When is BC going to provide Html codes so we can add BC features to Muse?
For more a year I see this same question, not one spokesperson from Adobe has given a straightforward answer. Why are you suggesting we go to 3rd party providers like Wazala, Ecwid, Americart to get add on shopping carts to "insert as HTML" on my Muse built website and are paying 38$ a month to host on BC? Both BC and Muse are Adobe products, I don't know the code but I have a reasonable expectations that your products should work together, if I can't add the same shopping cart features from BC to Muse, really all of BC features to Muse why do I need BC in the first place? When is Adobe going to add all the BC widgets to the Muse library? When is BC going to provide the HTML codes for all the BC features that we can copy and paste in the "insert HTML" option on Muse? Why do I have to go to Wazala? Adobe knew when I used Muse I didn't know the code so don't give me some crazy code based solution, I won't understand anyway. That's why I pay for CC and BC for you to provide it. I would appreciate a response. This is stopping me from making money. My muse site is finished, how do I add the shopping cart from BC? Thank you
There is no widget and there is no indication that this is on the Horizon. I doubt that it will.
Does not mean you can not because there are people who have accomplished this but you need to understand there is several componants to form eCommerce.
- You got shopping cart to view cart which can go into any page, layout or template.
- You have to create your catalogs and products and the layouts for each of those
- You got the payment page and shopping cart
- You have to setup your payment gateway.
With the product layouts you need to insert the features if you want related products, attributes, poplets and configure those as you need based on the site requirements.
Any extras or abilities would be more custom work and use of Javascript.
The implementation of eCommerce is on a lot of guide sites out there and in the documentation:
http://www.bcgurus.com/tutorials/how-to-use-business-catalyst-ecommerce
http://docs.businesscatalyst.com/
There is no click click done sollution for Muse.
Similar Messages
-
I am hoping someone more intelligent than me, can help me out here, as I've got a really infuriating problem.
I tend to visit a lot of online forums, especially in recent days those at Sky (http://helpforum.sky.com/) and Vodafone (http://forum.vodafone.co.uk/)
Whenever I log in, and try and post a message, I keep getting a very annoying error message that says:
"Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."
The problem is, I never use ANY HTML code, as I don't know what it is. I do use spaces, capital letters, standard punctuation marks, and carriage returns/paragraph breaks. This problem doesn't manifest itself on Internet Explorer, nor Opera, nor Chrome.
So what's going on please?!Please try the steps at [[Websites say that Firefox is outdated or incompatible even though it's the latest version]] before trying anything else, then update Firefox [[Update Firefox to the latest version]]
-
When is Verizon going to provide Android v4.3 API level 18?
Google released Jelly Bean 4.3 API level 18 on the 24th of July 2013. When is this going to be provided for the Droid 4? Mine still has Android version 4.1.2, which was released a year ago, and lacks support for low energy Bluetooth and many other new features.
It is unacceptable for Verizon to lag so far behind the Google developers, especially since Google bought Motorola.Likely never. The only phone on 4.3 right now period is the Nexus 4, and the new Nexus 7 tablet has 4.3. The GPE Galaxy S4 and GPE HTC One are probably next in line to get the update, along with possibly the Google Play version of the Galaxy Nexus.
non-Nexus/GPE phones, if they get the update, will lag behind by 6 months to a year, minimum, as normal.
Your Droid 4 was released on 2.3, updated to 4.0 then 4.1, it's already seen RIDICULOUSLY more support than the average android phone will ever see.
Many of the "new features" you refer to require hardware your Droid 4 doesn't have, for example updated versions of the bluetooth hardware inside to conform to the newer bluetooth standard, or require drivers to support the features that haven't yet been written for the particular chipsets and components used in your Droid 4.
Most phones, if they get an android software version update at all, get one update in their life cycle. Yours has seen two, be happy to have gotten the updates you got. -
On first search file:///center%3E,br%3E%3Cbr%3E appears in the search bar looks to be html code that has got in there somehow. How can I remove the unwanted code so that the browser returns to normal.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
After add single signoff HTML code, Portal system can not login in Firefox
We implemented single singon between our Portal system and HCM system.
After we add the single signoff HTML code to the signout.html,expire.html, exception.html file of the web server of portal system, and we change the web profile:
Logout Page:signin.html to signout.html
Signon Page:signon.html to signout.html
We can not login the Portal system in Firefox browser, system display the following error information:
"You must have cookies enabled in order to sign in to your PeopleSoft application."
We can login in the Portal system in IE browser.
We can login the HCM login in FireFox.My HCM and Portal application is 9.0. PeopleToos is 8.49 for the same application.
The Firefox Browser is :3.0.1.
My App, Web and DB server for the HCM and Portal deployed on the same local machine, so the tow application have the same domain.
