When installing iTunes the installer tries to put it in the wrong drive
When installing iTunes the installer tries to put iTunes in a network drive instead of the "C" drive.
Yes, I thought it would do that too, but it keeps coming back with a drive error for a network drive that I am not connected to and don't want it there.
Similar Messages
-
what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
"There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Need to know because this is driving me nuts now!Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
"the feature you are trying to use is on a network resource" is the message error I received when installing itunes. I downloaded the file and saved it. The same thing happended when I simply ran it as well.
Hello, uclan1.
This article will help you with the error that you are receiving.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
When install iTunes 11.1.4 It says Apple Mobile Device Service service will not start. It was started when I began the installation. Is this an Apple software bug?
I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
https://discussions.apple.com/thread/5831093 -
When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
What software are you trying to install?
-
I am trying to install iTunes on a windows 7/64 OS. the 32 bit version said that I needed the 64 bit version. The 64 bit version syas that it is not a valid Win32 application. How do I get around this problem??
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I am trying to install iTunes 10.7. The installation gets all the way to the end and says "removing application" then stops and gives me an error message that states there is a missing file and it cannot complete the configuration. Please contact my support or package dealer."
Confused - my old itunes worked fine - haven't removed any programs, etc.,
HelpTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
When I install itunes I received an error message like this:The exception unknown software exception (0Xc06007e) ocurred in the application at location 0x7c812afb. After the installation the computer is showing the message every time.
If you update your QuickTime Player, does that clear up the iTunes message?
-
I was using firefox 5.0.1 & it was crashing frequently.I removed the installation & tried to reinstall.I getting a window asking for adminstrator password.Even after entering password,firefox was not getting installed
Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
<u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
<u>Second: try a New Profile</u>
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default -
when installing adobe reader on my mac it states that the install is complete, but on same screen its sets thaw an internal server error has occurred and reader will not work
Hi,
I have exactly the same problem on one of my Macs (MBP 15 Mid-2010 / OS X Yosemite): Both reader and Acrobat Pro download without a hitch. Both also install with no problem.
But once you click the program to open, they both return "an internal error occurred".
I tried downloading three separate copies, and still get the same error message when I install and launch. I've also uninstalled the previous installations via CleanMyMac2 to make sure it's no longer in the SSD. Same results.
Am using a new SSD as internal boot drive, with fresh / clean installation of OS X and Apps (previous internal HDD crashed) -- And am seeing errors not only with Acrobat, but also with LR5 which always comes up with a "An error occurred when attempting to change modules" -- inspite or uninstall, download and reinstall. Not sure if it's a registry issue? (Not even sure if that's the case with OS X).
Do I need to reformat the whole SSD? I hope not!
Thanks
Edwin -
I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?
I don't think so. When you open iTunes, go to "Store" on the top and click "Authorize this Computer." Type in your email and pass, and click authorize. Then, when you connect you iPod for the first time, it should tell you "this iPod is synced with another computer, blah blah." It should give you the option to either "Erase and Sync," or "Transfer Purchases." Click "Transfer Purchases and your content should go into your new iTunes.
If this doesn't work and you still have your old computer there's another thing you can do. I know this works on windows, but I'm not sure how to do it on a Mac, maybe someone can offer some help. Assuming you have Windows, go to Start>Music>iTunes Media and you should see Music, Apps, Movies, etc. This is all the stuff in your iTunes. If you have an external hard drive or your iTunes library is small in terms of file size, you can do this in one go. Transfer the content (as much as you can fit at one time) onto the external storage. Then, put that content on your new computer on the desktop or somewhere where you can find it again. Open iTunes, and folder by folder highlight everything in the folder and drag it into the iTunes library. It should say "importing (content)" or something and then it should be in your library. If you look in your Music folder again, there should now be another "iTunes" folder there with all of your content back in it.
Hope one if these options works for you. Best of luck! -
I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge my ipod on my computer.
I have used PCs for years, and still do at work. But, last year my wife bought me a 15" MBP with the anti-glare screen (I was getting ready to buy for myself). It took me all of 1 week to completely get used to the UI for OS-X, and now I really prefer it over the Win7 UI. I have no experience with Win8. Here are my thoughts:
1) You can get a good computer using either a Win8 machine or a Mac.
2) You will pay less for an equivalent PC. But not as much less as some would have you believe. You need to take into account the all aluminum body of the Mac (vs most PCs being plastic) and the size of the display. And, don't forget that there is a lot of bundled SW on the Mac that you will actually find useful and would have to purchase for the PC.
3) You can probably do everything you need on the PC platform with the right SW (you probably already know this since you are using one already).
That said, I think some things are easier on the Mac. For example, GarageBand is a standard part of the Mac SW installation. I got up and running recording directly from my bass into a track with a song imported from iTunes on another track in a snap. I only had to purchase a Jam adapter ($99) for the bass so I could come in over USB instead of using the audio in port (which did work, by the way). You can do the same on a PC, but you have to purchase the SW from somewhere. And, it probably isn't cheap.
I use VMware Fusion to run those Win programs I already owned because it was much less expensive to buy Fusion than to replace them.
I would not return to a PC for my own use, given a choice. But, I would be very careful about getting my wife a Mac without careful thought as she is not as tolerant of learning new things as I am.
So, there you go. -
I keep getting an error message when installing iTunes with windows 8
See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2 -
When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons. How can I install it so it doesn't do that? Thanks!
You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.
Maybe you are looking for
-
Fail to create an instance of Job
I try to create a data source with a BO XI 4.1 Universe. My Universe works with WEBI but whenever I try to use it in Design Studio, I get an error message. Caused by: com.businessobjects.dsl.services.dataprovider.DataProviderException: Fail to create
-
Hi all, would like to check if the 2504 is compatible with the W530? I do realize it will miss the USB3.0 functionality, but that is not an issue. Solved! Go to Solution.
-
I am beginner to 3d programming..... i have done few example on 3d programming...... In those examples we have used applet and to execute it as frame we have used createFrame() method... now i want to do my 3d programe on my custom class which extend
-
How to create a new "key combination"
Hi, gurus, I need I now key combination like "sales organiztion/distribution channel/sales office" in a conditon type. How can I set in IMG? Thanks advance.
-
Datatypes in a recursive common table expression
I'm trying to use a (recursive) common table expression to generate a list of dates. The following code is working fine with 11.2 WITH dates ( nr, dt ) AS ( SELECT 1, DATE '2005-02-01' from dual UNION ALL SELECT d.nr + 1, DATE '2005-0