When is new frame rate for HD projects?

Cyberbretheren...
Those working in film especially CGI stuff know that there's a new frame rate of 23.976. Any word on when Logic will add this option?
Pro Tools already has, nudge nudge wink wink....
A
G5 dual 2.5 Mac OS X (10.3.9) Stylus AND my original Minimoog. Lots of MOTU. No more Digi.

Yeah, "24 drop frame". I asked the Logic reps at last years' NAMM show if this was going to be added to the next version of Logic, but I got the ol' blank stare -- they had never heard of it! Hopefully by now they have. I agree, this new frame rate needs to be added. Glad you brought this up!

Similar Messages

Would you like to change the frame rate of the project to 30 to match to m

I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
Thus now I have a message asking what I noted above. Should I click CHANGE?
WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
Time for another snack. 8-(
-L
A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

AppleMan,
It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
-L

Best frame rates for 4 different cameras in multicam

Well, I've been flopping around in different threads on this forum, but I think the question is beginning to finally take shape for me. Basically it's all about deciding on frame rates for four different cameras I will be using to shoot a 6-day intensive course I will be teaching. The video will be primarily for computer viewing (YouTube, Quicktime movies). Here are the cameras:
2 new Canon cameras capable of frame rates of 60i, 30 frames per second progressive "recorded as 60i", and 24 frames per second progressive also "recorded as 60i" (there is a known issue with importing the 30 frames per second into fcpx, as fcpx does not recognize this as progressive, but ClipWrap can get around this).
1 Sony capable of 60i, 60P, and 24P
1 Sanyo capable of 60i and 30P
Possible settings:
Just do all at 60i, but people say this is not so good for computer viewing
Canon at 30 fps (using ClipWrap to see it gets recognized as progressive), and the Sony and Sanyo at 60i. Will this cause syncing or other problems, mixing frame rates like this? How bad a hit in quality is 60i on computer screens?
Canon and Sanyo at 30 fps, Sony at 60i
Same as #3, but use JES Deinterlacer to get Sony 60i to 30 fps.(I tried this out, by the way, and the resulting frame rate, after deinterlacing, showed up in the inspector window at 30, not 29.97. Is that a problem?
Anyway, I aplogogize for wearing out my welcome on this forum, and I thank everyone for creating such a wonderful bank of information.

Not sure what you're trying to achieve here - for the best overall quality, if possible, choose a frame rate that all the cameras can achieve. That way you won't lose quality in the conversion.
If you're not satisfied with that, you need to do some tests to see which gives you the effect you like best. Nobody here can help you really - it's up to you.
Andy

Standard frame rate for 1080p NTSC?

Hello and thanks for having me! Very new(b) to Adobe Premier, so I'll throw something basic out, thanks for your advice:
the short version:
What is the 'standard' framerate for NTSC 1080p? Does this framerate differ from what you would use for output at 720p,
and would you choose different framerates depending on delivery method (web vs. bluray)?
the long version:
I have at my disposal a very capable rig to work on, and just doing some basic editing for my audio CV reel. The source material is usually 1080p and sometimes 720p, whether it be streamed into my capture card HDMI from playback sources, or full production originals which I have scored for clients.
Therefore, while editing my reel together, I'd like to work at full 1080p and downconvert for smaller formats afterword.
However, I am very new to video editing, and not sure what framerate to work in. I see the available selections of NTSC 1080p at several framerates,
and I am aware of all available framerates in the US and abroad, so my question is:
What is the standard frame rate for NTSC 1080p used for BluRay or highbandwidth web transmission? Some are telling me 'use 60, its standard'. Others tell me its 24. Still others say 24 is only for working with film, or interpolating other sources to 'make your stuff look like film'.
Thank you for any answers or resources, and have a nice evening!

For Blu-ray you can have two frame rates at 1080 resolution, 30 fps interlaced, or 24 fps progressive. 1080p/30 will not go onto a Blu-ray.
At 720 resolution, you can have 60 fps or 24 fps, both progressive.
If you want to work at 1080p, your only option is 24 fps.
Web delivery is a different matter. There are no defined standards and pretty much anything you like will play on the web.
(On a side note, drop and non-drop frame refers strictly to the timecode information, and does not regulate frame rates.)

Why do I get low frame rate for games while charging?

I have a Lenovo g505s laptop , and when I play games while charging(plugged in) , the frame rates for every game drop to 15-20 fps. Is there any driver update that I require? Or any other solution to this problem?
Solved!
Go to Solution.

hi thematrix01,
Welcome to Lenovo Community Forums!
Can you try running a BIOS update and see if that will fix it.
Make sure to read the read Me file first.
BIOS Update
Read me
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

When a new release iOS for iphone 4S ?

when a new release iOS for iphone 4S ?

iOS 7 will come out sometime from September to December. No other information about the timing of future iOS releases is publicly available.
(88224)

Frame rate for FLVs in FLEX, 10, 12, or 15?

We are using Flex to create a rich internet application that
delivers a lot of video which is then synchronized with a series of
screen events. Our concern has to do with the frame rate for the
FLVs. We are shooting at 30fps and have been told that the delivery
should be a multiple of 30, hence either 10 or 15fps. But Flex is
at 24fps, so we were wondering if the FLV should be delivered at
12fps. Any advice?

you need to optimize your code/display especially if you're creating an app for a mobile device.
one of the easiest things to do is to enable the cacheAsBitmap property of most movieclips and assign a cacheAsBitmapMatrix to those movieclips that would benefit.

When will new update (firmware) for E72 will come?

when will new update (firmware) for E72 will come?

