When installed, LR CC will not start.

I just upgraded LR5.7 to LR CC, but when installed, LR CC will not start. No error messages, no hour glass thinking. Nothing. It's just dead. I'm using Windows7. Any one else had the same problem?

That file is part of the Microsoft Visual Studio distributable package that is available from this link:
Download Visual C++ Redistributable for Visual Studio 2012 Update 4 from Official Microsoft Download Center

Similar Messages

  • ITunes is installed but it will not start

    I just updated iTunes and the progam shows as being installed but iTunes will not start.

    I have had this problem - started two days ago. (Win 7 Enterprise 64-bit OS.) I have not added anything new recently that could cause a conflict (upgrades, new software, etc). Suddenly it didn't work - will not open. In Windows Task Manager I can see that it starts and then stops without opening. I've plugged in my IPhone, IPad and IPod and nothing will connect. Some forum threads suggest removing/reinstalling QuickTime and some have found that to work. Didn't for me. It will open if "Run as Administrator" is used, but that - according to threads - suggests third-party add ons as a problem. Not the case with mine. I completely removed all of the ITunes software (Bonjour, Mobile Support, etc.) and reinstalled. Nothing changed. I am so frustrated with Apple on this - I found nothing in the support discussions to help. Quite frankly, I do not understand why Apple, with tech equipment that is so well designed and elegant, still puts out such a lousy piece of software that you are held hostage to use. I have hit a wall - I hope you get a response and help! I've run out of ideas!

  • Newly installed OS X will not start up on new hard drive

    Hello helpers,
    I have many problems with my Power book g4 titanium. Most critical: I have just replaced my Hard drive with a new 120 gb. I also, purchased a new dvd OS X 10.4 full retail version. I installed it onto the new hard drive. It loaded properly and said to restart. Well thats it. It will not restart. It acts like it is going to restart. But, all I get is the apple with a little wheel timer thing. I waited for several hours and that is all it does. Please help.
    Many grateful thanks,
    Rembrandt0328

    I suggest you re-prep your new drive then reinstall OS X.
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button and select the Apple Partition Map scheme, then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    When formatting has completed and the new volume has re-mounted on the Desktop quit DU and return to the installer. Proceed to install OS X.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • I upgraded to Firefox 6 and when I reboot it will not start up again

    when it told me to reboot my system I did but the download would not start so I tried to download again but it keeps telling me tha reboot in order to finish the previous download

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • After a firefox "upgrade" was installed automatically, Firefox will not start, even in Safe mode. Clicking on the icon does nothing

    after a firefox upgrade was auto-installed, firefox no longer will launch. clicking on the icon does nothing. can't start in safe mode
    == This happened ==
    Not sure how often
    == firefox upgrade auto-installed ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10

    You can try to disable the Java Quick starter and the Java Console extension in the Control Panel > Java.
    Control Panel > Java > Advanced tab > Miscellaneous >Java Quick Starter (disable)
    You can also disable the Java plugin in Firefox: Tools > Add-ons > Plugins
    See [[Troubleshooting extensions and themes]]
    See [[Troubleshooting plugins]]

  • Oracle 10G Non-Network install - OEM will not start when on the LAN.

    Greetings,
    Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
    Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
    In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
    The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
    ===========================================================
    IP_address hostname.domainname hostname
    where:
    IP_address is the non-routable IP address you entered for the loopback adapter.
    hostname is the name of the computer.
    domainname is the name of the domain.
    For example:
    10.10.10.10 mycomputer.mydomain.com mycomputer
    ==========================================================
    In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    192.168.110.250 IBM-6AB1330E158
    ==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
    IP_address hostname.domainname
    - not -
    IP_address hostname.domainname hostname
    Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
    Thanks in Advance for any help,
    ADG13

    I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
    And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
    fwiw,
    ADG13
    C:\Documents and Settings\Administrator>ipconfig/all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : IBM-6AB1330E158
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : ibm.com
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Loopback Adapter
    Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.110.250
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
    Physical Address. . . . . . . . . : 00-11-25-13-96-AF
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.102
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 65.24.7.3
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
    Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
    Ethernet adapter AGN Virtual Network Adapter:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . : AGN Virtual Network Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-01
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 9.49.217.159
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . :
    DHCP Server . . . . . . . . . . . : 9.49.217.159
    DNS Servers . . . . . . . . . . . : 9.0.2.1
    9.0.3.1
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
    Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

    When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

    I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
    https://discussions.apple.com/thread/5831093

  • I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

    I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

    Query by serial number
    Apple's warrenty database will identify the type of Mac you have.  Your serial number is securely sent, but you get only the name of your machine.
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
       ( hint by K Shaffer  )

  • T500 shuts down/or freezes when I plug in my AC adapter and now will not start up.

