When is ORATAB file created during Installation?

DB version:10gR2
When is ORATAB file created during installation. Is it created when we run rootpre.sh?

Hi,
Normally the path is in Oracle_home only for example,
/u01/app/oracle/product/10.1.0/db_1/root.shYou will be prompted for that while installation goes on.
@Nicolas,
Apologies for the same reply as I didnt refresh the page before posting.
Aman....
Message was edited by:
Aman....

Similar Messages

No PSWCLIEnvironment file created during installation

I've installed SUNWisw and the PSWCLIEnvironment file was not created during the process.
Could anyone tell me what data the file contains as I have to create it on my own?
Tried reinstalling with the same effect.
I'm installing the following version: isw.6.0.sp1.solaris.sparc

Did you previously had Firefox installed?
The Firefox 4 RC version is a regular release and will replace the current Firefox entry in the Start menu even if you do a custom install (haven't tested this, so I might be wrong). You can easily create a new entry in the Start menu yourself if it is missing by dragging the desktop icon to the start menu or by using Windows Explorer to create a folder structure in "C:\Users\All Users\Start Menu\Programs\Mozilla Firefox" if that folder is missing.

I bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom

i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also

Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
1) Ensure the device is powered off.
2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
4) When the restore screen appears (exclamation mark), release the Volume Down button.
5) From the restore screen, press then release the following keys to initiate the reset process:
1. Volume Up button
2. Volume Down button
3. Power button
4. Volume Down button
*Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
-KristieQ_VZW
Follow us on Twitter @VZW Support

When oraInst.loc file is created during installation on linux ?

* QUES during installation :*
Is this really true ?
When executing orainstRoot.sh , It creates the inventory pointer file (/etc/oraInst.loc).
In my case , " the file was created before executing orainstRoot.sh "
+ As far as I know , end of the installation only we are running orainstRoot.sh script .+
+ before running that the orainstRoot.sh script , i checked here ..+
+[root@localhost oraInventory]# id+
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
vi .oraInst.loc
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
* NOTE : orainst.loc file created before running orainstRoot.sh*
Prouuct 10g r2 on redhat 5

