When is Grid Control 11 due out ???? Let me see if I have this right......
I have to install GC 10.2.0.1 (which uses an Oracle 10.1 database).
Then I have to upgrade the Oracle DB to 10.2.0.3, by first installing a new 10.2.0.1 ORACLE_HOME and applying the 10.2.0.3 patchset.
Then I have to apply the Grid Control 10.2.0.4 patchset.
If I wait for the next release for Grid Control (11), how long will I have to wait?
Another question. Can I install the 10.2.0.3 DB, then install Grid Control into an existing database and then run the grid control 10.2.0.4 patchset? What's the best approach?
You can precreate a 10.2.0.3 database and then when you install GC, just choose the option to install on an exsiting database.
Then patch GC to 10.2.0.4...
No idea about 11g
Similar Messages
-
Let me see if i got this right......
From what i've read on these forums i came to the conclusion that the CPU idle whine is a software problem whilst the power inverter (lcd brightness) whine is a hardware problem. Is this correct?
The "CPU whine" has been described as stopping when certain software is running, i.e., changing processor load, but not really a software problem. The load buzz heard related to display brightness can be a sign of a bad display inverter board.
-
ORA-01017 Error when installing Grid Control 10.2.0.3
Hello all,
I have the following problem: I am installing the Grid Control on a Linux machine and when I get to the "Specify Repository Database Configuration" step and enter the SYS password I get an ORA-01017 error. I still can connect under SQLPLUS with the same pwd as SYSDBA.
Any clue how to get ride of this will be very appreciated.
Best regards.
AskiaYes this is what I do, but still receive "Insufficient privileges to write to that location". So I am forced to use normal file system to be able to continue.
After that I run into the current problem saying OMS configuration failed (see details....) and I try:
./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=uxlpgrid01:6200
3 of 5 processes started.
ias-instance id=EnterpriseManager0.uxlpgrid01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
ias-component/process-type/process-set:
OC4J/OC4J_EMPROV/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
Then:
./opmnctl status
Processes in Instance: EnterpriseManager0.uxlpgrid01
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 23861 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 27021 | Alive
OC4J | home | N/A | Down
OC4J | OC4J_EM | 10403 | Alive
OC4J | OC4J_EMPROV | N/A | Down
WebCache | WebCache | 23872 | Alive
WebCache | WebCacheAdmin | 23863 | Alive
Overwhelming :-(
Thanks for helping
Askia. -
Why do my Boolean control get a different display when I the controls grayed out?
I have some Boolean control in a cluster which I grayed out programmatically. If I do that this control's get grey as expected. But if I do that with Boolean which are grouped in a decoration field then the control become a blue style. How can I change the grayed out color?
Solved!
Go to Solution.Hi Gerd,
attached a VI with this behavior. The Boolean are on page Battery Test and they are called Save Test and Load Test.
Attachments:
grayed out example.vi 34 KB -
hello i have the new ipad 32GB as times when on the internet on safari the screen goes blank and drops out does anyone else have this problem
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Why does the contrast in my images processed in Aperture look markedly different when opened in CS4? The images look fab on the screen in Aperture - even if these are then opened in CS4 from Aperture they look different - much flatter. This is a new issue. I am a wedding photographer and an album processed in Aperture has been sent back by my wedding album printer saying the images all lack contrast! Can anybody shed any light on this! I have checked colour spacing etc!
I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3 -
When I Consolidate I Get A Message Saying I Don't Have Access Rights
I just got a Macbook and I have music and video files on my old PC on both my hard drive and an old external hard drive (formatted NTFS). I am trying to consolidate all my videos and files to a new, larger and slimmer external hard drive (formatted FAT 32) so I can set up iTunes on my Macbook and start using that computer but while keeping the metadata in my songs (playcounts, ratings, etc.). I've followed the steps to set the default iTunes location on the new hard drive and began the consolidation process. It was working fine and about 2 GBs were consolidated into the new hard drive but then a message popped up saying that copying music failed because I don't have enough access privileges for this operation. Now I'm the only user on my PC and have admin rights assigned to me, so I'm not sure how this is possible.
If anyone could help me with this error message, I would be much appreciative. I'm ready to get rid of this old PC junker and start using my Macbook!I was finally able to solve my problem and thought I'd post it here in case anyone else comes across this. A few years back, my hard drive crashed. I was able to recover my music files but I basically had to reinstall XP. When I did that, the music files that I saved were encrypted and "owned" by my old username. Since this username and permission file associated with it were now gone, any other user, including the admin or a username set up with the same username as the old one, could not unencrypt the folders with the music in it. So what I did was I opened Windows Explorer, navigated to my music folder, and found every artist folder that showed up in green on the screen, which indicates that the folder or file is encrypted. For every green folder, I created a temporarily created a new folder in my iTunes music folder with a similar name and copied the files from the encrypted folder into the new temporary folder. Then I deleted the encrypted folder and renamed the new folder the name of the just-deleted folder. Changing the name back to the just-deleted folder tricks iTunes into thinking nothing has happened with the files. Here's a little more detailed example:
1) I opened Windows Explorer and saw that my "Black Crowes" folder was showing up in green, meaning that it was encrypted.
