When install QuickTime7.7.1 and QT SDK's interface(OpenMovieFile method) open file failed

Hi guys.
I use QT SDK to write a sample to load movie files.
when install QuickTime7.7.1 and call QT SDK's interface(OpenMovieFile method) to open file, it doesn't work. i will get error(-36). but when i use QT 7.6.9, it works well.
so how can i use QT SDK(install QT7.7.1 and OS is windows xp) to open movie file which fullpath include wide unicode characters(like D:\Media動画).
much appreciate.

This forum is for questions about the Communities themselves. You'll be more likely to get a quick and helpful answer if you post in the forum dedicated for your product. The QuickTime forum can be found here:
QuickTime
Regards.

Similar Messages

Getting error code 150110 when installing Reader on Win7 and there is plenty of disk space. Help!

getting error code 150110 when installing Reader on Win7 and there is plenty of disk space. Help!

Hi pat27,
Are you still facing this issue?
Do you have any previous version of Reader installed, if yes and it is 9 or above. Uninstall that using Adobe Reader cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html
Once that is uninstalled restart your machine and try install again.
Also you may try to create a new user profile with Admin rights and try to install again.
- How to create new user profile:: Fix a corrupted user profile - Windows Help
Regards,
Ajlan Huda

GPS not working in IOS6 when installed on iPhone 3GS and iPhone 4?

Can somebody confirm that GPS location data (not from cell or wifi) is no longer functioning in IOS6 when installed on iPhone 3GS and iPhone 4?

I have the same issue exept my phone doesn't ring for incoming calls. I've tried every fix, restored the phone and spent over an hour on the phone with Apple Care doing a second restore. The supervisor told me that he hadn't heard of the issue at all and came to the conclusion that I'd somehow broken the silent switch and that I'd have to pay $150 to have it repaired, despite my insistance that it was obviously a software issue since the problem started immediately after I updated to iOS 6. Total BS. I want this issue resolved immediately considering that the phone is virtually useless to me if I have to carry it around and continually check for notifications and incoming texts, phone calls, etc.

HT1597 How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers po

How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers podcasts as the last step, and at other times randomly, when trying to just add some MP3's to a playlist, for example. I can't seem to find any other option to uncheck, and can't find an answer from my so-far internet searching.

erict, you blew me away with that suggestion! It was something so simple I couldnt believe I hadnt thought of it! But in the end it didn't work, which I was really surprised about. On Windows anytime anything was moved itunes was hoplessly lost, but on this mac it still kept up with everything. I tried renaming folders, moving folders, and even renaming moved folders but it still kept trying to import.
I even went as far as deleting EVERYTHING i had moved to the Mac, which didnt really work. It still kept trying to import what wasnt there which made it continue to freeze up. However, after doing this it, the freezing was not nearly as bad. It gave me enough of a break to cancel it through the itunes dialog box at the top of the app. So in the end, thats all I really needed to do, only before I had deleted everything the freezing would not allow me to do it.
So now Im reimporting everything again, only slowly, and only a few Artists at a time.

I have a third party app installed on iphone 4s and ipad 2 gen the app is different file size say 1.1mb on ipad vs 888kb on ipad any idea?

I have a third party app installed on iphone 4s and ipad 2 gen the app is different file size say 1.1mb on ipad vs 888kb on ipad any idea?

its possible that since the ipad version of the app is the version made for ipad and the one for phone is made for phone that they could be different sizes because they are programmed differently. Also possible that since they are this way one may have had more updates to it than the other so it may have more added data to the app than the other one

How do you install Camera Raw 8.3 to CS5 photoshop so I can open files ?

How do you install Camera Raw 8.3 to CS5 photoshop so I can open files? Thanks

CS5 does not support ACR 8.5, it only goes as far as 6.7.
You will need to convert your raw files to DNG format with the free converter. http://helpx.adobe.com/photoshop/digital-negative.html

I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

What file format(s) are the "links"?
If raster images, do they contain clipping paths or transparency?
What is your platform and OS?
Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
Can you reproduce the problem with a newly created document and the same linked images?
There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

Flex Builder 3 Beta 2 Expires early when using Flex 2 key, and new SDK

I was told to use my Flex 2 key to extend the Beta period for
Flex Builder 3, this worked, today it said I have 99 days left.
but When I installed the latest SDK and restarted Flex
Builder 3 Beta 2, it says it expires in 15 days.
If I put the original SDK back and restart it goes back to 99
days, so If I switch the SDKs while Eclipse is already loaded it
seems to stay at 99 days, so now before I start Eclipse I have to
move the orig SDK back, start Eclipse, then switch SDKs.
This does not make much sense to me, why does the SDK affect
the Builder Beta Period at all? is there a fix for this, I have a
project due but 31st, and I would be screwed if it dies before
then, I already have flex 2 but I cannot roll back as this project
relies on Flex Builder 3 Functionality.

