When installing Logic Pro 8, "skip" is enabled/greyed out on Logic Pro Box

Hey all
I'm trying to install Logic Pro 8 for the first time on on iMac, however when i get to the custom install options, the "skip" box next to Logic Pro is enabled, and greyed out, and i can't change it, therefore i can't actually install Logic. I can install main stage, compressor etc, but not logic.
Any ideas? I have no trace of previous installations on my system as its never been installed with this set up of snow leopard, but i have double checked everywhere in my prefs, application support etc.
I'm confused and its very frustrating!

Use Pacifist to install it manually.
(48572)

Similar Messages

  • HT1351 I would like to sync ITUNES to my IPOD.  When I click on devices the sync is greyed out.  can anyone help

    I would like to sync ITUNES to my IPOD.  When I click on devices the sync is greyed out.  can anyone help.  I am running Windows 8

    You need to select your iPod in iTunes.  The command (from the menu bar?) is disabled because you have not selected a device for which the command is applicable.
    The latest iTunes may hide the sidebar.  To show the sidebar, from the menu bar, under View, select Show Sidebar.  In the sidebar, find and select the iPod under DEVICES. 
    Once the iPod is selected, you can select the Sync command under File -> Devices in the menu bar.  You can also just click the Sync button at the bottom left corner of the iTunes window (when the iPod is selected).

  • I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

    I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

    Hi
    My first thoughts are
    • iMovie ill behaving - Trash the iMovie pref file - use to set things right
    • in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
    Yours Bengt W

  • How can I enable 16 outs from Logic with Intel Mac Pro?

    Hi everyone,
    I am a bit new to the digital output world! I have a Digi002 with Logic 7 and I have a Behringer A/D converter box to recieve digital output using optical cable. My question is this: I can only see 8 normal stereo outputs plus additional 9-10 output. Is there a command in Logic (as per the old "enable 16 in/outs in 5.5)to allow the greyed out extra outputs to work? or I am being very stupid and not enabling some command on the Mac?
    I thank you all in advance for any kind responses!

    I see you're using a Behringer A/D converter. I had one of these once. It made a lot of noise: crackling, pops etc. I know that was the cause as they only happened on those 8 tracks.
    I may have had a lemon, but if you get similar problems, (and I hope you don't) I have changed to the Alesis AI3 and now have no problems, it might be worth you making a mental note.

  • Why is "edit in Audition" greyed out in Premiere Pro and After Effects?

    Since the CC 2014 launch, the option in in Premiere Pro and After Effects to "edit in Audition" is greyed out. Right-clicking a clip in Premiere Pro doesn't have an option for Audition. I cannot send my compositions, sequences or clips to Audition for audio editing. I contacted an Adobe Support personnel earlier this evening. They suggested to go into my Mac's System Preferences and enable a root user, log out of my account, log into the root user, shut down and boot up into safe mode. None of these scenarios worked. It is still greyed out, in both user accounts.
    Is this a known issue? I even uninstalled and reinstalled Audition. Still nothing. All my Adobe apps are updated. My Mac is updated. Again, never had this issue before.
    I'd appreciate any assistance!
    Thank you!
    Cheers,
    Evan Lockhart

    I may have an answer for you, but not sure if my resolution will work for Macs.
    First, here's my system and initial info. I'm using a work computer, operating system is Windows 7. I just upgraded to Adobe CC 2014 about a week ago, and I also uninstalled the previous versions of all my Creative Cloud programs after installing the new versions (CC 2014 doesn't just update the previous version, it installs a new program and doesn't automatically uninstall the previous CC programs). Not sure if the uninstall is necessary, for this resolution to work.
    Anyway, after I installed Premiere Pro CC 2014 and Audition CC 2014, the Edit Clip in Adobe Audition command was available from the Edit menu in the Menu bar, but was disabled in the right-click menu for the sequence (for the right-click menu, it was visible, but greyed out and disabled). When I tried to use the command from the Edit menu in the Menu bar, it gave me a dialog box to fill out and it created a new folder (titled "Adobe Audition Interchange"). So, the command, when selected from the "Edit menu" obviously uses a different process than the command from the right-click menu. Anyway, I didn't want a new folder created or to fill out a dialog box, I just wanted it to behave like it used to. Basically, when I right-click the sequence and select Edit Clip in Adobe Audition from the right-click menu, it just opens Audition and the audio waveform is visible.
    I was able to resolve this and get the right-click command working by reading a couple of articles on this same issue from Adobe CC (not CC 2014) and using those to figure out how to fix this in Adobe CC 2014.
    Here's what I did:
    I had to locate my .sesx files in my system. They are NOT in the same location as they were for the previous version of CC (at least, they weren't for me). I had to use the Search command and look for .sesx extensions to locate them.
    Found them under the path C:>Users>Public>Public Documents>Adobe>Audition>7.0>Session Templates. Note that (for me), there was a folder titled 6.0 on the same level as the 7.0 folder. I selected the 7.0 folder as that folder contained the most recent set of .sesx files. I checked the 6.0 folder and those were the .sesx files from the previous version, so I deleted that folder just as a clean-up step.
    I right-clicked on one of the .sesx files in the Session Templates folder and then selected Open with from the right-click menu. The Open with dialog box displays and provides a list of programs.
    I selected Adobe Audition CC 2014 from the list of programs (you may have to browse to find it) and then selected Always use the selected program to open this kind of file. I then clicked OK to submit the configuration command and close the Open with dialog box.
    I restarted Premiere Pro CC 2014 and the Edit Clip In Adobe Audition command was now enabled on the right-click menu and was working properly.
    I wept with joy..... OK, not really, but I'm always irritated at ridiculous regression errors and a lack of thorough testing of new software versions, so I am happy to resolve frustrating issues.
    Don't know if this will help you, or if you already resolved your issue. Either way, good luck!
    ~ Jim

