wire plugging in to itunes. i plugged it into i tunes and i got this message on itunes saying itunes has detected an ipad in recovery mode. you must restore this i pad before it can be used with i tunes. pleasssse help
iOS Recovery Mode -
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808 -
Ipod nano 2nd generation: I cant restore, says, itunes has detected an ipod in recovery mode, you must restore this ipod before it can be used with itunes
What do you mean you can't restore? It's asking you to restore...
B-rock -
I got the error message above when connecting my old 1st generation ipod to my new PC. My Mac laptop was stolen in a break in at my home, and I no longer have my music files stored anywhere else but this ipod. i don't want to restore it if this process will wipe all my music away. This might be a dumb question, but I am not very savvy with technology. how should i proceed?
If you proceed you will lose all of your music. You weren't using Time Machine on your laptop?
-
ok, so i finally found my ipod. I pick it up and it asks me if i would like to download the latest ios6 software so i did. Then moments later it died, ran out of battery. So i pluged it into my computer via apple usb cord. Then this is what itunes says "iTunes has detected an iPod in recovery mode.You must restore this iPod before it can be used with iTunes". All i want is to get my notes from the utilites section there so important to
If i restore it will my notes still be there, i dont want to restore original settings or something like that .
please help me what do i do?You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
I reboot the computer, deleted and restart itunes, change computer, change cable, check ping, check connection. need help
Step by step
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad -
iTunes gives me the message that it has detected an iPod in recovery mode and that I need to restore the factory settings. When I click the "restore" button iTunes downloads the software. This is a 30 minute process. Once the download completes, I get the same message "iTunes detects an iPod in recovery mode....". I'm running Windows Vista and ZoneAlarm security software.
I've tried this restore function multiple times and still get the same results.
I've also tried resetting the iPod by holding the wake/sleep button and the Home button at the same time. The iPod turns on but shows the icons of a usb cable connecting to iTunes.
Any help would be greatly appreciated.This maybe yuor problem:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!
Turn off your firewall and antivirus software.
-
What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.
-
I try to update IOS 6 to my ipad 2/ wf/3g and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!
Click restore in itunes.
-
When performing the new iPhone(IOS6) update I received an error message - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. Will I lose everything if it goes back to factory settings. Right now my phone wont do anything. It is just showing a cable, an arrow and the iTunes logo.
If you restore from backup.
You should have made sure that everything was on your computer bef ore updating anyway. Did you fail to do that?
All pics taken with iphone should be imported to your computer regularly as you would with any digital camera, most especially before any update/restore/etc. Did you fail to do that? -
Am trying to sync my 3gs to itunes,keeps coming up with a notice saying! iphone in recovery mode. Must restore the iphone before it can be used with itunes.
Am really worried about doing this as the phone came with a note enclosed saying "Do NOT restore or update iphone software on itunes when asked to otherwise unlock will be lost"
Is it safe for me to restore or will it block my phone?
Can anybody help me please?Sounds like you purchased a phone that was hacked to run on a network other than the one it was originally locked to.
Where, exactly did you get this phone? If it's already in a state where it says it must be restored, you don't have a choice. If the phone was hacked, it will be re-locked to the network it was originally locked to. ONLY the carrier it is locked to can legitimately authorize unlocking the phone.
Maybe you are looking for
-
Firefox not responding and crashes when my netbook goes into sleep mode why is that
when i shut the lid on my net book and come back nand open it , put password in and when i click the firefox icon to go back to where i was at it says firefox is not rewsponding or firefox has crashed , why is that
-
I have an iPod mini 1st gen 4gb. When I click the wheel to advance to the next song nothing happens. The wheel works fine otherwise. I have reset and restored the iPod several times. What am I not doing?
-
[FacebookAuthorize("email", "user_photos") issue
As was discussed in another forum, the [FacebookAuthorize("email", "user_photos") in the facebook app template produces the error : Newtonsoft.Json.JsonReaderException: Could not convert string to integer: installed. Path 'data[0].permission', line 1
-
Iv'e just ordered some RJ48(10p10c) plugs to modify a CA-159 cable to fit my CK-7w advanced charging port to give me a micro USB charging lead rather than the 2.0mm plug. Can anyone tell me which contacts in the RJ48 I should put the blue and green w
-
Can Identity Firewall work with L2L IPSec
Hello, One of my customers has requested a L2L IPSec tunnel between a 3rd party ASA5505 and their central office 5510. The tunnel works fine but they have asked to enable Identity Firewall against the incoming connections in relation to the IPSec tun