Firmware update for E72 has already been released..
v22.007 has been around for many European models since around January
v23.002 has been around for Asian/Middle-East models since this February.
Some operator-branded phones may not have available updates yet though.
You can use the Device Software Update page (search for the links in Nokia website) and enter your product code to find out if your product code has been included in the firmware updates already.

Istopmotion. how can i change the frame rate in a project?

so i finally got istopmotion and i love it. its a bit tricky using the built in isight to grab shots but i am getting an external one. anywho, i was wondering if there is a way, once you have started working on a project, if you can change the framerate. i started a project, got pretty far into it, and found it was too fast. i'm probably just gonna redo this project but i wanna know for the future. thx

When you open up a new project you select your frame rate (same place where you select the format of your project). You could always slow/speed things up when you edit later in FCS or whatever you like to use for video editing.

Export XML in right frame rate for resolve?

Hi!
I'm in serious need for some help! When I import my exported XML sequence from premiere in to DaVinci Resolve 10 lite, I get an error message saying "The imported sequence frame rate (25) must be the same as the project frame rate (23,976)." All of my settings in Premiere that I can think of is set to 23,976fps, but if I understand the error message right, DaVinci claims the XML is 25fps... doesn't make any sense at all. I've tried for several hours now getting this to work, but it won't.
I would really appreciate some help with this one, I'm in a hurry (as always, we're behind schedule). Worked with Davinci many times before, never had any problem with it.
Regards
/Patrik

I am not a Resolve user, but could it be that Resolve has been set up for a 25fps project? And maybe the lite version restricts your frame size?
Just curious.

Getting data rate, frame rate for encoded clips

In quicktime movie info gives frame rate and lots of great
info. I can't find any software that does that for mac...only for
PC. I need to see the results of my choices. I don't understand why
this is so hard to find.

>bit lost since I bought a new HD video camera. This project needed to be on DVD
A DVD is MUCH lower than the resolution of your new camera... the picture in the next link shows the relative sizes... your DVD is never going to look as good as a BluRay, which is what is needed to have HD video
Comparison picture of video screen sizes http://forums.adobe.com/thread/1120039

How can I change the frame rate of a project in imovie 10?

My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)

iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.

Is it possible to have one central user defined exchange rate for a project

When i create deliverables for a project. It asks for an exchange rate type. On entering user i am prompted to enter an exchange rate.
Is it possible to use the exchange rate setup at the workplan level for all deliverables rather than entering the rate at each deliverable.?

Hello
The exchange rate value you set in the workplan is only used for converting planed amounts entered in foreign currency. There is no standard functionality to configure a default value for USER conversion type.
Could you further elaborate on the business requirement? Why do you use conversion type as USER for events, and not a centralized conversion type managed on the GL daily rates?
Dina

Frame rate for camera does not match with AVI output

Hello,
I'm taking a video from a Basler A504K camera of well plate bottoms deflecting down. I have a frame rate indicator from the Vision Acquisition to see at what fps the camera is acquiring images, and I also have a frame rate controller at the IMAQ AVI Create VI.
The problem is when I set the frame rate at the Create VI. The higher I set the frame rate, the fewer frames it seems to take. For example when I play the videos on Windows Media Player, at 10fps, the video length is 60s. At 100fps, the video length is 6s. At 20fps, it's 30s, and at 50fps, it's 12s. Obviously, the video length decreasing by the factor by which I increase the fps. But since higher frames per second videos show a slower/longer videos, since they have more images to display per second?
I need to be able to see a slow increase and decrease in the well deflections smoothly. At high frame rates, the video goes by so fast that I cannot analyze the deflections. At low frame rates, the video is slower, but there are too many missing frames so the deflection is not smooth (ie. you see no deflection one second, and the next, you see the peak deflection without seeing the gradual increase in deflections). It is very hard to find an "ideal" frame rate, so I was wondering if there was another way to control the frame rate such that I have high fps, and longer video lengths?
I'm attaching my VI. The bottom loop is where all the Video and Camera controls are. The top loops is to control pressure gauge and valve (just ignore that loop)
Thank you,
B.J. Kim
University of Michigan
Attachments:
Injury_Pressure_PulseFINAL_AVI.vi ‏174 KB

Hi B.J. Kim,
The problem you're seeing with the fps and video length makes sense to me. If you keep the overall frame count constant and change only the rate of playback, then the video time will be indirectly proportional, as you have noticed. Just from simple math, it appears like you kept the video image at a constant of 600 total frames while changing the frame rate between 10, 20, 30fps, etc. If you're looking to have more resolution in you video, maybe you could increase the actual frame rate of acqusition from your camera. You may also try placing a small millisecond wait in your while loop to slow down execution speed.

Best bitrate/frame rate for 1080 and 720 HD?

What seems to be the best bit rate and frame rate to use for
HD video for best playback on a Mac Mini. Plan on using H.264 encoder
to be compatible with iTunes,etc. (I like iTunes for consolidating all my media).
I have downloaded several movies from iTunes, both HD and SD, and they all
look great and playback smoothly.
I will be using a 32" Samsung HDTV.

FWIW, I've been working on a 720p project and have found the "proxy" on the cinema display pretty good for judging focus. We thought we found some material with soft focus and actually took it to a post house to look at the tape on a CRT. It was out of focus.
If I remember correctly, I think Decklink made an adapter that would allow you to view HD material on the cinemadisplay. Maybe someone else can pipe up with the specifics. Someone else also recently posted this link: http://www.matrox.com/video/products/mxo/home.cfm.

When is new frame rate for HD projects?

Similar Messages

Maybe you are looking for