2) I closed iTunes.
3) I created a new folder in my iTunes music folder called "Black Crowes2". When I hit refresh in Windows Explorer it should should show "Black Crowes" and "Black Crowes2" right next to each other.
4) I moved all the files from "Black Crowes" into "Black Crowes2"
5) I deleted the empty "Black Crowes" folder.
6) I renamed the "Black Crowes2" folder to "Black Crowes"
7) Finally, I opened iTunes and consolidate. I was able to consolidate the Black Crowes folder as it is no longer encrypted and iTunes is tricked into thinking nothing has happened to the files.
Of course, before you try all this you may want to try to make sure you use every username that is on your PC to see if that's the username that's associated with the encryption. You'll know that's the username that encrypted the files because the encryption box in the properties of the folder isn't grayed out (properties->general tab->click advanced. -
Since updating to IOS 7.0.2 my iPhone 5 regularly cuts out during phonecalls. Anyone else having this problem?
reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde -
When is Mountain lion due out?
Does anyone know when OS Mountain LIon is due to be released? All I can find is July. Anything more specific?
July is a 31 day month so it could be anytime from now
until July 31, 11:59:59 PM.
Last year, Lion was released the day after the quarterly
earnings report call. FWIW, that is July 24 this year. -
When is New Udate due out?
Anyone know the date?
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and if it's a technical question in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards. -
Let's see who can figure this out =]
Okay,
I have a broken ipod 4G 20GB model. It displays a sick icon. It will not go into diagnostics mode. It is not seen by itunes or my PC (windows xp OS). When it is plugged in the charge icon shows up, but it does not move.
So basically I can't do anything to it with my computer or with the buttons on the ipod, so I think I will have to take it apart to fix it, as I'm not going to send it back as the warranty is over.
I don't mind erasing everything on it, and I would if I knew how to, and I will try just about anything so I can make it atleast an external hard drive.
If anyone knows what I should do once I take it apart, what part is most likely wrong with it, if they know some way to fix it, or have any questions... please post =].
Thanks for your help.I have fixed it!!!
I was in the middle of prying open the case and the Ipod flew out of my hands and landed on the concrete floor, and then I looked at it and it had turned on. The hard drive was humming but I turned it on and off and it fixed.
If your ipod is broken just smash it on the floor... Apple add that onto your repair checks =D. (I'm not responsible if it doesn't work for you)
Thanks for all of your replies (sarcasm ^^) -
When I try to play songs from itunes, I get an error message that my computer is not authorized. My songs have all played in the past. This is something new. I verified my computer is authorized, and when I try to re-enter the password, it tells me that I am already authorized. Makes no sense at all. It's an endless circle. Also, my shuffle will not sync due to access rights denied. I did nothing new, I always take the updates. My shuffle and compter are the same, no changes. Everything is verified in my itunes account. For some reason, it is blocking me from half of my music. Help!
It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
How to have OUT parameter for see if transaction have been posted correctly
I've a package procedure that reads data from a staging tables into their corresponding target tables. The below procedure variables are in the package specification and body. I need to create another procedure that ensures data has been sent to both target tables successfully.
If successful, commits the transaction. If not, ensures all matching records are deleted from target tables.
Outcome will have two possible values "success" or "failure."
Failure would indicate things such as transaction not found, transaction does not match from source to target tables.
However I need to create another procedure that reads the value of o_outcome parameter in the below procedure code such that if the parameter is a success then commit, and if failure has happened then delete all match records up until that point. I am using Oracle 11.2.0.2 and TOAD 10.5.1.3.