And the client browser is on the same machine with the server.
And when I remove all the pagelet from the portal homepage, the system report the same error information when login portal system in Firefox. Only when I stop the HCM web server, I can login in portal system in Firefox. -
I am sick of dealing with this issue. I wish not that I had never even started using any Apple products, beginning with iTunes. WHEN IS APPLE GOING TO ADDRESS THIS ISSUE AND MAKE ITUNES SOMEHOW COMPATIBLE WITH DEP IN WINDOWS VISTA?
That being said, Is there any way to resolve this? What I did in the past is completely wipe ALL Apple files from my computer, and install an older version of iTunes. It was at least functional. It seems that any version of iTunes 10.0 or more recent is not compatible with the Data Execution Prevention in Windows. You can not remove iTunes from DEP, yet DEP prevents iTunes from running.
The down side is that I can't get the latest updates for my iPhone or iPod. Now, I have a new phone for my husband that needs syncing on my iTunes, and I can't do that because iTunes won't even open.
Can somebody help me out with this, please?OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
When is Apple going to provide sRGB on the iPad Retina mini?
I was looking forward for months for the iPad mini Retina. I'm extremely disappointed at the restricted colour gamut which is clear, even without comparing it directly with an Air. When alternative tablets are much cheaper, have both the resolution and sRGB and a GPS chip, how can Apple think this is acceptable? A premium priced product should be premium in execution. If Apple were unable to scource a suitable quality screen (I assume it's the screen as the CPU and GPU are the same as the Air) should they not have been honest and said there would be a delay in launch?
As much as I want one, I won't buy until they show their customers the respect we deserve and upgrade the screen. Having a laptop, I don't need an Air. So please does anyone know when Apple intends to rectify this?This is an iPad user to user forum, so you are not addressing Apple. We have no way to know what and when Apple will do something. You'll have to wait for an announcement by Apple.
Send feedback/suggestions to Apple.
http://www.apple.com/feedback/ipad.html
Cheers, Tom -
When is Apple going to provide us with a non faulty MacBook Pro?
Last month kept me on my feet constantly as I visited the Apple store few times. I`ve seen 8 notebooks. All of them faulty (not only the whine but also keyboard defects, speakers etc.)
Since I am a very stubborn person I decided to buy one, no matter how much time it will take. But I can`t. I simply can`t find a nice, working MBP.Mario, I am with you cous (short for cousin...I am of Hungarian ancestry).
I have been looking, feeling, testing MBPs for the last two months. I have three stores within two miles of my house that carry Apple products.
I have played with probably ten 15" MBPs, and I have yet to see one I could buy.
Of the three 17" MBPs I have seen, only one is anywhere near acceptable in terms of heat (to me).
Do I need statistical proof after this experience?
I sent back a perfectly good Thinkpad T60 (which had the Core-Duo and ran cool and quiet) to make the jump to OSX. I have been waiting....geesh..,over two months now.... 8-(
Anyway, I am going to hang in there. I have faith that Apple will get it right eventually. -
When are you going to provide support for PVCS ?
Hello,
Any chance of Oracle providing support for PVCS ? It seems rather odd to me that you provide an add-in for it in Forms & Reports but not in Jdev.Hi,
We're investigating some possible solutions to bring PVCS support into JDeveloper, but I'm afraid this definitely won't be in the next release (9.0.3) which has been feature-frozen for some time now. In the meantime, you can use the SCM Extension API to write an extension for any source control system, or use the ToolManager extension downloadable from OTN to plug menu items in to the IDE to invoke SCM command line operations.
Forms and Reports are written in C++ and have a completely different architecture to JDeveloper, so it's not possible to utilize the support in those existing products for PVCS within JDeveloper.
Thanks,
Brian
JDev Team (SCM) -
The title says it all....
Hi red_151,
If you have checked the forums then most likely you must have checked the following KB : Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Also please try steps mentioned in the thread : https://forums.adobe.com/message/4950628
Regards,
Rave -
My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart the device. But, does not respond to typing. How can I revive the device?
The device was synced to icloud some time ago. The Laptop PC I normally use with the device is not with me now and is being formatted for a different reason.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi,
Is it possible to embed HTML code into an Apple Mail message? If it isn't, this would be a really useful feature. Lots of sites now, such as YouTube and Flickr, provide snippets of HTML code that you can copy and paste into your "webpage". But how useful would it be if you could paste this code directly into an e-mail? That way you could do things such as embed a YouTube video into an e-mail, rather than just provide a link to it.You can do it, but it will not be the easiest thing, and it's generally frowned on, since HTML email is used by spammers and marketers to track whether or not you open their emails. It's much easier and more accepted to just send a link to something you want someone to see; not everyone has time time, patience, or affordable broadband to download a web page with an embedded video window.
