When is disponible Adobe Camrera Raw 6.7 with Olympus E-M5 support?

I'm looking forward

And what is reason for add support in 6.7 version to Canon EOS 5D Mk III, Nikon D4, Nikon D800, Canon EOS 1D X
and not add to Olympus E-M5 presented before any of these?
If i need wait other 3 month for new version 3.8 to support E-M5 RAW i will use other software forever.

Similar Messages

Adobe Camera Raw 6.2 and Olympus E-510 camera profile

Hi all!
When I open a raw file captured from my Olympus E-510 with Adobe Camera Raw 6.2 and go to Camera Calibration tab, ACR doesn't display any profile for my camera, althouth Adobe (http://www.adobe.com/products/photoshop/cameraraw.html) says it supports my model. The same happens at the Lens Correction tab, it doesn't display any profile for Olympus. If I open a raw file from other Camera (Nikon for example) everything is ok. Does anyone know how I'm going to fix this???
Thanks for your time!

You should see an Adobe Standard profile and perhaps an ACR x.x profile for your camera, but Adobe does not make Camera-centric profiles (landscape, portrait, camera neutral, etc) for most cameras unless they are Canon DSLRs, Nikon DSLRs, one Leica and a few Pentax cameras.
On a Vista/Win7 system you can verify what models of cameras are supported by Adobe by looking for profiles in:
C:\ProgramData\Adobe\CameraRaw\CameraProfiles
The lens profiles are in:
C:\ProgramData\Adobe\CameraRaw\LensProfiles
There are comparable directories on Win XP.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Camera Raw 4.5 with Olympus 420

Using the 4.5 DNG converter with E420 ORF files is resulting in a doubling of file size. A typical ORF is about 9.3 Mb after conversion the DNG is between 18 and 20 Mb depending on whether compression or encapsulation of the raw file are turned on. Is this right ? I thought typically the DNG was slightly smaller than the original raw file.

Hi Eric
I have tried both ways, also with and without compression and with and without a JPEG. Still get a file of 18 - 20 Mb. Tried 4.5 with an E1 file - both the ORF and the DNG are about the same. I am beginning to wonder if the E420 ORF is compressed as it is only about 1Mb bigger than the E1 file yet nearly twice as many pixels.

Adobe Camera RAW and Lightroom?

Can I use Adobe Camera RAW in conjunction with Lightroom?

LR can send an image (or images) from LR to Photoshop by rendering them in ACR.
Sure, it can subcontract the job and passing images to HDR within PS is an Adobe-scripted example of that. However it is AFAICT an arbitrary design decision, that it must be ACR which performs the conversion in these interactions; rather than (as various third-party utilities already do) getting LR to do this part via external files.
IOW, it is only on the basis that ACR is now expected to do, what we already know LR has the ability to do, that version incompatibility arises as a problem.
Let me explain: say I want to blend bracketed exposures together. I have a current version of LR but an older version of PS. The "Edit in.." options are therefore constrained; I cannot, as I could have done with say LR3.x and the same PS version, pass a bunch of images directly.
However, I do have the LR "plugin" (potentially misleading terminology IMO) LR/Enfuse installed. This lets me seamlessly select a bunch of images, interact with external processing which merges these into a single new image (in this case the interaction precedes the making of the rendered copies, but this could be in another order), and then view a resulting image auto-imported into the right place in my LR Catalog; and know that the extra intermediate files which this process requires (as the PS method does not) have been deleted for me.
This is functionally different but in its outcome, equivalent to what using Photomerge would have got me. The difference is that ACR incompatibility has been simply circumvented.
Might there not be an argument (inducements to upgrade PS for other reasons left aside) for Adobe facilitating the use of otherwise perfectly usable older PS versions together with LR, by this kind of route? Harnessing the two horses to the wagon separately, rather than under a single yoke? Providing a scripted "pass multiple images into Photoshop" LR export-based plugin, akin to what LR/Enfuse does?
I suspect there will be a lot of people who in the past have upgraded PS infrequently, and not planning to upgrade every single version going forward, who are currently re-considering their position about PS in view of the announced change of upgrade qualification.
Lightroom only gets stronger the more ways you can use it with other software, and while a "forced" upgrade of PS merely due to ACR considerations may be tolerated when ACR is central to your workflow, this is more likely to be resented when it is LR which is central, and the ACR question intrudes only peripherally. In that case people may settle unhappily for some clunky workaround (toward which Adobe have simply been unhelpful, in their insistence on ACR parity as the sole solution).

