When is it best to sharpen an image?

I'm a little confused about when is the best time to sharpen your image. I shoot RAW, do some global editing in ACR 6, local editing & manipulation in Photoshop CS5 and then print.
I have heard that its best to sharpen your image as a RAW file in ACR 6, before going into PS for editing and then printing.
I have also heard that its best to wait and sharpen your image in PS after all editing has been completed and the image has been sized for printing.
Which is better, or are both? Thanks.

Both are necessary steps: Capture Sharpening and Output Sharpening. The latter has different modalities that are dependent on the resolution of the image and the output media: web, inkjet, contone…
Look into PhotoKit Sharpener by PixelGenius. Just reading the blurb or a review of the set of plug-ins will make a bunch of things clear to you.
Wo Tai Lao Le
我太老了

Similar Messages

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Best way to manage images on jsp web application

Hi,
Am developing a jsp web application, in that project, the user will upload the image files, now I created an image directory in the context root and when the image is uploaded by the user it is saved in the /images directory and the image path is saved in the database. I can display this image using the <img src="images/a.jsp" > tag.
but when I rebuild the project all the images in the /images directory get deleated but the image path is remained in the database, is there any method that I make /image dir outside my project context root so that when I rebuild the project the /images dir can get changed and my project will save images outside the context root that is in the /images dir which is now outside the project context root. and is it possible to display those images using <img src""> tag. because this time my /images dir is at D:/images . what could be the best method or way to handle images with the web application.
any suggestion will be helpfull

Well my friend as per your given case there are to two ways of approaching your problem.
Case 1:
How to save the relevant data ??
.Create a backup folder Workstation on which you are hosting your application where you can store all the uploaded files which is outside the scope of webserver(However we can write a dedicated servlet which can access that file) and make sure we pickup from any the folder path from a specfic MessageResource bundle or an context/servlet init parameter in web.xml.
.Write a Upload servlet/Backing Bean which saves all the files in the discussed folder using utility packages like Commons FileUpload,Oreilly MultipartRequest & etc and then register saved fileName in the database user specfic table specific to user.
How to display the Image ??
.Write a dedicated servlet which can pickup user related fileName specfic information from the database and the read the file from backup folder by constructing the path from the entry made as a init param in web.xml or any other custom MessageResource bundle and then stream the Image data using the ServletOutputStream.
NOTE: do not forget to pickup & setImage file ContentType & Set the content length.
.Just try to render the JSP view file where we are displaying the displaying the images by calling the dedicated ImageServlet.
<img src="ImageServlet?userid=2345" align="center"/>Try to refer below posts to get a better understading.
Dedicated Image Servlet:
http://forum.java.sun.com/thread.jspa?threadID=5208858&messageID=9840042#9840042
Uploading Files Using Servlet:
http://muimi.com/j/jakarta/commons/fileupload/
Case 2
The second method would more or less the same but here we would save the uploaded file
content is saved in the Database as a Blob and we would retrive it back using a dedicated image servlet again.
However,in terms of performance the second case implementation is very costly.
Try to refer below posts to get a better understading on the second case.
http://forum.java.sun.com/thread.jspa?threadID=5193481&tstart=50
http://forum.java.sun.com/thread.jspa?threadID=5211649&messageID=9853670#9853670
Hope this might help :)
REGARDS,
RaHuL

Best practices for placing images in epubs

Okay, I've read the books, I've watched the tutes and I'm still at a loss on the best way to add images to InDesign 5.5 documents that I will convert to ePub. The images are created in Photoshop at 300 dpi and sized at 800by600. And yet when I place them in InDesign and create the ePub, the images display poorly in ADE and other readers. What is the magic formula for adding images to my ePubs?
Thanks in advance
Chris

Steve/Jongware:
My thanks for your responses.
Very good point to look at the images within the epub file. They are 72 dpi images, so it would seem that InDesign is indeed lowering the resolution. I had thought I tried every variation of the available settings within InDesign to avoid this but it would seem to not be the case. If you have any specific suggestions about what setting is causing this, that would be great.
Viewing the images in the target device is of course ideal. I'm creating this for a wide range of online bookstores, so what device it will be viewed on can't be known. Since ADE drives more than 50 devices, I had hoped that would at least prove to be a reliable base of some sort -- disappointing to hear that ADE can not be trusted in that regard. I had assumed I could proof the book in that before converting to mobi and proofing on a Kindle.
Why would anyone insert 300 dpi images, you ask? In its publishing guidelines, Amazon says: "To future-proof the content, save images in 300 dpi" Is this then bad advice on their part? Elizabeth Castro echoes this recommendation in her excellent book on the subject, by the way. It's rather difficult to know just what to do, I must admit. But I guess we're still in the early days of eBook creation, with best practices still being in a state of flux.
Once again, my thanks for sharing your experience.
Chris

What is the best way to place image (with caption) in a Book?

