When is going to be released official new bios for k9a platinum

Hi,
as I write in topic, when is going to be released new bios for k9a platinum?
thanks

 That is a Kuma CPU and as such it is not and probably will not be supprted on your older MB.
 Here is a list of MBs that support 7550 Kuma, 7750 it appears like is too new to be on any MSI MB CPU support list yet however it it should be supported on them as well.
K9A2 CF, K9AGM3-F, K9A2 Neo-F
K9N2GM-F V2, K9N2 SLI Platinum / K9N2 Zilent, K9N2G Neo
K9A2GM V3, KA790GX, KA780G-M
KA790GX-M, KA780GM-M, KA780GM
K9A Platinum >> CPU support << list

Similar Messages

  • Cannnot flash new bios on K9A platinum

    i been trying to flash the 1.2 bios over the 1.1 i have on my motherboard using the msi utility in windows but the only thing that happens is that the system just hangs and then i have to reboot. any ideas? thats the only problem thats puzzling me otherwise its an amazing board

    Quote from: XanaduServers on 08-November-06, 05:09:52
    Create a bootable CD and do it.
    I didn't have to use a RAM Drive.  I used a single floppy (brand new), boot disked it and copied over the flash.
    I have tried with a booable cd, but that did'nt work either. Did you flash from the floppy? I have never used that flashtool so I might have done it wrong. I just followed the steps in the word doc that came along with the bios files.
    Quote from: VTwedge on 08-November-06, 06:28:32
    got my board 4 days ago from scan.co.uk...there was a website that said the board they were testing had the x wing logo on it too hmmm. bought it from scan.co.uk
    Ok, then it's most likley the same board as I got. Strange tough, that the pictres are different. On the box its a picture of an X-Ving tough.

  • When are you planning to release a new firmware fo...

    When are you planning to release a new firmware for the N95 NAM?
    I am tired of waiting for the automatic screen rotation on the N95NAM. This feature is aleady available in the european version.
    I switched from an iPhone to this nokia, and now i have second thoughts. Nokia seems to be the same as apple.
    Do you guys know anything about a new firmware?

    No one from Apple will respond. We're all just fellow users here. And all that Apple has announced thus far can be found in the press release:
    http://www.apple.com/pr/library/2012/03/07Apple-Launches-New-iPad.html
    Beyond that, no one here knows anything about future release dates.
    Regards.

  • I need a new Bios for the MSI k7n2 L!!!!!!!!

    I need a new bios for the MSI k7n2 L, because i need more voltage for the MIcroprocesor and more voltage for the DDR.
    Anybody know if exist some bios BETA or something,
    And when MSI will release the New bios for this mother?
    Thank for respond
    Sory for my english
    N7.net | SebaS

    I hope you find one...(doubtlfully tho)....alot of people would like to have what you asked for......
    One question why do you feel you need more voltages?
    Is the system unstable?..........or do you just want to overclock more?

  • When is going to be released office 2013 for mac?

    When is going to be released office 2013 for mac?

    ginus wrote:
    When is going to be released office 2013 for mac?
    Why do you think anyone here would know? 

  • When will a new BIOS for K7N2G-LISR be released

    Anyone have any idea when a new BIOS for the K7N2G-LISR will be released or if a new beta bios is available :D

    I have a BIOS bug for MSI.
    I can't disable the tv-out function.  Therefore I can't watch any DVD's.  I have to take out my G3 to enable me to adjust the onboard GFX settings and there is no option to disable tv-out as described in the manual.
    I have emailed MSI and their tech support are either extremely busy or completely useless like their software.
    This is completely driving me up the fecking wall!!!
    I love MSI hardware but I have to avoid any MSI software like the plague... unfortunately the BIOS is unavoidable.
    MSI, please sort this or I will be forced to return my hardware and look for another brand.  I'm considering ABIT so be warned.
    Could we draw up a list of bugs to give to MSI so we can try and get them sorted?
    Sorry for the ranting, but theres not much I can do.  :(
    L8rz