You'd have to do the coding yourself, test it to be sure it works when sending and receiving, and then send it to everyone you want to see it. That's a lot of work for no real benefit. According to Apple, Mail in 10.5 allows the sending of HTML using the Stationery feature; have you tested that or checked the Help files for that to see how it's done?
Mulder -
Can't access HTML code in Eloqua
I want to enhance the functionality and looks and mobile email template. For that I am trying to access HTML Editor to modify HTML code. How can I edit HTML codes in Eloqua10?
Hello Hammad,
When it comes to email mobile templates, the feature that makes them a mobile template is the CSS code that can be accessed by going to the toolbox as demonstrated below:
What this means to you is the following:
While you cannot access the full source code of this email -- because it is a templated email and not an html uploaded email, you have two options to customize it:
1) You can delete ALL the contents that come with the template -- the default image and text, and then add your contents to it.
2) You can upload an email and use the css code that appears in the screenshot above.
Hope this helps.
Thanks,
Tarek -
Preview in browser shows html code
Can't get DW to display my design, I go to "preview in
browser" and it goes to the browser and shows the html code
instead. Can someone help me fix that?<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<!-- TemplateBeginEditable name="doctitle" -->
<title>Untitled Document</title>
<!-- TemplateEndEditable -->
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
<style type="text/css">
<!--
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #666666;
margin: 0; /* it's good practice to zero the margin and
padding of the body element to account for differing browser
defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5*
browsers. The text is then set to the left aligned default in the
#container selector */
color: #000000;
/* Tips for Elastic layouts
1. Since the elastic layouts overall sizing is based on the
user's default fonts size, they are more unpredictable. Used
correctly, they are also more accessible for those that need larger
fonts size since the line length remains proportionate.
2. Sizing of divs in this layout are based on the 100% font
size in the body element. If you decrease the text size overall by
using a font-size: 80% on the body element or the #container,
remember that the entire layout will downsize proportionately. You
may want to increase the widths of the various divs to compensate
for this.
3. If font sizing is changed in differing amounts on each div
instead of on the overall design (ie: #sidebar1 is given a 70% font
size and #mainContent is given an 85% font size), this will
proportionately change each of the divs overall size. You may want
to adjust based on your final font sizing.
.twoColElsLtHdr #container {
width: 46em; /* this width will create a container that will
fit in an 800px browser window if text is left at browser default
font sizes */
background: #FFFFFF;
margin: 0 auto; /* the auto margins (in conjunction with a
width) center the page */
border: 1px solid #000000;
text-align: left; /* this overrides the text-align: center
on the body element. */
.twoColElsLtHdr #header {
background: #DDDDDD;
padding: 0 10px; /* this padding matches the left alignment
of the elements in the divs that appear beneath it. If an image is
used in the #header instead of text, you may want to remove the
padding. */
.twoColElsLtHdr #header h1 {
margin: 0; /* zeroing the margin of the last element in the
#header div will avoid margin collapse - an unexplainable space
between divs. If the div has a border around it, this is not
necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will
allow you to keep the element away from the edges of the div */
/* Tips for sidebar1:
1. Be aware that if you set a font-size value on this div,
the overall width of the div will be adjusted accordingly.
2. Since we are working in ems, it's best not to use padding
on the sidebar itself. It will be added to the width for standards
compliant browsers creating an unknown actual width.
3. Space between the side of the div and the elements within
it can be created by placing a left and right margin on those
elements as seen in the ".twoColElsLtHdr #sidebar1 p" rule.
.twoColElsLtHdr #sidebar1 {
float: left;
width: 12em; /* since this element is floated, a width must
be given */
background: #EBEBEB; /* the background color will be
displayed for the length of the content in the column, but no
further */
padding: 15px 0; /* top and bottom padding create visual
space within this div */
.twoColElsLtHdr #sidebar1 h3, .twoColElsLtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be
given to every element that will be placed in the side columns */
margin-right: 10px;
/* Tips for mainContent:
1. If you give this #mainContent div a font-size value
different than the #sidebar1 div, the margins of the #mainContent
div will be based on its font-size and the width of the #sidebar1
div will be based on its font-size. You may wish to adjust the
values of these divs.
2. The space between the mainContent and sidebar1 is created
with the left margin on the mainContent div. No matter how much
content the sidebar1 div contains, the column space will remain.
You can remove this left margin if you want the #mainContent div's
text to fill the #sidebar1 space when the content in #sidebar1
ends.
3. To avoid float drop, you may need to test to determine the
approximate maximum image/element size since this layout is based
on the user's font sizing combined with the values you set.
However, if the user has their browser font size set lower than
normal, less space will be available in the #mainContent div than
you may see on testing.