Given link says orainventory_location is the location of the oraInventory directory:
but directory not found.
*$ pwd*
+/u01/app/oracle/oraInventory+
*[oracle@localhost oraInventory]$ ls -al*
t+otal 48+
drwxrwx--- 7 oracle oinstall 4096 Feb 1 04:35 .
drwxr-xr-x 7 oracle oinstall 4096 Feb 5 04:52 ..
drwxrwx--- 2 oracle oinstall 4096 Feb 11 00:12 Contents
drwxrwx--- 2 oracle oinstall 4096 Feb 11 00:11 ContentsXML
-rwxrwx--- 1 oracle oinstall 37 Jan 31 11:10 install.platform
drwxrwx--- 2 oracle oinstall 4096 Feb 5 04:33 locks
drwxr-x--- 3 oracle oinstall 4096 Feb 1 04:16 logs
-rwxrwx--- 1 oracle oinstall 307 Feb 1 04:16 oraInstaller.properties
-rwxrwx--- 1 oracle oinstall 63 Jan 31 11:10 oraInst.loc
-rwxrwx--- 1 oracle oinstall 1192 Jan 31 11:10 orainstRoot.sh
drwxrwx--- 2 oracle oinstall 4096 Feb 1 04:35 oui
-rwxrwx--- 1 oracle oinstall 3337 Jan 31 11:07 sessionContext.ser
*$ cd /orainventory_location/logs*
bash: cd: /orainventory_location/logs: No such file or directory
*$ find / -name orainventory_location>/dev/null*
find: /usr/share/ssl/CA: Permission denied
find: /usr/share/Pegasus/scripts: Permission denied
find: /boot/lostfound: Permission denied+
find: /tmp/keyring-kUl6ry: Permission denied
find: /tmp/keyring-W9rMuT: Permission denied
find: /tmp/vmware-root: Permission denied
find: /tmp/gconfd-root: Permission denied
find: /tmp/keyring-sErBRg: Permission denied
find: /tmp/lostfound: Permission denied+
find: /lostfound: Permission denied+
find: /home/sandyagupta: Permission denied
find: /home/sandya: Permission denied
find: /proc/tty/driver: Permission denied
find: /proc/1/task/1/fd: Permission denied
find: /proc/2/task/2/fd: Permission denied
find: /proc/3/task/3/fd: Permission denied
find: /proc/4/task/4/fd: Permission denied
find: /proc/5/task/5/fd: Permission denied
find: /proc/6/task/6/fd: Permission denied
find: /proc/86/task/86/fd: Permission denied
find: /proc/104/task/104/fd: Permission denied
find: /proc/105/task/105/fd: Permission denied
find: /proc/107/task/107/fd: Permission denied
find: /proc/87/task/87/fd: Permission denied
find: /proc/106/task/106/fd: Permission denied
find: /proc/253/task/253/fd: Permission denied
find: /proc/373/task/373/fd: Permission denied
find: /proc/399/task/399/fd: Permission denied
find: /proc/1608/task/1608/fd: Permission denied
find: /proc/1647/task/1647/fd: Permission denied
find: /proc/1967/task/1967/fd: Permission denied
find: /proc/2132/task/2132/fd: Permission denied
find: /proc/2151/task/2151/fd: Permission denied
find: /proc/2152/task/2152/fd: Permission denied
find: /proc/2370/task/2370/fd: Permission denied
find: /proc/2485/task/2485/fd: Permission denied
find: /proc/2537/task/2537/fd: Permission denied
find: /proc/2912/task/2912/fd: Permission denied
find: /proc/2916/task/2916/fd: Permission denied
find: /proc/2938/task/2938/fd: Permission denied
find: /proc/2958/task/2958/fd: Permission denied
find: /proc/2987/task/2987/fd: Permission denied
find: /proc/3075/task/3075/fd: Permission denied
find: /proc/3085/task/3085/fd: Permission denied
find: /proc/3100/task/3100/fd: Permission denied
find: /proc/3119/task/3119/fd: Permission denied
find: /proc/3127/task/3127/fd: Permission denied
find: /proc/3138/task/3138/fd: Permission denied
find: /proc/3148/task/3148/fd: Permission denied
find: /proc/3172/task/3172/fd: Permission denied
find: /proc/3191/task/3191/fd: Permission denied
find: /proc/3210/task/3210/fd: Permission denied
find: /proc/3223/task/3223/fd: Permission denied
find: /proc/3234/task/3234/fd: Permission denied
find: /proc/3244/task/3244/fd: Permission denied
find: /proc/3323/task/3323/fd: Permission denied
find: /proc/3375/task/3375/fd: Permission denied
find: /proc/3431/task/3431/fd: Permission denied
find: /proc/3480/task/3480/fd: Permission denied
find: /proc/3483/task/3483/fd: Permission denied
find: /proc/3750/task/3750/fd: Permission denied
find: /proc/3980/task/3980/fd: Permission denied
find: /proc/4013/task/4013/fd: Permission denied
find: /proc/4308/task: No such file or directory
find: /proc/4345/task/4345/fd: Permission denied
find: /proc/4414/task/4414/fd: Permission denied
find: /proc/4440/task/4440/fd: Permission denied
find: /proc/5075/task/5075/fd: Permission denied
find: /proc/5078/task/5078/fd: Permission denied
find: /etc/cups/certs: Permission denied
find: /etc/racoon/certs: Permission denied
find: /etc/Pegasus: Permission denied
find: /root: Permission denied
find: /var/spool/clientmqueue: Permission denied
find: /var/spool/cups: Permission denied
find: /var/spool/cron: Permission denied
find: /var/spool/mqueue: Permission denied
find: /var/spool/at: Permission denied
find: /var/lock/lvm: Permission denied
find: /var/lib/dhcpv6: Permission denied
find: /var/lib/Pegasus: Permission denied
find: /var/lib/slocate: Permission denied
find: /var/lib/nfs/statd: Permission denied
find: /var/cache/alchemist/printconf.local/wm: Permission denied
find: /var/cache/alchemist/printconf.rpm/wm: Permission denied
find: /var/cache/samba/winbindd_privileged: Permission denied
find: /var/log/audit: Permission denied
find: /var/log/samba: Permission denied
find: /var/log/ppp: Permission denied
find: /var/empty/sshd: Permission denied
find: /var/run/mdadm: Permission denied
find: /var/run/usb: Permission denied
find: /var/run/sudo: Permission denied
find: /var/run/mdmpd: Permission denied
find: /var/run/tog-pegasus: Permission denied
find: /var/gdm: Permission denied
Could you please help me to find ?