  • When i update the ios 8.2 new apps for apple watch i dont have

    When i update the ios 8.2 new apps for apple watch i dont have.please advice

    It was the first thing mentioned in the update description that came up before you chose to click 'Accept'. iOS8.2
    You accepted, therefore you have it. Simply put it at the end of your Apps as I have done with Apps I did not want e.g.. Health, Tips, Compass etc.
    Pete

  • New Bios for K7T266 Pro2-RU

    Hi All,
    Are there any new bios' for the K7T266 PRO2-RU (i.e., above 3.7), that will support the AMD 2200+, 2400+ Processors once the Modification is done?
    Thanks.
    Craig

    Hi,
    The K7T266pro2 (MS-6380 V2.0) needs the modification to support all the latest 266FSB (TBred) CPU's because there is a timing change, removing the capicitor solves this and allows you to get the CPU starting.
    MSI's official statement is that they don't support this as the board is long out of production.
    However, they where nice enough to give us the modification in order to give you the posibility to get it running.
    They're plan was to stop releasing BIOS'ses at v3.60 because there was no need to release another.
    I convinced them to release 3.70 that has updated CPU-ID code for all 266FSB CPU's, and no again, they still don't support any CPU over the fastest Palomino officialy.
    What they did was giving us the posibility to use an outdated board a bit longer, be happy about that.
    As for the testing of CPU's on this board, that stopped at BIOS 3.50...
    Any given board will fade away at some point in time, thanks to MSI (unofficialy), the K7T266pro2 with the modification can be used a bit longer......
    All you need for the right multiplier is leave it at auto....as the correct one is hardcoded on the CPU itself...

  • New bios for kt4?

    new bios for kt4?when will a new bios be released.

    I think only MSI knows, and since MSI doesn't visit these Forums as they are user maintained u won't get any answer. But they usually update their BIOS'es on an monthly basis.-

  • New Bios For MSI K8N Neo Platinum [ 1.55]

    NEW BIOS FOR MSI K8N Neo Platinum !!!!
    BIOS 1.55 FOR K8N
    AND CLICK
    Apothikeusi/Emfanisi (Greek Language )
    Your CPU temperature is in the safe range. Please rest assured. If you are
    willing to, would you please flash BIOS to the version 1.55 verifying? We
    send it by attachment. As to how to flash BIOS, please refer to the word file
    in the attached file. Please kindly inform us of the results. Thanks for your
    cooperation.
    In addition, please enter BIOS to load optimized defaults after flashing BIOS.
    Please feel free to let us know if you still have any further issues or inquiries.
    Best regards,
    MSI Technical Support

    OMG !!!!
    Something is really weird about this bios !!!!
    I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
    Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
    OMG OMG....
    If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
    Really strange guys.I thought 230 was my memory limit....
    Gonna try higher and let you know.
    P.S. this bios seems to like Kinston Ram....Value at least  

  • New BIOS for Diamond Plus any problem noted yet.

    Anybody using the new BIOS for the Diamond Plus Version 3.09 BIOS.
    I have got it installed and upgrade went will, but be ready for changes.  Go over you BIOS Setting each and every parameter, because they have changed a lot of the defaults, like all Network controllers are disabled by default.  The have made changes to the Hyper Transport Defaults setting they are what they should have been in the first place.
    Marvel Yukon network controller drivers of old will not will not load and MSI USA download for the driver is off line. Tw site is not down but not taking new requests for the drive because of traffic load.  Old nVidia network drives loaded after I enabled on board LAN on in the BIOS.
    That, all I have checked out so far, Oh yes the changes in Memory BIOS setting, but have not been able to check all of the out.  If some one with experience with memory BIOS settings could check them out and give report back it would be helpful.
    We asked for it now we got it, for better or worse.
    Roger
    When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings.  It is almost impossible to estimate what your problem is without knowing something about it. Here is the link to the web site.

