When in Windows 7 environment I can see and access my mac drive and identities.
Greetings, I am running Mac OS and Windows on MBA. When in Windows 7 environment I can see my mac drive and identities and access the data on them without any security password etc. Can this be avoided, I don't want access/unsecurely access Mac drive.
Hi,
Please check the following settings:
1. In windows 7, try
Secpol.msc in start box and open Local security policy.
2. Expand "Local Policies" and select "Security Options"
3. Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
4. Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
5. Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
6. Change the setting from "require 128 bit" to unchecked (No Minimum)
7. Click OK, and exit.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select your OS X disk.
5. Click on the arrow button below the icon. -
When using Facetime.. the other person can see and hear me, but I can't hear or see them.. Does anyone have any solutions?? The only thing I can see is a still picture of them
Hi mduggan,
Thanks for visiting Apple Support Communities.
If the other person can't see you during a FaceTime call, first use the Camera app on the iPhone to make sure the camera is working properly. If you don't see an image when using the Camera app, try these troubleshooting steps first:
If the screen shows a closed lens or black image, force quit the Camera app.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps and more information here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If the camera is working normally, next troubleshoot FaceTime using the steps in this article:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
All the best,
Jeremy -
When using facetime the other party can see us but not hear us
When trying to use Facetime, we can see and hear the other people, but they can only see us. Any suggestions or settings for us to check?
Learn sign language?
Or
Probably the first thing you want to do is close face time, then doulbe tap the home button to see the task bar... Touch and hold any of those icons until they jiggle, then close them all off by touching the minus sign. Then reboot the pad by holding the sleep and home buttons until the apple logo appears. Ignore the red slider.
Sometimes this reset fixes bugs.
Then, confirm your mike is working. Open any app that records things, and see if it hears you. There have been some discussions about broken mikes.
Then try it again. -
How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.
Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though. -
When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!
I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension. -
When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?
Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data. -
I want to upload documents from my pc (windows vista) to the cloud so I can see and edit them on my iPad 3. How do I do this?
I have the cloud on my pc and I've moved documents to it, but they don't update when I update the one on my pc.
And I don't know how to get them on my iPad. I have the new ios7, btw. Just got it but couldn't find my documents with ios6
ThanksYou can upload files to Dropbox and edit them with Quickoffice Pro HD.
http://i1224.photobucket.com/albums/ee374/Diavonex/aed9d078ffa732f02b48eebd3b723 95d_zpsa0036f7b.jpg -
I have searched quite a bit to find a resolution to this problem, with no success. Any help would be appreciated.
I decided to rebuild my inboxes by following this advice: http://support.apple.com/kb/PH11704. The rebuild took several hours and at 96% (4 minutes remaining apparently), the indexing froze (that is, after 8 hours, the message was still telling me "4 minutes left"). I forced quit mail, restored the previous Envelope files from the trash, and everything seemed fine.
However, since this failed attempt, I can see and select the message in the center pane and when I click on it to display, I get "Loading" text, but nothing comes up. All messages in my various inboxes have the reloading problem, EXCEPT messages that I downloaded since the aborted rebuild (in other words, there are about 40 messages that I downloaded since I tried the rebuild and I have no problem with these). The other 70,000 messages however wont load, even though I can see them in the centre pane and spotlight has no problem finding them and showing me their contents (when I hover the mouse over the message). When I click on the message in spotlight, mail opens and the loading problem re-occurs.
Since then, based on various suggestions I found for similar issues, I have used Disk Utility to verify and repair permissions and the drive. I used Onix to rebuild the Mail index (that only took about a minute - I am not sure how to interpret this when compared to the hours the rebuild took with Mail). No joy, I still have the same problem. I even restored one of my inboxes via Time Machine and the same issue with loading continues.
I am using ML 10.8.2. I have a combination of IMAP accounts (work) and POP accounts (personal). The issue of loading occurs irrespective of the account.