I the probelm we are stating is that we DID enter our flex 2
key and it DID initially set the expire date out, but I needed to
use a later SDK and thats when the problem occured. without the
latest the ImageSnapshot.captureImage does not work at all for me,
so must use a later SDK. However this morning my Eclipse started
stating 96 days remaining and I am still using the latest SDK, so
no idea why it works sometimes and not others.

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Adobe Flash crash when I try to upload some photos to create an album on Facebook . I think this issue related to the new version of Mozilla Firefox that I had installed 3 days ago and cause my system not able to open the internet . But I have sent a rep

Adobe flash crash when I try to upload photos to created album on Facebook . Is this related to the new version of Mozilla Firefox that I installed few days ago.
== This happened ==
Not sure how often
== This morning July 18th 2010

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

Issues when installing SAP IK FP1 and FP2

Hi all,
has anybody installed the SAP IK 3.0 FP1 and FP2? If so, after installing it, were you able to load the cmc page and infoview page in internet explorer.
I get an error when typying the url:
Estado HTTP 404 - /PartnerPlatformService/service/app/logon.do
type Informe de estado
message /PartnerPlatformService/service/app/logon.do
description The requires resource (/PartnerPlatformService/service/app/logon.do) is not available
Apache Tomcat/5.5.20
seems like the deploy of the applications did not run properly.
I have done it a couple of times and the same error.
Anyone has any idea?
Thanks a lot

Hi Luis,
first a couple of things that you must take into account.
- I have installed the FP1 and FP2 just to see if I could an issue with the SAP IK. After doing that I realized that some things got
solved but other did not. So I uninstalled the FP.
- If you just need to install the FP to solve a different issue, you can try by leaving the service name blank (I have not tested that) or
if you fill that information, you can redeploy manually the PartnersPlaformService from tomcat. That way it works
I hope this helps
Regards

Just got CC - my Creative Cloud app pauses when installing Photoshop or Illustrator and other apps. Help! :)

I've been on 41% for a few hours now.. ?

HI justchaddles,
At 41%, Creative Cloud Desktop application tries to extract the downloaded component. Have we checked if there is any active antivirus running in the back ground that might be stopping it?? Try a new user account as well if the first step doesnt work.
Cheers,
Kartikay Sharma

I cannot open images from my new NikonD3300 in Elements 11 , I have downloaded and installed CameraRaw 8.4 and DNG convertor but still won't open!

I wonder if anyone can help with the above question about Elements 11 and my not being able to open Raw images, I have tried downloading and installing Cmaera raw 8.4 and DNG convertor but still not opening have not had truoble with D200 or lumix G5. thanks Yvonne

The D3300 requires Camera Raw 8.4 but Camera Raw 8.4 is only compatible with Elements 12 and later.
Camera Raw-compatible Adobe applications
Camera Raw 8.4 is not compatible with Elements 11 and never will be.
You'll have to either a) upgrade to Elements 12, or b) use the DNG converter to convert all D3300 Raw files to DNGs then edit the DNGs in Elements 11.
Camera Raw plug-in | Supported cameras
The D200 requires Camera Raw 3.3 (or later) and the Lumix G5 requires Camera Raw 7.2 (or later) both of which are compatible with Elements 11.

Final cut version 10.0.6 crashes every time I put my hard drive in... when it's already in and I click on final cut, it opens for a few seconds, then 'quits unexpectedly'

Someone please help me, trying to edit a project for college and I literally can't. I don't understand why it's not working, I've been on utilities and checked the hard drive and there's nothing wrong with it and I've made sure there is enough space on the drive.

Have you tried trashing the preferences?
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

I've installed Adobe Reader twice and it still will not read a PDF file. What's up?

I've installed Adober Reader twice now and it still will not read a PDF. What's up?

I have the same problem. Adobe Reader worked fine until the last few days. I run Windows 7 and all I get is a small black cross in the top left corner of the screen. I can open downloaded pdf files, but not anything new from the internet.
I uninstalled and reinstalled the program and have run every type of scan I know of without any change.
This seems to be a common and recent problem, so I would like to know what's being done about it.

When install QuickTime7.7.1 and QT SDK's interface(OpenMovieFile method) open file failed

Similar Messages

Maybe you are looking for