  • Some imessage settings are greyed out on macbook pro

    MacBook Pro
    17-inch, Late 2011
    OS X10.9 (Mavericks)
    Some iMessage settings in the General tab are greyed out:
    Buddy list:
    Account Status:
    When I return:
    When Switching users:
    - iMessage is successfully setup on iPhone, iPad and MacBook;
    - I am the administrator and only user of the laptop;
    - I can change all other settings in iMessage and system-wide;
    - The problem is not affecting the functionality of iMessaging - these are privacy issues;
    - These settings are not offered on my iPhone or iPad, so their settings are not restricting me;
    - I don't know if the problem existed before upgrading to Mavericks;
    - I checked all other System Preferences for settings that may be causing the problem - found none (doesn't mean they aren't there).
    Clearly this is not a crisis situation - it's "only" iMessage which I've chose to enable and will disable if necessary. It's a control issue - Apple has it, I want it back! I have a HUGE problem with any entity dictating - then locking me out of - the settings on my devices, deciding what personal and activity info I share, and with whom. Thanks in advance for helping.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Monitor is enabled - greyed out

    Hi Guys, hopefully a simple one.
    I'm trying to enable the monitor 'Windows Server 2008 Logical Disk - Logical Disk Free Space'. When I look at the properties of this monitor, the 'Monitor is enabled' tick box is greyed out. 
    I read online that you need to put in an override to enable it, so i did this, yet it's still in the same state. So my question/s:
    1) what do i need to do to enable it?
    2) If I have to use an override to enable it, do I have to specify the parameters within the override itself i.e. thresholds etc.?
    Here is a picture of the override that I currently have in place.
    Thanks, David.

    Hi,
    >do I have to specify the parameters within the override itself i.e. thresholds etc.?
    No, you do not have to override all parameters, only those you need to change.
    Monitor in Authoring tab will remain 'gray', this panel doesn't show overrides because you can have many overrides for a single monitor (enabled for one server or group of servers, disabled for another).
    http://OpsMgr.ru/

  • From FCP timeline...send to soundtrack pro audio file project is greyed out

    The send to multi track is not greyed out but that's not what I need.
    The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track.
    If I use "open in editor" to open a stereo file from the timeline soundtrack only imports one channel.
    I'm trying to run these stero audio clips through STP using the waveform editor to quickly analyze and fix the "clicks and pops" also adding a low cut off filter to some of the clips to help eliminate some wind noise.
    Seems the only way I can get it to work is to export each clip as an aiff file and then import it to STP, edit non destructively, save as a .stap file and then reimport that .stap file back into FCP........
    Any ideas why the "send to STP audio file project" is greyed out? perhaps I have forgotten a preference setting somewhere?
    All help appreciated.
    Thanks,
    Dave
    G5 dual 2.0, 3.0 GB ram, 2x250 internal   Mac OS X (10.3.9)   FCP 5.0.4 DVDSP 4.0.3 Motion 2.0.1 Soundtrack pro 1.0.3 QT 7.0.4

    Hey, Dave. That can happen if you captured your files with two audio tracks instead of a single stereo track. The two channels will show up on two tracks, but they're not actually stereo in the quicktime file.
    When you captured, did you click the "OO" button next to the audio channels to link them to stereo? You can look at the contents of the quicktime file with Quicktime Player and see if you've got one audio track with two channels assigned to "left" and "right". If you have some other configuration in the file, check out these old threads for workarounds, or recapture if that's an option.
    http://discussions.apple.com/message.jspa?messageID=1456638
    http://discussions.apple.com/thread.jspa?threadID=259929

  • Macbook pro and photosmart 7960 connection greyed out.

    Macbook pro 10.7.5 Lion. trying to connect a HP photosmart 7960. via USB, the printer used to work on my macbook pro ,  every box is now greyed out , Add, print & scan. I hagve tried everything to no avail.
    When connected to my sons macbook it regsters but reads not connected.
    Edward.

    Hello Edward,
    Thank you for clarifying.
    I would first suggest performing a cold reset to the printer by following these steps
    Press the Power button () to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button () to turn it on.
    If the same persists, may you have any other PC? (e.g. a Windows PC) to have a test on it?
    That in order to double check, as the issue seems too common for both of the Macs and likely to indicate an hardware failure with the USB port of the printer...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Video rendering and playback option greyed out on Premiere Pro CC 2014

    I cannot even click on the Video rendering and playback drop down menu as it is greyed out.
    I have a GeForce GTX 660 2GB card which should be supported as it has enough memory. I am on Windows 7.
    Would really appreciate if someone has a solution how to enable Mercury Playback Engine in this situation.

