When iPhone is Locked I do not get a ringtone when getting an incoming call
I am a Newbie here so please forgive me if this is a stupid question. I have tried to search, but cannot find a solution, or at least 1 I can understand. Alright got my first iPhone Friday. I have my phone set to Autolock at 5 min. With this configuration when the phone has entered it's locked state I do not hear a ringtone when I am getting an incoming call. My phone does vibrate, but I want to be able to hear a ringtone. The button on the side is not in SILENT MODE... So I am not sure how to be able to hear a ringtone... if it's even possible. You help is greatly appreciated.
I've seen dumber questions... No worries and no flames from me.
Enjoy your iPhone!
Similar Messages
-
My iPhone 5 lock button does not respond at all I have heard that it's quite a common problem with the iPhone are apple fixing them or do I have to pay to get it done?
As long as the iPhone is a UK ( I assume you are in UK ) purchased iPhone from the normal authorised Resellers ,Apple and the UK carriers and those selling the Carrier's products like CPW or Phones -4 -U etc
-
If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod
Hi Blands02!
Here is an article that will help you troubleshoot this issue:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?
Did you get any answers?
-
my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I have a new iPhone 6 and I am not getting iMessages, only txt messages. How do I change this to receive iMessages, too? My friends are sending me iMessages that I am not receiving.
If you didn't have imessage on and now do, it sometimes takes a while to get synced up.
-
hello,
i'm using iphone 4s in UAE, am not getting facetime calling..plz can u tel me process to activate..You can't, FaceTime is banned there. You won't be able to activate FaceTime in the UAE.
-
my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!
Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H. -
My iPhone 5 lock button is not working
Dear sir,
My iPhone 5 lock button is not working please give me an new iPhone I given an compliant on apple store in Bangalore in imagine store in Mastri mall there not responding to my complaint please I suggest you to please replace an iPhone to new one please I suggest you my sleep wake button is not working from few days I love my iPhone please I suggest you to give an new iPhone I thought apple will sought out my problem please I request you I am from Bellary Karnataka India please I request you sir ....pleaseHi Atique ur rehman,
Thanks for your query.
If the sleep wake button on your iPhone is unresponsive, first try and reset all setting by going to Settings>General>Reset>Reset All Settings.
If this does not resolve the problem, I would sound more like a hardware based issue.
I would recommend that you contact AppleCare so they can run further tests and diagnostics to help you solve your solution better.
If you can also access an Apple Store Genius Bar or Apple Authorized Service Center, that would be much better.
Go to https://locate.apple.com/country for further support with your device!
Thanks,
KL -
My iphone 5 lock button is not working. What should I do now? I bought it in feb 2012
Hi Atique ur rehman,
Thanks for your query.
If the sleep wake button on your iPhone is unresponsive, first try and reset all setting by going to Settings>General>Reset>Reset All Settings.
If this does not resolve the problem, I would sound more like a hardware based issue.
I would recommend that you contact AppleCare so they can run further tests and diagnostics to help you solve your solution better.
If you can also access an Apple Store Genius Bar or Apple Authorized Service Center, that would be much better.
Go to https://locate.apple.com/country for further support with your device!
Thanks,
KL -
TS5180 When taking a incoming call, the speaker does not work
When taking a incoming call, if I put it onto the speaker, the incoming caller can not hear me, nor can I hear them, but the caller has not been cut off, if I turn off the speaker, the call returns to normal.
See Here > http://support.apple.com/kb/TS1630
From Here > TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802 -
I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help
Not all carriers allow that to be set using preferences in the phone. Contact your carrier.
-
Why do all my devices ring when I get an incoming call? How do I turn this off?
Since my last iphone update (8.1.2), everytime I get an incoming call of any form (regular call, facetime, even sms and imessages), all my other devices (ipad, ipods) ring too at the same time. Its driving me crazy. How to I get rid of that?
Settings>FaceTime>Cellular Calls = Off
Cheers,
GB -
I can not get a phone calls from my country after using ssim card here.
Hi I am Amy whoes phone is from South korea using ur ssim card from yesterday in NY.I asked if i can get phones calls from South korea though the number that i used in South korea and they said yes. Not only one but some at AT&T. But i can not get a phone calls. How can i get a call from South korea? Also, I am wondering if i chage the ssim card from you for my original one from south korea by myself to check. Is it possible that after the checking changing original one to new one from you? Thanks,Amy
Reset the network settings, they must still say ATT/Cingular.
-
How do i remove the Icloud Lock on a Iphone that's Clean and can not get in touch with the oraganal owner
thers no you cant put a reset tool on your site to reset phones thats not stolen or in lost modeit's an anti-theft measure DAH Its Not Stolen SO what the crap Then. I wish thay would Remove it From there Ios and Redo it so it Only Locke if you Report it Stolen or enter Lost Mode. BC thers A lot of PPL that abuse it.
Maybe you are looking for
-
How to show a pdf file in bi publisher report
Hi All, We need to show a pdf file as report which was saved in a given location. How to call that pdf file as report. We need to give a hyperlink in the report and when we click on the report the pdf file should be displayed. When we open a report,
-
How to Add Stamp in to Pdf..
hi i'm new to Acrobat scripting. colud please help me in this regrad.. How to add Stamp to Pdf and Review Status is Completed & stamp color changed to red.. Thanks in Advance.. - yajiv
-
I recently built an interactive form with ID6 and active filed in Acrobat, for use throughout my organisation but many of the staff using it are having problem saving it onto the network. I'm being told by my IT support that the form is at fault but
-
How can you tell your iPod t generation
I Need to know how to tell which generation my iPod touch is. It only says 8GB
-
Carry matnr from line item to search help parameter??
Hi All, Is it possible to have a line item material number carried forward into a search help parameter field automatically? So say a user has entered material 123456 in sales order line item and now wants to use the F4 help in the batch fiel