PROCEDURE edw_rex_pos_trans (p_begin_date IN DATE,
p_end_date IN DATE,
p_extract_type IN VARCHAR2,
o_outcome OUT VARCHAR2)
IS
v_extract_type edw_pos_extract_log.extract_type%TYPE
:= UPPER (p_extract_type);
v_begin_date edw_rex_head_extract.create_date%TYPE := p_begin_date;
v_end_date edw_rex_head_extract.create_date%TYPE := p_end_date;
v_log_seq_nbr edw_extract_log.log_seq_nbr%TYPE;
v_record_count edw_extract_log.record_count%TYPE := 0;
e_dates_must_match EXCEPTION;
e_begin_date_higher EXCEPTION;
l_tran_seq_nbr NUMBER;
CURSOR edw_rex_head (
v_begin_date DATE,
v_end_date DATE)
IS
SELECT *
FROM edw_rex_head_extract h
WHERE 1 = 1
AND TRUNC (h.create_date) BETWEEN v_begin_date AND v_end_date;
BEGIN
IF v_begin_date <> v_end_date
AND (v_extract_type = 'DAILY' OR v_extract_type = 'MANUAL')
THEN
RAISE e_dates_must_match;
ELSIF v_begin_date > v_end_date
THEN
RAISE e_begin_date_higher;
===========================================================
ELSE
SELECT edw_extract_log_seq.NEXTVAL INTO v_log_seq_nbr FROM DUAL;
DBMS_OUTPUT.PUT_LINE ('SELECTED next log_seq_nbr = ' || v_log_seq_nbr);
DBMS_OUTPUT.
PUT_LINE ('INSERTING record into bcf_pos_extract_log table');
edw_extract_log_table.insert_log_entry (v_log_seq_nbr,
'BCFPOS_TO_REX_EXTRACT',
v_extract_type,
v_begin_date,
v_end_date,
'STARTED',
'bcfpos_to_rex_extract');
DBMS_OUTPUT.PUT_LINE ('FINISHED creating log entry');
v_record_count := 0;
DBMS_OUTPUT. PUT_LINE ('SELECTING data and INSERTING it into REX tables');
FOR edw_rex_head_rec IN edw_rex_head (v_begin_date, v_end_date)
LOOP
v_record_count := v_record_count + 1;
SELECT navistor.kcpos_tran_seq.NEXTVAL@rex
INTO l_tran_seq_nbr
FROM DUAL;
BEGIN
INSERT INTO kcpos_tran_header (TRAN_SEQ_NBR,
ORG_NUMBER,
STORE_NUMBER,
TRAN_DATE,
TERMINAL_NUMBER,
TRAN_NUMBER,
TRAN_TIME,
BATCH_NUMBER,
BATCH_TYPE,
TRAN_TYPE)
VALUES (l_tran_seq_nbr,
1,
edw_rex_head_rec.store_number,
edw_rex_head_rec.tran_date,
edw_rex_head_rec.terminal_number,
edw_rex_head_rec.tran_number,
edw_rex_head_rec.tran_time,
edw_rex_head_rec.batch_number,
edw_rex_head_rec.batch_type,
edw_rex_head_rec.tran_type);
-- Table 2
INSERT INTO kcpos_tran_line (TRAN_SEQ_NBR,
TRAN_LINE_NBR,
ORG_NUMBER,
STORE_NUMBER,
TRAN_DATE,
TERMINAL_NUMBER,
TRAN_NUMBER,
TRAN_TIME,
TRAN_TYPE)
SELECT l_tran_seq_nbr,
tran_line_nbr,
1,
store_number,
tran_date,
terminal_number,
tran_number,
tran_time,
tran_type
FROM edw_rex_line_extract
WHERE 1 = 1
AND edw_rex_seq_nbr = edw_rex_head_rec.edw_rex_seq_nbr
AND revision_number = edw_rex_head_rec.revision_number
AND store_number = edw_rex_head_rec.store_number
AND tran_date = edw_rex_head_rec.tran_date
AND terminal_number = edw_rex_head_rec.terminal_number
AND tran_number = edw_rex_head_rec.tran_number
AND TRUNC (create_date) BETWEEN v_begin_date AND v_end_date;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.put_line (TO_CHAR (SQLCODE) || ' ' || SQLERRM);
l_error := TO_CHAR (SQLCODE) || ' ' || SUBSTR(SQLERRM,1,300);
v_record_count := v_record_count - 1;
END LOOP;
DBMS_OUTPUT.PUT_LINE('Total transactions inserted: ' || v_record_count);
DBMS_OUTPUT.PUT_LINE('UPDATING log table');
o_outcome := 'SUCCESS';
END IF;
EXCEPTION
WHEN e_dates_must_match THEN
o_outcome := 'FAILURE';
-- insert into error log table
WHEN e_begin_date_higher THEN
o_outcome := 'FAILURE';
-- insert into error log table
WHEN OTHERS THEN
DBMS_OUTPUT.put_line (TO_CHAR (SQLCODE) || ' ' || SQLERRM);
o_outcome := 'FAILURE';
--- insert into error log table
END;Barnes12 wrote:
I've a package procedure that reads data from a staging tables into their corresponding target tables. The below procedure variables are in the package specification and body. I need to create another procedure that ensures data has been sent to both target tables successfully.
If successful, commits the transaction. If not, ensures all matching records are deleted from target tables.