    Managed to fix the problem by downloading and installing the GeForce CUDA drivers as well as updating graphics card firmware.
    The Mercury Playback engine enabled itself in premiere after the updates.

  • Why is "Direct Link to Adobe SpeedGrade" greyed out within Premiere Pro?

    Just installed SpeedGrade CC 2014 and "Direct Link to Adobe SpeedGrade" is greyed out from within Premiere Pro CC 2014. Help.

    Great to hear you are up and running again! FYI the is the Creative Cloud App's forum. Future Premiere Pro questions should asked here: Premiere Pro
    Thanks,
    Benjamin

  • Photoshop CC on my Macbook Pro with Retina Display - 3d greyed out

    I have a 2.7 GHZ intel core i7 macbook pro with Retina display. 1024 mb of VRAM. Video cards: Intel HD Graphics 4000 (Built in) and NVIDIA GeForce GT 650M (PCIe). 16GB of RAM on the computer.
    My 3D menu and panel in Photoshop CC is greyed out. I have uninstalled and reinstalled Photoshop and I'm still having the problem. Can anyone else offer a suggestion as to why this might be happening?
    Thanks!
    Jonathan

    PS does not like two dissimilar gpu's.  Try disabling the Intel the check the gpu setting in preferences/performance.

  • Codec settings not available greyed out AME Premiere Pro

    Hello,
    In CC 2014, when I want to transcode something to Quicktime/ProRes codec, the usual "Codec Settings" button in the Video Codec field is greyed out or not available. It was available in CS6... I could click on it and choose settings, but now I can't.
    Just a little bg, but I don't think it matters, I can't choose it no matter what QT codec I choose: I have 23.976 final output that I want to convert to 29.97i for broadcast. Unfortunately, through various tests, in order to get the pulldown correct (without field blurring frames), in CS6 I would set it up in AME, then click the Codec Settings, and select Interlaced. Under Basic Video Settings field all is the usual 29.97, Upper First, etc. But to actually get the correct pulldown (repeat frame every 3 or 4 frames) I need to select the Codec Settings and select interlaced. Unfortunately, in CC 2014, I can't seem to access this option.
    Any ideas? Codecs are in the system, everything else seems as it should be...
    Thanks,
    J

    If the volume/disk is setup to be handled by ACLs (the default for 10.4.x) the older style "inherit permissions" is greyed out.
    You can achieve inherited permissions from adding ACL permissions to the shared volume/folder by going to Sharing, Access "tab" in WGM. The first level of the share is never inherited (no) but the next level "down" will be (yes).
    ACLs on or off is set in WGM by using the All "tab" in Sharing, choosing the volume and the General "tab".
    ACLs override the POSIX settings: owner, group, everyone, and is hierarcial (permission list is read/enforced from top -> bottom, first matching "rule" goes)

  • Text Tools Greyed out Acrobat 9 Pro

    I really need to do a quick fix on a PDF document. My text tools are greyed out. There are no security issues on the document. I put "never"  in the PDF/A view Mode as per another person suggested when I googled. I can't get anything to work.

    I opened the document on my home Mac computer and the text tool worked! My 'newer' home Mac came with Lion. My Mac at work was purchased in May 2008 and it came with Tiger. I had to upgrade it to Leopard and then Snow Leopard, then Lion. I think these upgrades have caused lots of problems. I took my Mac into an Apple Store and they upgraded it to the point for me to purchase Lion, which I did. I have a bunch of Adobe products and have had problems with many of them since upgrading to Lion (Tiger worked great). Bridge gets stuck all the time and I have to force quit it all the time. Can't drag and drop files very easily in Bridge. Photoshop has some problems, and there are other nusances I can't think of right now when I work in InDesign and Illustrator. Just don't know what to do about it. (I am the only Mac user at work.)
    I guess the text tools worked because I shut down the computer at the end of the day. I didn't think about rebooting when I had the problems because I am getting use to having so many! 
    Thanks for trying to help me. If you have hear of any of the other problems I wrote above and can lead me in the right direction, I would be very appreciative.

  • When I load Messages, the preferences option is greyed out

    I've synced Messages with my iPhone and my iPad but haven't been able to do so with my iMac. When I activate Text Message Forwarding for my iMac, it won't send a confirmation code to my computer. Also, when I go into Message on my iMac the Preferences option is greyed out.
    Suggestions?

    Hi,
    In iChat and Messages up to version 8 in Mavericks this was solved by going to ~/Library/Preferences and finding the com.apple.ichat.plist and Dragging it to the Trash and restarting the app.
    Whilst Yosemite still lists Messages as version 8 it is significantly different.
    It seems here the Font AppleGothic.ttf needs to be active (and Validate).
    It may be you need to do both as someone in the Yosemite Community did the deletion first then validated the Font before restarting and then getting their window to look "right".
    9:23 pm      Sunday; October 26, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for