    Quote from: NoBS on 22-March-06, 21:40:24
    Wow, funny how 2 gigs still needs a paging file with a standard desk top!
    Of course, even funnier just how fast 2 gigs can be eat'n up with 3d rendering and audio/video encoding!
    Just blowing my mind, remember when 32meg RAM was considered over kill?
    Ah those 3.1 days 
    that's not a bios issue it is a xp home and xp pro 32 bit issue.
    if you want 4 gigs you need a 64 bit OS like server 2003 or xp pro 64 bit.
    Yes it will run in dual channel but due to limitations you will have it run in ddr 333 *UNLESS* you have single sided 1 gig sticks.
    Even with 4 gigs you will see slightly less than 4 gigs in bios, as a portion is Used there. once in windows you will see the full 4 gigs.
    btw I am on my old P4 3.0e prescott as i sent in my two 7800gt's for the step up program.
    They should be here by the 31st.
    For what it is worth I have had 4 gigs working on this mb and cpu using ms's free dl of their 64 bit os.
    It took me for ever to figure out why i was only getting 333 ddr and 3.5 gigs. this was 18 months ago.
    When i ran a dual boot of the xp hom and xp 64 with 4 gigs, i did not see the support from my prefered software vendors.  So i sent back 2 gigs, and stuck with xp home. Now that i have the new amd i stepped up to xp pro 64 bit and love it.

  • New Bios for MSI 6850 OC

    are interested me when will come a new bios for 6850 oć version.
    because it has a problem with my memory and in some games we put out a black screen.
    I tried everything and found a problem in the VRAM
    because when I close the speed VRAM card I was more stable
    this problem have gigabyte 6850 so they fix this problem with new bios
    so anyone have information on when they will launch a new MSI bios to 6850 OC
    sorry for my bad english I am from Serbia

    Quote from: Svet on 16-January-11, 09:55:21
    you can ask msi here: http://support.msi.com/ if there is a such
    I explain to them my problem but we have not yet responded

  • Need new bios for r9 270x

    Hi, I would like to request a new bios for my 270x
    S/N 602-V303-070B1404003989

    where is it located on the card? I cant find the current version in windows because my screen doesn't display because the card doesn't work... I think its  v303 ver:1.1

  • I am looking for new BIOS for HDD STORE TV

    I have multi HDD STORE TV, but I am not satisfied it, because it supports very very limited number of formats.
    Unfortunately does not read MKV and many other formats.
    May be at somebody have new BIOS for it or from another HDD compatible that reads more formats?
    I will be very grateful.

    >May be at somebody have new BIOS for it or from another HDD compatible that reads more formats?
    If something like that would be available, then you would find this on the Toshiba European driver page in the download area.
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    Choosing Options -> Drive Devices -> Multimedia HDD -> 3.5 StorE TV you would get the software related to this option part but as I can see there are no updates for this time

  • When I try to sign in with new password for apple, I constantly get "session timed out"

    When I try to sign in with a new password for IPhone, I constantly get "session timed out" and I am asked to try again and it does the same

    sounds like your connection to the internet has failed.

Maybe you are looking for

  • Replicate CRM z-fields of BP to ECC

    Hi experts, We're having a requirement of adding z-fields in CRM BP (for delivering plants in ECC) and transferring these fields to ECC customer master data (KNVV). Can anybody who have achieved this before provide a suggestion? Thanks Shane

  • BADI for Changing STANDARD Dcoumentation " HELP Button in MIGO Transaction

    Hi Friends,                  I have a requirement in MIGO Transaction,I have to change the standard help documentation if  presses HELP Button and  I have to place my Help Documents. Is there any BADI or User Exit or SPRO Settings or Any Class...? Th

  • "unknown software exception (0x40000015)" on CC update.  What happened?

    I have no idea when in the update process it failed. An information window was on the screen when I returned to the computer. It gives an exception number (0x40000015) and a location: 0x001e54a0. And an "OK" button to terminate the application. How c

  • PPT switcher- how to embed mpeg files in a Keynote presentation?

    I used to take short mpeg files and embed them so they would run on a slide while I talked- it seems I can only attach iLife files. Does this mean I have to import all the mpegs into iMovie and convert them into "sharable" formats to make them usable

  • Want to download music and sound from YouTube?

    I had used Dirpy to download music and other sounds from YouTube for my personal use only in FCE, so when Dirpy bought the farm this week, I went in search of an alternative. A lot of searching brought up sites that wanted me to download something -