Outcome will have two possible values "success" or "failure."
Failure would indicate things such as transaction not found, transaction does not match from source to target tables.
However I need to create another procedure that reads the value of o_outcome parameter in the below procedure code such that if the parameter is a success then commit, and if failure has happened then delete all match records up until that point. I am using Oracle 11.2.0.2 and TOAD 10.5.1.3.Why do you wish to see if the Parameter is returned as SUCCESS?
Step 1: Load the data into Target Tables.
Step 2: Delete the data from Staging Tables.
Step 3: Verify if all the data is proper and there are no errors (Logical)
Step 4: If No errors, Commit the transaction.
Step 5: If any error, then Rollback the transaction.
Step 4, 5 ensures the data is either Inserted and Deleted or is untouched.
Thus, you can negate the need for another sub-program to verify it!!!
Regards,
P. -
Now I am tired of this Let's see anyone can solve this
Hi all,
I am having some serious trouble with JSP session. And i posted the problem but didn't find any solution.
Now i am posting my code.
The SITUATION IS: i am couple of JSP pages and THEY ARE NOT ALL LINKED TOGETHER. meaning that two of them is linked with sending data to another but the rest of them are just in one application but not connected. BUT in every page there is a separate link for all other pages AND this is not HTML FORM.
Select_Database.JSP
<!--Setting sessions-->
<%
String uname=request.getParameter("uname");
String pass=request.getParameter("passw");
session.setAttribute("user",uname);
%>
<!--Setting sessions-->Update_Para.JSP
para_id=Integer.parseInt(category);
String username="";
username=(String)session.getAttribute("user");
//my new code
//File afile = new File(path);
BufferedWriter one = new BufferedWriter(new FileWriter(para_path));
one.write(para_data);
one.close();
out.println("<ul class='bullet'>");
out.println("<li><b>Successful Update</b></li><br>");
out.println("<br>");
out.println("</ul>");LogOff.JSP
<% session.invalidate(); %>
Here are three JSP pages pardon me i got rid of all the webdesign HTML codes for easy understanding.
Now on the select _database.JSP file i am getting the user name and setting in sessions.
Just reminding you all the pages got
<%@page language="java" session="true" %>this on top.
Now after i set the login name as a session value there is no connection between this page and any other page except the HREF links i mentioned above.
On the Update_Para.JSP page as you can see i used that session variable. when they click LOGOFF HREF they are taken to the logoff.JSP and they are the session is killed.
Now on the logoff.jsp page after loggin of if they click login again then they are taken to the login page and they login with a different id and when they goto Update_Para to update paragraph the user stored in JSP as the user logged in when the session was created two weeks ago meaning that that session is still alive after two weeks.
Now i described the problem clearly here, Can anyone please tell me what is the problem. ThanksThis may be caching on the user's browser. The user's browser may hold onto older web pages to make display quicker. This is usually only done for pages that are visited with normal links, rather than forms. The browser will look to see if the page has an expiration data, and then re-query the server if that expiration date has passed. Otherwise it will hold the same page in a cache on your hard-disk and display it from there when requested.
You can try to solve this by forcing your page to expire as soon as it is created. See the following link:
http://www.jguru.com/faq/view.jsp?EID=377 -
Serious issue here. I have no idea what is going on. It will not let me download even a free app. Anyone know how to correct this?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
RNIF Error - BAD HTTP RESPONSE CODE RECEIVED: HTTP/1.1 500 Internal Server
Hi, I am trying to do a scenario on RNIF. While testing, we trigger the PIP from STK, But we are getting the error as BAD HTTP RESPONSE CODE RECEIVED. Java Exception com.rosettanet.rnstt.outbound.RosettanetException: BAD HTTP RESPONSE CODE RECEIV
-
How do I add people to a " Reminders List " in Mavercks?
How do I share a " Reminders List " ? I dont see the broadcast icon anymore in Mavericks.
-
Error: undefined; OffendingCommand: PK while converting to pdf
Author: Devkia [ Fri Apr 09, 2010 03:33 PM ] Post subject: Need Help With Adobe Distiller 9 Hello Everyone, My Challenge : ======= I am using licensed version of Acrobat Distiller 9 for testing. The logic converts the Excel to ps file and then ps fil
-
I deleted my Itunes on accident.
I have OS 10.5.8 on my Imac and cant download the new itunes because it needs 10.6.8 or better. PLEASE HELP IM LOST WITHOUT MY TUNES
-
What is the BI Content version relese for bi 7
hai expert's, we are planning to install BI Content for version BI 7.0. so what is the version release for bi content in bi 7.0. as like bw 3.5. In bw 3.5 the version for bi content release is 353, level is 0010. so please tell me the version release