When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
https://discussions.apple.com/thread/5831093

Similar Messages

  • After updating to iTunes 12  the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

    After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
    I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
    I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

    Found a possible solution for me.
    While the phone was plugged into my computer and iTunes is CLOSED.
    1. I went to Services in Windows.
    2. I selected Apple Mobile Device and right clicked and selected "Stop".
    3. Then I right-clicked again and selected "Start".
    4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall".  You will get a warning about uninstalling the device.  Click OK.
    5.  At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
    This re-installed the iPhone and everything started working again.

  • HT204095 Apple Mobile Device USB Driver will not install

    I've followed the steps to stop and restart Apple Mobile Device Service.  I've deleted 3rd party software I thought would conflict.  I uninstalled/reinstalled ITunes several times, but it will not recognize my iPod.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The section Install missing components may help if a particular component will not install when using the main iTunes setup program.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

    When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services".  I don't know what this means and I do not know how to resolve it.  Can you advise please?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open

  • I have an eight GB iPhone 3G, but when on iTunes on my Mac, it says my phone only has 6.9 GB of space total. I just want to know why this is, and if I am able to get a new phone because of malfunction.

    I have an eight (8) GB iPhone 3G, but when on iTunes on my Mac, it says my phone only has 6.9 GB of space total. I just want to know why this is, and if I am able to get a new phone because of malfunction.  Thanks!

    You don't have a malfunction.  Read this:  How Mac OS X and iOS report storage capacity, http://support.apple.com/kb/TS2419

  • ITunes says computer not authorized. When I try to authorize computer it says it is already authorized but will not play song

    iTunes says computer not authorized. When I try to authorize computer it says it is already authorized but will not play song. Note. Library was moved from PC to MAC. I am signed in to Itunes with the Apple ID created on the old computer which is different than the Apple ID used to set up the MAC.

    I'm experiencing the same thing under iTunes 11.1.1:
    iTunes says the computer is not authorized, prompts me to authorize
    I enter my credentials, iTunes says computer is already authorized
    When I attempt to play song, iTunes starts at bullet point 1 above over again.
    My attempted fixes:
    I tried everything in this support document, to no avail: http://support.apple.com/kb/TS1389 (Note: I cannot find a SC Info folder on my Mac)
    Deauthorize and then reauthorize computer
    Delete song and try to redownload from iTunes store - there's only a button that says 'purchased' with no option to redownload it
    Note: I am using only one iTunes account, and I double checked the song info - I'm authorizing the correct account - 12 songs from the same album purchased at the same time play fine. As does the song in question - from the finder. Only iTunes stubbornly refuses to play it.
    The most odd thing is that iTunes music is DRM free - the song in question was purchased only a few months ago. Thus there's no need to authorize the computer to play it.
    I was hoping that iTunes 11.1.1 would cure it - no dice.

  • My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing

    I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???

    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Firefox when closing in win7 64 bit keeps a pid going and when I try to reopen firefios it says it is still running and will not open in English

    firefox when closing in win7 64 bit keeps a pid going and when I try to reopen firefios it says it is still running and will not open in English, so i have to go to the
    task manager and find firefox 32* and kill it then firefox will reopen when asked too

    firefox when closing in win7 64 bit keeps a pid going and when I try to reopen firefios it says it is still running and will not open in English, so i have to go to the
    task manager and find firefox 32* and kill it then firefox will reopen when asked too

  • When trying to install iTunes 8.2.1, I get a Mobile Device Support error

    When I run the iTunes 8.2.1 Installer, everything works fine until it starts the actual install process, when it prints out the error "run preupgrade script for Apple Mobile Device Support. Contact the software manufacturer for assistance." I have some experience with Macs, but this is new for me.
    Also, i tried downloading iTunes straight from the website, but I still get the error message.
    Please help I got a new iTouch and it wont sync unless i upgrade i need help!!!

