When iPad connected to Mac Pro, images from iPad camera auto open Aperture
Hi, When open Mac Pro with i Pad connected, Aperture opens atomatically with images from i Pad camera. Checked systen prefs for Mac & Aperture + U tunes for iPad prefs, but cannot find way to stop auto open of Aperture. Help!!!
Look in the application Image Capture on your Mac. In the preferences for Image Capture there will be a setting to choose which, if any, application to open when connecting a camera to your Mac. Change that setting to open nothing.
If you want Aperture to open when you connect your camera to the Mac and it continues to open when you connect your image then just quit Aperture after it opens and then start iTunes.
Any time there are photos in your iPad's Camera Roll. Your Mac will assume you'll want to upload those photos to your Mac.
Similar Messages
-
Everytime I start my MAC, the Applications window opens. How do I prevent that from happening. I just want to see the Desktop with the normal Hardrives and folders I setup on the Desktop.
Start up. Close the offending finder window. Shut down.
Now start up again.
Is it fixed? -
How to view tagged images from the camera in Lightroom?
How do I see a tagged image from the camera (tagged using the lock button, to remind me of a image I want to find quickly) once imported into Lightroom? This is possible to do in Photomechanic, as I can see all of the tagged images from the camera once opened in Photomechanic. Yet so far I have not found a way to allow me to do this in Lightroom so far. Any solutions welcome please.
There isn't a way to do it that is part of Lightroom. There is a plug-in that might help you, though. Check it out here: Locktastic
It doesn't say if its compatible with LR4, but you can try it to find out.
Plug-ins aren't usually as efficient as built-in functionality (like PM), but it might be a solution for you. -
hello ....
my connection problem on my mac pro is :
that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
but when i move the mac pro to another location ... its internet opening speeds up ....
also in one room ... web opening delays .... but on other rooms it is normal
so what can i do to solve this problem ....
Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
thanks for you all ...
Waiting for your support ... as quick as possible ...WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/ -
Why can I no longer import EDITED photo from my iPad to my Mac using Image Capture? This is farcical and a real problem having to email them individually to myself and is totally inefficient time wise compared to previously using image capture! Why change this when it was working well and very quickly until the latest change. Now I have to move files from downloads into an appropriate folder, after emailing each individual edited image to myself, then I have to open in Photoshop and rename the file. This is ludicrous and takes forever to do!
Thank you! I suppected it would be in the settings somewhere. I' ve much to learn...get myself into trouble pushing buttons I don't really understand.
-
How do I transfer raw files from iPad to my Mac Pro?
I transfer RAW and JPEG files from my camera to iPhoto on the iPad using
a camera connection kit. How can I copy the files from the iPad to my Mac Pro?
(I need the RAW files in particular.)The following claims to transfer RAW. Not sure that it will work in the circumstance you describe but may be something to check out: http://www.photosync-app.com/photosync/en/features.html#cluster_1
-
when i connect my ipad to my Mac to update the ipad to IOS7 nothing happen. how can i solve this problem Many thanks, Paul
Can your iPad be upgraded to iOS 7? If so, what are you doing that isn't working?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
When I try to download my pics from my camera with the iPad connection kit, I get a message saying that my device requires too much power.
What model iPad? I upgraded my mini and used the SD card lightning cable last night to transfer raw photo images without any problem.
-
I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it
If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.
-
Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives
Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives ?
I tried to find this answer online but failed.Appears the Mac Pro (Early 2008) is the last model to suggest Ultra ATA/100 optical.
And with an optional card, use Serial Attached SCSI via Mac Pro Raid.
This kind of information gets sketchy in that the hard drive bus and other parts are SATA
and only this (and earlier) model Mac Pro has optical drive interface w/ Ultra ATA/100. The
logic board on the early 2008 appears to have two Serial ATA ports, 3.0GBPS; so to check
these, you may need to look into specification in iFixit.com repair guides, any takeapart
guides, and note specifications in everymac.com and those from mactracker.ca.
The MacPro after Early 2008 model build series (Early 2009) appears to sport an optical
drive with 18x speed, compared to Early 2008 & before, whose drives indicate 16x spec.
Other changes may be indicated by certain parts and differences; processors, graphic
support, and those kinds of things. 2008 shows dual-core, afterward, quad-core.
So on what little I found, that would appear to be the divide or when optical drive spec
on the logic board changed from Ultra ATA/100 to SATA versions. But double check.
Good luck & happy computing! -
How do I export photos on my mac pro to my iPad
Help please....
How do I export photos from my mac pro to my ipad?
JoyThrough iTunes. Use iPhoto to store your photos. iPhoto is part of your iLife applications. Connect your device to the computer and open iTunes. Select your iPad under Devices in iTunes' sidebar. You can now configure what you want to sync to your iPad. When you've dones so click on the Sync button.
Please get iPad User Guide - iOS 6 -
After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback -
When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?
Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
Choose System Preferences from the Apple Menu
Choose Sound
In the output tab you should now be able to make the HDMI "Sticky"
Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI -
No sound when I connect my Macbook pro (2012) to TV via HDMI!
Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!
Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected.
I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor. -
How do i connect a Mac Pro desktop to apple tv
How do i connect a Mac Pro desktop to apple tv
Plug the ATV into the TV. Switch to the appropriate input on the TV to view content from the ATV.
Maybe you are looking for
-
I would be grateful if I could get some help regarding Suitcase. I just installed three updates that were recommended (one was for iTunes, another a security update and to be honest, can't even remember what the third one was for). Anyway, after two
-
After iPhoto update some photos go black when trying to edit them and am unable to edit those photos
After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?
-
Oracle App Server 10.1.2.0.2 operability with Axis SOAP engine
Hi We are planning to deploy client stubs generated using the WSDL2Java tool as provided by Apache Axis, i.e., we would be writing the client side logic for invoking a web service deployed on a different server. For this we are using Axis engine to g
-
Adding new column to Webdynpro Table
Hi How can I add a new column, already one of my friend has added a table to the view in webdynpro, there are 4 columns presently maped to BAPI I need to add 2 new columns to the webdypor table and map it to BAPI. please suggest me. basically I am en
-
My Mac is only a year old and I haven't installed a lot of software, but Sophos has come up with no viruses but 311 issues. Here are the first few lines:Using IDE files:age-amut.ide age-amuy.ide age-amvg.ide age-amxe.ide age-amxg.ide age-amxo.ide age