I am baffled and am now considering migrating to either Thunderbird or Postbox 3 to try and solve my problem. I prefer to stay with Mail. I should note also that I am using MailTags with Mail (http://www.indev.ca/MailTags.html), although I have not used any of the features. I upgraded to ML from SL about 2 weeks ago. It was very smooth and there appear to be no issues (not sure how helpful this is and probably not at all related to this issue).
Any suggestions much appreciated!Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126 -
When I create a photo stream in ios6, everyone who is logged in to my iCloud account can see and edit my stream (on their iPhones only). Not just the email addressees that I sent the photo stream link to. Is that how photo stream security is meant to work? Is so it means my whole family can see any photo stream I set up. Hence no security? Can't share the pics with the wife then :(
The whole idea to an icloud account is that one user uses it and has all their devices synced together. Different users need different Apple IDs to create their own icloud accounts. Note that everyone can still use the same ID for an iTunes account (to share purchases).
To create a new icloud account, go to
http://www.apple.com/icloud/setup/ -
Hi, I have got three ipad minis which I would like to use in a business environment whereby the users can see and update a single calender. Is this possible? Would they have to be run form one account?
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.
Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved. -
i installed facetime for my mac and now when i make a call it goes through i can see and hear them perfectly but they cannot, i am "frozen" so how do i fix this?
When I try to make a call it will go through and I can hear the other person but they cannot hear me, is there a setting that disables the speaker when using the headphones to try to make a call, also speakerphone automatically goes on when I start a call which I do not like, any suggestions how to fix this?
I also have this problem........... -
My new iphone 5s doesn't have any volume when I call someone. I can see from the screen that it is calling them, but I cannot hear anything. Also when they answer my call, I cannot hear them.
Turn the volume up... in call volume and sounds (ring, notifications, etc) are seperate volume controls.
-
When i start the PBook i can see a faded display...
Pls Help... When i was working with my PBook...the screen gets faded...now when i start the PBook i can see a faded display...i dont know whether i pressed any shortcut..i am new guy to work with this.....pls give a solution
G4 POWERBOOK Mac OS X (10.3.1)pbook are having issues in this area. try these steps.
maybe its time to consider doing a mass complaint. If doesnt work get a class action or tort lawyers.
reset pmu- just follow the link for info. http://search.info.apple.com/?search=Go&lr=lang_en&kword=&type=&q=pmu%20reset%20 and%20powerbook%20g4
next test the battery( i heard bad battery can affect brightness, the genius at apple store not all genius), next is video card, next is invertor(which you can find for about $50 and not the rip $1000 from apple on aftermarket sites or ebay)
also try display caliberation in system preferenc/display
Maybe you are looking for
-
I don't have any music on iPhone 5
Can anyone help or suggest advise - I have an iPhone 5 and I've setup iTunes Match on my phone. But I dont seem to have any music on my phone. Whenever I go to the music app I just get a blank screen and the outline of the cloud icon. After a few sec
-
Adobe Audition CS5.5 with Premiere Pro CS5
Hello everybody. I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5 But quite frankly it's just because of one application. Though, i am in doubt if i'll actually going to make the downgrade. And as you could an
-
Adobe - what am I doing wrong?
Sorry if this has been covered elsewhere...can't find an answer... I needed to view certain docs on the internet requiring Adobe, so I downloaded it off the site, reader installed properly, appears in my Applications, but does not respond and never o
-
How do you fill in drawn lines in Fireworks?
Hi! I'm very new to this so sorry if I'm asking a very obvious question. I have drawn lines in Fireworks and I now want to fill the lines with colour. I've tried grouping the lines and I've tried Modify - Combine Paths - Join I've attached the file.
-
I need to write a program that displays the Word count, sentence length, and average word length in a program, stopping input when the user presses enter. This is my code: * @(#)sentence stats.java * sentence stats application * @author * @version 1.