I am preparing a template for an Encyclopedia project, The Encyclopedia will be in more than 10000 pages, so what is the best way to place images (Photos, Graphs, illustration ...etc) with a caption?
The problem that when I modify text; the image don’t move with it, and when I place it within the text, it's difficult to control text flow.
Please Help

Thank you Peter,
it's a bit dificult to control anchored object -speacially in two colum text box- when placing image in one and half colum size, it wont move to first column.

Best way to store image? will be a lot of image files

I am working on a new project which involve user upload image to server and then do searching and view image. there will be a lot of image files. image will be displayed in web page as thumbnails, so there may be resized pic stored in server or resize on the fly.
What is the best way to store image like this? as files in file system? database? etc...?
Thank you very much

Hi,
When you are asking about the "best method for BDB", you should first read this: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am_conf/select.html
When you know exactly what are the differences between the BDB access methods, then you will be able to figure out which is the best method for your requirements or to ask a more specific question.
Regarding the second problem, you should read about isolation and degrees of isolation: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/transapp/inc.html
Regards,
Bogdan Coman

Firefox becomes really slow then eventually unresponsive when loading a page with many hires images. Unsual high memory usage up to 2gigs just for firefox. Was never a problem with v3.6.

When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.

I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy...

Firefox stops responding when trying to "save page" or "save image"

Windows 7 64 bit and Firefox 28. When trying to 'Save Page' or 'Save Image' the save dialogue window is nearly blank, then info bar shows 'not responding'. I have tried all the tips in the support pages. Resetting Firefox, Starting Firefox in 'Safe Mode'. Upgrading graphics driver to latest version. Turning off 'Hardware Acceleration' in options. Nothing resolves the problem. This issue has only recently started, the last time I tried saving an image it worked fine, certainly prior to Microsoft's most recent 'upgrade Tuesday'.
Edit:
Checked the save dates of the last images I successfully saved from within Firefox and compared them to my windows update log. The Microsoft March 'Update Tuesday' was installed on March 14th. My last successfully saved Firefox images were saved the following day on March 15th. Thus it is unlikely that the Firefox saving issue is a result of a Windows Update corruption. So the question is what changes have Mozilla made to Firefox between 15th and 24th March 2014 ???

I understand that finding a root cause is ideal, and I would be happy to further investigate this with you.
Since it is still happening in Safe Mode [https://support.mozilla.org/en-US/kb/troubleshoot-issues-with-plugins-fix-problems please try to troubleshoot the plugins and extensions]
The other route is to troubleshoot the downloads folder and antivirus to make sure the downloading of the image is not having an issue either. [http://mzl.la/LJ0h2w]
In the meantime there is an add on that enables this [https://addons.mozilla.org/en-US/firefox/addon/save-images/ Save Images]
Please post back with your results, there have been other reports, but no issue filed yet.

I am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image

I have been using lv_vfw.llb VI's for grabbing images from a CREATIVE WEB CAM ,i am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image ,i have been trying to play around with the RGB weightings but i am unable to get a color iamge,it shall be of great help if you could help me in doing this as it is urgent for me.Thanks for your help.

vicky,
I am unfamiliar with the lv_vfw.llb, and have not used it before. However, I noticed that you stated that you are able to grab in color, just not snap in color. If this is the case, why not just perform a grab and then extract a single buffer from this grabbed data, which would likely be in color? This seems like a possible solution to the issue that you are seeing.
Other than that, I really don't know enough about the lv_vfw.llb to be of much help on this issue. Hopefully another member of this forum will be able to assist you with this software.
Regards,
Jed R.
Applications Engineer
National Instruments

Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder... How can I fix this?
Please help me!

You don't need to recover the system.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
dot_clean -m
Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

I updated from Windows 8.0 to Windows 8.1 and ever since Firefox has run somewhat strangely. In particular when on sites with a lot of images like Facebook,etc

Hello, I am writing as I am experiencing some issues with my favorite web browser after updating to Windows 8.1. Here are some details. I updated from Windows 8.0 to Windows 8.1 and ever since Firefox has run somewhat strangely. In particular when on sites with a lot of images like Facebook. It is like there is some kind of Flikr effect between the desktop and the images and between the images and the browser (almost like old 16 bit video games flikering). It is not too bad but it is an issue. I have tried resetting firefox and restarting the computer. I haven't tried a repair, and I haven't done an uninstall yet.

thank you for helping, the issue seems to have been caused by the hardware accelerator

How can I create an icon that when clicked will open and maximize an image file?