4. In the Internet Explorer Conditional Comment below, the
zoom property is used to give the mainContent "hasLayout." This
avoids several IE-specific bugs that may occur.
.twoColElsLtHdr #mainContent {
margin: 0 1.5em 0 13em; /* the right margin can be given in
ems or pixels. It creates the space down the right side of the
page. */
.twoColElsLtHdr #footer {
padding: 0 10px; /* this padding matches the left alignment
of the elements in the divs that appear above it. */
background:#DDDDDD;
.twoColElsLtHdr #footer p {
margin: 0; /* zeroing the margins of the first element in
the footer will avoid the possibility of margin collapse - a space
between divs */
padding: 10px 0; /* padding on this element will create
space, just as the the margin would have, without the margin
collapse issue */
/* Miscellaneous classes for reuse */
.fltrt { /* this class can be used to float an element right
in your page. The floated element must precede the element it
should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left
in your page */
float: left;
margin-right: 8px;
.clearfloat { /* this class should be placed on a div or
break element and should be the final element before the close of a
container that should fully contain a float */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
-->
</style><!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional
comment */
.twoColElsLtHdr #sidebar1 { padding-top: 30px; }
.twoColElsLtHdr #mainContent { zoom: 1; padding-top: 15px; }
/* the above proprietary zoom property gives IE the hasLayout
it needs to avoid several bugs */
</style>
<![endif]--></head>
<body class="twoColElsLtHdr">
<div id="container">
<div id="header">
<h1><img src="../MASTHEAD.jpg" width="720"
height="269" /></h1>
<!-- end #header --></div>
<div id="sidebar1">
<blockquote>
<pre> </pre>
</blockquote>
<h3>Landscaping</h3>
<p><strong>Lawn Care</strong></p>
<p><strong>Chemical
Services</strong></p>
<p><strong>Tree
Services</strong></p>
<p><strong>Retaining
Walls</strong></p>
<p><strong>Water
Gardens</strong></p>
<p><strong>Special
Projects</strong></p>
<p> </p>
<!-- end #sidebar1 --></div>
<div id="mainContent">
<h1> GET THE EDGE</h1>
<p>Custom Edges Enterprises gives you the edge when it
comes to landscape design, implementation and
maintenance.</p>
<p>Residential and commercial properties thrive under
the supervision and attention of Custom Edges
Enterpirses.</p>
<!-- end #mainContent --></div>
<!-- This clearing element should immediately follow the
#mainContent div in order to force the #container div to contain
all child floats --><br class="clearfloat" />
<div id="footer">
<p>Footer</p>
<!-- end #footer --></div>
<!-- end #container --></div>
</body>
</html> -
RH Automatically Changing HTML Code for Links
For some reason, RH is doing something to the links I create. In my stylesheet, I have the following code for links:
a {
color: #054abc;
cursor: pointer;
a:hover {
color: #336699;
text-decoration: none;
a:active {
color: #333333;
When I create a link, the HTML code looks like this *at first*:
<a href="Development_Plan.htm">Development Plan</a>
But then, after I save the file and switch to HTML view, the code looks like this:
<a href=" Development_Plan.htm" style="color: #0000ff; text-decoration: underline; ">Transcript</a>
I am not doing anything other than saving the file, and that apparently causes RH to automatically add the style (color and text-decoration). Why is RH adding that? It's causing my links not to change color when you hover over them.
How can I make RH stop doing that, so my links display as defined in the stylesheet?Hi,
This is strange behaviour. How exactly do you create a hyperlink? I have seen this behaviour only with links that are empty or contain a single space.
As a workaround, in your css, add the !important declaration to your hover styles:
a:hover
Although this isn't an elegant solution, it will overwrite the inline styling of the link and thus change colour on hover.
Greet,
Willam
Maybe you are looking for
-
Hi, I have created a data server in the topology manager for xsd file with the below paramters in url jdbc:snps:xml?d=E:\ODI\Ibrm_gl_data.xsd&s=GLDATA&dod=true And successfully imported the metada from xsd file in to a model. I have written the below
-
Photoshop CS2 avtivation not recognized
Photoshop CS2 activation not recognized after ATI graphics card driver update. Internet connection live but "No internet connection detected" indicated when trying to reactivate. What's going on???
-
Re: Curve : Handheld device OS 4.5 available (many Carriers)
help me with my bb 8310 i can't use it as mass sorage device
-
Calling a snapshot query from a portlet?
From a portlet, I want to be able to use the EDK to get the results of a snapshot query and display these results in my own manner. Any ideas on how to do this? Looking in the nDocs, I can't seem to find any class in the Plumtree.Remote.PRC namespace
-
Disable Horizontal Scrollbar in Tablecontrol
Hi everyobdy, how Do I disable the horizontal Scrollbar in a TableControl? Best regards, Hartmut