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

How to change preference setting in Photoshop CC 2014 to not automatically lauch Adobe Camera Raw when opening Nikon raw .NEF file

When I launch Photoshop CC 2014 and then open a .nef raw file it launches Adobe Camera Raw and I click Open Image, then I "Convert to Smart Object" then launch Filter > Camera Raw Filter. Is there a preference somewhere for raw files that just bring you right into Adobe Photoshop without stopping at Camera Raw first? Thanks!

Gene,
Ah! Okay, makes sense now. I just learned tonight that some features are not available when using Camera Raw as a Smart Filter. One being Lens Profile Correction. So it makes sense to have have Camera Raw open right off the bat to make some tweaks first then continue on. I found the below on the Adobe website. Thank you so much!!
Note: The following features are not available when using Camera Raw as a Smart Filter (that are normally available in Camera Raw), primarily because they don’t make sense in the filter context: Workflow options and preferences, crop and straighten tools, rotation tools (rotate left/right buttons), snapshots, camera and lens profile corrections.

When will adobe camera RAW be available to work with Pentax K-3 in elements 11?

Hi - I am running Photoshop Elements 11 and shooting with a Pentax K-3.
When in college I am able to open the PEF files and make adjustments in Adobe Camera RAW, however, when I am using elements 11 at home I get a message saying that my Camera is not supported.
Obviously I would like to be able to make some adjustments outside of college to speed things up a little.
I don't really want to go to the pay monthly Photoshop as I already have Elements11 and Lightroom!
Is there any other way that I can get camera raw? I have the Pentax Silkipix software but it's not as user friendly as Camera raw.
Is Adobe camera raw available to buy as stand alone software? Are there any plans to support k-3 PEF raw files in elements any time soon?
Any help gratefully received.

Hi,
To read the PEF files from the K-3 you need camera raw 8.3 but that is not compatible with PSE 11.
You would either need to upgrade to a later version of PSE or download the Adobe DNG converter. You can then convert the PEF files to DNG files and the DNG files could then be edited by PSE 11.
It looks as though the K-3 can be set to save the images in DNG format. Have you tried switching to that format? The files should then be able to be read by both systems.
Brian

Why are no Pentax lenses in the Adobe Camera Raw lens profiles when processing JPG files?

I normally shoot and process raw files and use the latest version of Adobe Camera Raw for processing. Some of these files are converted to jpg for use on the net or e-mailing etc. Sometimes I want to make minor changes to the now converted jpg file and often go to Adobe Camera Raw for ease and speed of use. Lately I have gone back to some files that were not thoroughly processed as raw files before conversion to jpg. When, in ACR, I go to Lens Corrections panel, Profile tab, I Enable Lens Profile Corrections and choose Setup: Auto (or Default) and get the message, "Unable to locate a matching lens profile automatically".
I then go down to Lens Profile and click on Make with the intention of choosing the Pentax lens which I used for the photo. Here is the problem - there are only six choices under make, namely Apple, Canon, Nikon, Sigma, Sony and Tamron. I have no such issues when processing a raw file in Adobe Camera Raw. Pentax lenses are automatically detected and Pentax, along with Leica, Samsung, Zeiss, etc. are choices under Make of lens.
Do other people have this problem? Is there some setting I have missed? Is Adobe just not permitting some makers' lenses, for which there are profiles, to be corrected if the files are jpgs?
BTW, I have checked and the same issues exist for tiff files opened in ACR.