How do I create a icon that when clicked will open and maximize an image file? I have tried to use the simple image widget with maximize upon tap/click - however I am can only size the image really small and put on the page. I'd prefer to have a graphic that when clicked it simply opens up the image. This is for a very simple question/answer book. The user is suppose to look at a picture and locate something. I want to put an 'Answer' graphic on the image and then the user can click the 'answer' graphic and it will open up the picture with the answer identified.
Is this possible?

Have yiu tried the PopOver widget? You can drop an image into it, maximise the image and the widgets window...But, you cannot get it full screen.
With iBooks Author, you either learn to use what is available within the app, or look online for third party widgets to purchase which suit your project.

Errors when trying to open up a disk image that has been comp. & encrypted.

I have an old 15” PowerBook G4 that I purchased back in 2004 that I wanted to backup the data on in preparation to sell it. The PowerBook has Leopard (Mac OS 10.5) installed on it. I used my Leopard installation DVD to boot the computer up and then launched disk utility (v. 11.0 (252)). I wanted to make a disk image (.dmg) of my entire “Macintosh HD” partition, so after unmounting the partition (otherwise you get a “resource busy” error message), I selected File -> New -> “Disk Image From...(<hard drive partition>)”. The next screen presented me with a name to type in for the saved disk image file and options to compress and encrypt (128 or 256 bit AES) the image. I could not get the image to begin creation when I had both compression and encryption set. I kept getting the error message “Unable to create (error -60007)”. So, I opted to create the disk image with just compression selected. This worked fine and I was able to select the image (let’s call it disk_image1) and perform an Image -> “Scan Image for Restore...” successfully as well as mount the image and open up files (the verification process took a long time before the image mounted, but it was successful).
Next, I moved the Firewire 800 external HD containing “disk_image1” to my new MacBook Pro (Snow Leopard installed) and opened up disk utility (v. 11.5.1 (298.1)). I was able to successfully mount the image and browse and open up files with this updated version of disk utility. I then attempted to convert the disk image I just created to a new disk image (let’s call it disk_image2) via Images -> “Convert...”. I selected “disk_image1” and then named the new image (disk_image2). I then selected compression and 128bit AES encryption, entered in a passphrase and started the process. Everything worked great in creating “disk_image2”, but when I tried to open up the image either in Finder or within disk utility, I got error messages. In disk utility, I got the message “Unable to attach “disk_image2.” (Authentication error).” and within Finder, I got “The following disk image couldn’t be opened” disk_image 2 (Authentication error). Note, I was never asked to provide the password I used to encrypt the image nor did I ever select to save it in my keychain. Just as a precautionary measure, I check my keychain and did not see the password for the encrypted image saved in there.
Is there a bug within disk utility with the way a compressed & encrypted image is created or a problem with the authentication process for an encrypted image?

I have not had this happen to me, but have read similar stories from people on these boards for years. I think saving an entire OS X boot disk to a disk image is asking for trouble. If anything goes wrong, one byte of data is copied incorrectly. it can render the entire image unmountable and all of the data in it inaccessible.
I'd use Disk Utility's Restore button (or a program like SuperDuper or Carbon Copy Cloner) to make a complete copy of the hard drive onto its own hard drive, skipping the disk image. If any bit of data gets dropped then only one file is affected, instead of the whole works. Do you have any other stuff on that external drive? If not, just erase it and try again, copying everything directly to the drive instead of to a disk image.

IDVD freezes when I try to burn a disk image.

I have a MacBook Pro and am running 10.4.8. I used IMovie HD 6.03 to make a movie from digital photographs with audio. I used IDVD to create a DVD. When I burned the disk using IDVD 6.03, the DVD was pixelated. I read in a thread in the discussion on IDVD that if I create a disk image and then burn it with Toast at a lower spped, you get a better result. I tried several rimes to create a disk image, It encodes fine through the menu, when it gets to encoding the movie, the program freezes. I have closed all other programs and turned off the airport. I also have over 30 Gb of memory. Any sugestions on what is causing this problem or how to fix it. I also tried creating the disk on a 13" MacBook - it also froze.
Thanks,
Steve

Thanks.
I actually read a post after mine that showed a lnk that says the same thing. I will give it time. I gues the reason I was concerned is that when I burned the DVD to using IDVD it did not take very long. However, when I tried to burn a disk image, I left it sit for 2 hours and it was stuck on encoding the audio. I will try again and let it sit.
Steve

When I have finished working on an image in Photoshop and I hit the save button it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found."

When I have finished working on an image in Photoshop and I hit the "save" button, it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found." I then have to go to "locate" to get the image. When I select the correct image, I get a message that it is not the same file name but I am eventually able to access the image. Needless to say this is having a negative impact on workflow!

The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help

When is it best to sharpen an image?

Similar Messages

Maybe you are looking for