When installing the program Migo Kingston does not recognize as Mozzila web browser

When installing the program to synchronize Kingston Migo driveve my pen with my pc does not recognize as Mozzila web browser

That may be a problem with DDE.
You can try to redo the default browser by making another browser the default.
*http://kb.mozillazine.org/Default_browser
See also:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Similar Messages

  • When installing a new OS it does not recognize my HD as the start up disk

    I am trying to upgrade from 10.6.8 to anything newer. When trying to install any of the newer OS when it prompts me to pick a HD and I pick my internal HD it says that this drive cannot start this computer. Therefore it will not allow me to install the OS. I have verified, repaired, repaired the permissions in the disk utility. I have verified that my internal HD is the start up disk. The computer starts up and

    try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • A family of 5, have new iphone 4s phones.Because we shared an itunes     account previously, now when installing the new phones, it does not allow us to update to individual itunes accounts.  How do we change the accounts for each phone installation?

    A family of 5, have new iphone 4 s phones.
    Because we shared the itunes account previously, on installation of the new devices, the computer does not recognise individual itunes accounts.
    So all 5 devices are sharing the same itunes account!!!
    How do we set up new accounts on each individual phone?

    The iTunes stores in different countries are entirely separate.  You can only use an iTunes store credit in the country in with it was created and purchased content cannot be shared across countries.  Family sharing groups must be country-specific, using iTunes store credits for purchases only within that country, and sharing purchases that were made in that country.  You can contact iTunes store support for more details on these restrictions here: https://www.apple.com/emea/support/itunes/contact.html.

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • Elements Organizer 13.  The program primary window does not open.

    Good afternoon. I installed Elements Organizer. The first some times it has opened correctly and I managed to transfer all photos. But now the program primary window does not open. In dock the active icon appears, in the left top corner there is a name of the program and having clicked with its right mouse button it is possible to open options. What to do in such situation? Photoshop Elements 13 works correctly, but it is very inconvenient to search for photos.

    I managed to locate the problem
    I have an Elgato EyeTV 610. It is an old DVB-C TV Tuner hooked up on Firewire.
    When I remove the EyeTV 610 from the Firewireport it works fine.
    As mentioned in my first posting I was able to have the import window pop up by attaching my camera.
    The workaround also works when pluggin in my iPhone (Import window pops up automatically)

  • I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

    I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes?  I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
    I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

    Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version.  The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

  • My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it.

    My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it. When asked to encrpt the Shuffle I say no, but still not recognized. When I encrypt it, still not recognized (even after it was restored by iTunes). Any suggestions please?

    Did you find a solution?
    My touch is doing the same thing.

  • I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store.

    I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
    Thanks,
    jerson

    It can't. That app is now lost to you.

  • My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on

    My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.

    Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
    Try Recovery Mode... http://support.apple.com/kb/HT1808

  • I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

    I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

    Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.

  • After installing LR (5.5), LR does not recognize  my Tamron 24 70 f/2.8 for Nikon

    After installing LR (5.5), LR does not recognize  my Tamron 24 70 f/2.8 for Nikon, it defaults to the Tamron 28 75. The lens profile is installed. How can I correct this? Thanks.

    Lens profiles are file type-specific, meaning you must have a Raw Lens Profile for a Raw file and a Jpeg Lens Profile for a Jpeg file. If you only have one lens profile installed on your system, it won't work for both types of files.
    Double check to make certain that this isn't the issue.

  • Installed latest Adobe Flash - Incredimail does not recognize!

    Installed latest Adobe Flash - Incredimail does not recognize!

    Can you see the Flash animation at http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html ?
    If so, what version do you have installed.
    Also tell us your operating system and browser.
    [topic moved to Flash Player forum]

  • I get unexpectedly logged out from my mail box and and recieve the following message: "The custom error module does not recognize this error."

    I am repeatedly and unexpectedly logged-out from my mail box when working on a document. It frequently happens when I choose Send or Save, but it could happen any time. The file that I worked on disappears completely. Before, the file could be found in the draft box or some other place categorized as Auto Recovery. Now, instead, I get the following message: "The custom error module does not recognize this error." I am working at home, connected to a university server. The same problem appears with both of my computers, which are connected by a router. I have a MacBook Pro and am working with Firefox 6.0.2. I have a wireless broadband connection with Internet. AirPort is connected to Lindstrom and has IP address 192.168.0.198. Router: D-Link Model DIR-635. Modem: ZyXEL Model No. 660H D Triple Play Modem.
    Best wishes,
    Lars Lindström, Professor
    <[email protected]>

    Hi Phil,
    Generally, when a user sends an incoming request to an Exchange 2010 Client Access server using Outlook Web App and the user’s mailbox is on an Exchange 2010 mailbox in a different Active Directory site,
    Exchange 2010 determines whether the Client Access server has the
    ExternalURL property set in that Active Directory site. If it is and the cross-site silent redirection has been enabled, the user will be automatically redirected to the specified URL.
    Thus, please make sure the External URL property is set properly in your environment. And also
    disable the WindowsAuthentication for OWA VD to have a try. If the issue persists, please try the following KB to reset the Outlook Web Access-related virtual directories:
    http://support.microsoft.com/kb/941201
    Thanks,
    Winnie Liang
    TechNet Community Support
    Sorry for the late reply.  Yes, the ExternalURL is set; otherwise, it wouldn't work at all.  98% of the time everything is fine.
    My issue described a problem that appears only during session timeouts.  I've pretty much verified that this is the case; Exchange 2010 does not appropriately handle the timeouts sometimes when using cross-site redirection.

  • My ipod is not charging anymore I try to do it.  When I go on itunes, it does not recognize my ipod

    my ipod is not charging anymore I try to do it.  When I go on itunes, it does not recognize my ipod

    Try here:
    iPod touch: Hardware troubleshooting
    Also try another cable, usb port and computer.

  • How can I get my iMac to reconize my LG Optimus 5 phone so I can transfer itunes. When I plug it in it does not recognize the phone

    I have an iMac that I want to transfer stored itunes to my Optimus LG 5 android phone. When I plug my phone into the computer the computer does not recognize the phone. What can I do to so I can then transfer my tunes?

    The screen is all black, so it's not the backlight. It's weird because when I get the computer off of sleep mode, it shows the log in screen really quickly. So my LCD isn't broken either. It just switches back to the wrong resolution I guess. Which makes the screen black again.

Maybe you are looking for

  • Getting Error while creating Score card

    Hi , I was trying to create a score card using a simple BW query. But I am getting the following error whenever I run the application. Data Provider "" could not be parameterized: Group: DATAPROVIDER Type: null Name: Init parameters:<parameterList> <

  • Function module in abap hr

    Hi friends i am new to abap.....i was given a funtion module to work on.. here i  am sending the req...can any one plz tell how to write code for the following: This is recivel of IBG bank account number. only 2 banks hsbc(Bank code = 7232) lenght 4

  • Getting Client IP address in Webcenter access log files

    In addition to Understanding Webcenter Spaces Access Log File I want to trace the IP address of the client machine from where webcenter spaces is being accessed. How to capture this? Please help. -- Navin K

  • Has anyone experienced a problem where Mission control randomly changes the window?

    Focus will be shifted from randomly between windows and desktops or windows will be resized

  • Open windows calculator

    db and dev 10g rel2 , i am trying to open the win's calculator with a command in my form , i am using this code and it works fine host('calc') ; but it is shown as minimized in the task bar , i want it to be displayed on the canvas , 1- i want it to