    Hello there,
    I'm experiencing the same problem with the latest upgrade of itunes 9.0.1.
    It starts the installation process and then i get this "failed installation" message
    "run preupgrade script for apple mobile device support"
    Have you been able to solve the problem? And if so how did you?
    thanks,
    M

  • IPod touch 5th gen will not connect to iTunes, also apple mobile device usb driver does not appear in device manager. PLEASE HELP.

    I recently purchased my iPod touch with no issues. After updating to iOS 8.1.1 I found that my iPod would no longer appear in the latest version of iTunes and when I searched for Apple Mobile Device usb driver in the device manager, it was nowhere to be found. I've already uninstalled and re-installed ALL components of iTunes and read every single help article. I've tried everything. What went wrong?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • When updating Itunes I keep getting an error messge mobile device failed to start check for sufficient privileges

    I need help upgrading Itunes.I keep getting an error message that says
    Mobile device failed to start check for sufficient privileges.I am running windows 8

    Same here - did the latest iTunes update and boy am I glad I did that; haven't been able to run iTunes since. Have re-installed after uninstalling as per one of the other help pages, re-booting, and now instead of getting the above error message I get one that says Apple Application support not found. Please uninstall then reinstall. Apple error 2.
    Not thanks - Apple, you might want to do something about this I'm guessing since I'm no longer able to use iTunes thanks to your update?

  • Avoid installing iTunes 11 if you are a Windows user. Calendars, etc will not sync with iPhone or iPad. Anyone have a fix?

    After installing iTunes 11.0, Outlook Calendars, etc will not sync with iPhone or iPad. Anyone have a fix?

    I'm also seeing weird sync issues since upgrading to iOS 7.  The sync issues started when I first upgraded to iOS 7 so I suspect that iOS 7 is to blame and the other system differences aren't an issue (i.e. I also upgraded to Windows 8.1 but it never worked properly when I was on Windows 8).  For me, the only way to "sync" all the smart playlists and music is to restore from backup and then the first sync seems to work.  However, I haven't tried that recently (I tried it a month back or so and it worked then) because it is ridiculous to have to restore your phone just to sync things!  Apple needs to fix the iOS 7 quality issues.

  • Windows 7 is reporting that apple mobile device usb driver is not installed correctly using iphone 4

    Problem when syncing iphone 4 under window 7 error message suggest that uSB driver is not installed correctly Error 52. Any ideas!

    I had similar problems and found a useful site.  My iPhone 4s and iPad weren't found by iTunes.  Tried the suggestions below and my problem was fixed.
    http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
    Hope this helps!

  • When installing iTunes 11 i get error of appel mobile

    I have windows 8.1 when i install new version of iTunes
    get masege appel mobile

    see my post on steps to take to fix this problem

Maybe you are looking for

  • Difference between business activity and service process in transaction

    Hi Friends, Can anyone explain me  the difference between business activity and service process in transaction category of service desk Thanks & regards, Shanmugam Balamurugan

  • Maximum number of items on a page?

    Hi, Does the number of items on a page have a maximum? (portal 904) I want to place about 14,000 images (30-50k each) on a page, using WEBDAV. An alternative would be placing the items on the filesystem of the midtier, but that way I would have no ad

  • ITunes App Store Web Service available?

    Hi there, appshopper.com has great lists and rankings about iPhone apps in the App Store. Does anybody happen to know which interface the folks at appshopper use? I am not aware of any official interface (and I don't believe, they do it all manually.

  • Master-detail relationship - passing parameter from form to form

    Hello. I have a question about master detail relationship. In first form we have master-detail relationship. Example on dept, emp tables: We query dept (master), so we can get one or many emp (detail) records. Then we have a third table - tasks. Task

  • Ejb-jar.xml gets corrupted..at the time of deployment

    Hi, I'm Implemnting an application for Ejb's in WebDynpro. I'm conncting my database table in java dictionary to Webdynpro Interface using EJB. I have used the follwing link... Link: Consuming EJBs in web dynpro Using java dictionary But i'm facing 2