Assuming I read your post correctly, and that you're trying to use Lens corrections on JPEGs and TIFFs... I believe there's a completely different set of profiles for correcting already "developed" images (such as JPEGs and TIFFs). If I recall correctly (and it's been a while since I read about this), it's the same set that's used inside Photoshop for the Filter - Lens Correction tool (I hope someone here will correct me if I'm wrong, but I'm sure I read this somewhere).
If your lenses are known to Camera Raw when you develop raw files, I suggest you will need to go all the way back to your Raw file and reprocess it from that stage. You'll get a better result anyway.
-Noel

Adobe Camera Raw ACR crashes instantly when hitting accent key

I just lost several hours of work because ACR 8 with PS CC2014 crashes every time you hit the accent key ´ which is under to the Volume up and down keys on a German keyboard.
An error message says: "The command could not be completed because of a program error." See screenshot.
Is that a known bug?
Thank you
Marco
BTW: The ACR interface looks like it's from the nineties. How long will Adobe drag this through upgrades?

MPPhoto wrote:
…I am not talking about any dialog boxes here…
…<sigh !>…
Yes you are, Marco.
The Adobe Camera RAW window is a modal dialog box. All its tabs are modal dialog boxes.
All dialog boxes MUST close when the Escape key is pressed, or a key that somehow acts somewhat like the Escape key is pressed.
You cannot get around that, Marco. Sorry if that irritates you, but that is reality.
All we do here is try to help people and offer workarounds.
If you're prone to hitting that key too often accidentally, perhaps the workaround would be for you to disable it, either by re-mapping the offending software keyboard layout, or by physically removing or otherwise disabling it in your hardware keyboard.
If the Adobe Camera Raw Team determines it is an Apple OS bug in the mapping of that key on a German keyboard, I can guarantee you that it will be quite a while before Apple fixes that.
I am now assuming you're on a Mac because of the interface shown in your screen shot.
I understand you are frustrated, and I feel for you for having lost many hours of work for a momentary gesture of inattention, but so far you have not given any details whatsoever about your setup.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6" or "CC2014", but something like CS6v.13.0.6, or CC2014 v 15.0.x) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
MORE BOILERPLATE TEXT, extracted from another FAQ:
https://forums.adobe.com/thread/375816?tstart=0
Do not be abusive or aggressive in your tone
An aggressive, demanding, accusatory or abusive sounding post will often evoke an aggressive or abusive and unhelpful reply.
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
Thanks!

When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?

Hello Adobe,
When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?
Best regards
Frank

There won't be an update for Lightroom 4. The only way you can work with your D750 raw files is to use the free standalone DNG converter to create DNG copies. If you want to be able to work on the NEF files then you will have to upgrade to Lightroom 5. Lightroom does not use the Camera Raw plug-in. Everything is part of the Lightroom program. If you want to stay current with Lightroom then you need to follow the update/upgrade path. That means purchasing each new major version of Lightroom or subscribing to the creative cloud plan.

When will Adobe Camera Raw support the new Nikon D3S?

Just putting my friendly nudge in

You could check in the Adobe Camera Raw forum.
Camera Raw forum.
(Nudge nudge, wink wink.)

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Opening tiff photos in Adobe Camera Raw

I can not open my tiff files / photos in Adobe Camera Raw. I am using CS6 that has been completely updated with all the current updates. I go to Bridge, highlight a tiff thumbnail photo and go up the file drop down menu. The open in raw selection is grayed out and I can not select it. It works fine with jpeg files, and I can open raw files without problems. It just won't work with tiff files. I have gone to preferences and selected the option to open all supported tiff flles but this did not work either.
I have uninstalled Photoshop and Bridge and reinstalled it and updated it all again and it still will not let me open tiff files in Camera Raw.
Any ideas?

I am more apt to beleive the issue is with the tif files themselves. Not all tif files are equal. It depends on the compression, bit mode and so forth. Can the tiff files be opened in photoshop? if so, then that just maybe the problem. if not, then the file itself maybe corrupt. But I am leaning towards the settings used when saving the file.

New update 8.7.1 CS6 ACR not working---(I own hard copy not a Trial or part of CC), I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In requir

I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.

When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
Also this is a user forum not a Adobe Customer Services web site.

When is disponible Adobe Camrera Raw 6.7 with Olympus E-M5 support?

Similar Messages

Maybe you are looking for