    I have had my T500 for two years and I have had endless problems with this laptop. My latest issue started with the computer waking up from sleep mode with a black screen. The computer just froze there and I had to force it to shutdown. When I finally managed to get it started again, the computer gave me an alert saying that a display driver had stopped working. The computer ran fine for a while before it would issue the blue screen of death then have the same black screen issue again and shutdown. Then it got to the point where if I have my computer plugged in it would not even get to the BIOS screen, it would simply loop-restart over and over till I unplugged it, pulled out the battery, put the battery back and turned it on again. Then it would not start at all if I had my adapter plugged in and if I plugged it in at all while the computer was running, it would freeze and after a minute would shut down and again continuously try to start up. Now, the computer will not start in any way, plugged in or no. The lights all turn on like it normally does when it starts up, but then it shuts off and repeats the same process over and over again.
    I have no idea what to do this time and unfortunately being a student I do not have enough money to buy an external harddrive to back up everything on this computer. Frankly with all the problems I have had with this thing, I am considering just throwing it out.

    Try making a bootable Ubuntu disc and running that for a while. It's possible your Windows install is hosed.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • My Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

    my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

    Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.

  • I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My imac will not start - it is hunged up, when I turn it on I see the apple and the little wheel go around and around and nothing happens - what can I do ???

    Hello - can anybody help me - my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around  HELP !!

    Restart in Safe Mode, this will clear some caches. How you do this is when you hear the startup tone hold down the Shift Key until you see the progress bar appear. Let it fully boot, then open System Preferences - Startup Disk and ensure your internal HD is selected and then click Restart to test. If you still don't have luck you should run Apple Hardware Test in Extended Mode, you may need to run the test 2-3 times to report any errors. To run AHT you will need teh ORIGINAL Install Discs that shipped with the computer. Instructions for AHT are in:
    http://support.apple.com/kb/HT1509
    Have you been backiing up?

  • Will not start even in safe boot after installing latest camera update

    MacBook Pro will not start even in safe boot after installing latest camera update.
    I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

    I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
    If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

  • OS 9 will not start, but its installed

    I did a software restore on my G4 flat panel mac os 10.2.8. Now classic will not start. I dragged the system folder for mac os 9 to my hard drive, which was located on the mac os 9 install cd. I am unable to start my computer from the os 9 cd. When I open system preferences and under the classic folder it says select a system folder for classic. Under Hard drive the system folder is highlighted. However, when I start classic, i get this white box which says: The system software on the startup disk only functions on the original media, not if copied to another drive. In the background is the much larger box that always shows up when classic starts. But it doesnt start. the white box just appears and I am completely lost. I tried to install os 9, but it says it is already installed and the white box appears again. Please help.

    Medina,
    6 CDs is exactly right, these are your restore discs. You should be able to insert the first one and run the restore program. If I could find my copies of the 6 CD's from my old iMacG4 (now given away) I could tell you exactly where to look, but it's can't see the wood for the trees here.
    Always the last place you look. And now I see what you mean. And this now explains everything.
    I think that the 6 CDs you have are exactly the same as mine, that is they are for a first generation FP iMac. For this iMac you had to boot of the first CD (into OS9 - despite what I assumed earlier). This would explain the presence of an OS9 System Folder on the restore CDs.
    Now if you cannot boot from the first CD, it would suggest that these CDs did not come with your iMac. I'd be a bit perplexed as to how you managed to restore OSX 10.2 (in your first post) and now you're up to OSX 10.3.
    None of this matters though. With a bit of copying you should be able to get a usable OS9 system folder onto your iMac. You'll need about 5G of free disk space.
    On each CD is a Configurations folder. In there is a disk image "iMac HD Disc #", where # is from 1 to 6. You should copy each of these to your iMac internal hard disk, in a folder all of their own. Then mount the first disk image, all the rest should be used as required and you'll end up with an original iMac mounted disk image. You can then copy the System Folder from that to your internal hard disk. Then unmount the disk image and trash the 6 disk image files.
    If you need more detailed instructions, let us know.

Maybe you are looking for