How do i fix the Error 26073 when i try to creater an installer for my applicati

When i try to create a Labview V6.1 installer for my application i get the error
Error26073 occured at Build application.vi>>Dist call Create Installer.vi>>Win Install Create.vi>>Win Install Add files.vi>>MSI DK Add shortcut.vi
the possible reason listed is NMDK_AS_BAD_SHORTCUT_NAME
I have heaps of disk space free
THe installer worked fine a few months ago

Hi Rambo,
Thank you for contacting National Instruments. From the information you have provided here, its sounds like a couple of different things can be causing this issue. In looking at some previous instances where this error code was reported when using the application builder, it would be worthwhile to look at the file name field and the location the VIs are saved.
Take a look at the field where the file name is provided and ensure only the name is in this location. By this I mean that the file path and name aren't both concatenated and entered here.
Also, if the VIs are saved in the user library or the vi library see if it makes any difference if they are moved to another directory.
I hope this helps! If not, any other possible information that you have or may come upon would definitely be helpful. Have a great day!
Jason W.
National Instruments
Applications Engineer

Import error when importing .psd file created in Photoshop CS3

I have a file that was created in Photoshop CS3. I am trying to import this file into Catalyst CS5, but I keep getting an input error. I created a file in Photoshop CS5 and I was able to import this .psd file successfully into catalyst. So I guess my question is this; Does Catalyst support .psd files created in Photoshop CS5 only? If this is the case, how can I convert the CS3 .psd to a CS5 .psd

I am now building my files using photoshop CS5. A few challenges I have experienced while trying to import into Catalyst:
- If I do a straight import into Catalyst, I loose all my colors in Catalyst. That is, catalyst imports all my vectors without any of the colors I had in Photoshop. My understanding is that Catalyst has libraries to support Photoshop files, so your import from Photoshop should not look any different in Catalyst.
Work Around: I have had to rasterize / merged all my image layers for the different components I have built in Photoshop CS5. Then when I start the import process I click the Advanced button on the catalyst import dialog. From the advanced dialog, I have to flatten (to bitmap) all the images I intend to import.
This process takes about two hours because I have a lot of components on the page.
Is there something I'm not doing right here? I'm not seeing the value add to Catalyst, if it's taking me this long to just import .psd files

Template File created in DreamWeaver Looks ok. But when a new file created with this template shows disordered

I created a template file in DreamWeaver cs5. It is OK. and it looks like this, with Pink box showing the editable region. http://smsoftsolutions.com/downloads/test.jpg
Now the problem is, when I create a NEW html file from this Template, in the DESIGN view, the template contents are shown in a flowing mode. ie. Absolutely positioned DIVs are showing in a disorderly way, as shown in this screenshot. http://smsoftsolutions.com/downloads/test2.jpg
When I preview it in browser, it is showing as I expect. But only in the design mode, it is showing in a relatively positioned way.
Can anyone tell me what I should do in the dreamweaver settings, to show the layout in a WYSIWYG way?

Hi,
Thank you for your reply.
If I post the pages alone, the link to the images will be broken.
The css files also will be broken.
The css file should be in the folder css, images should be in the folder home_images, and template file should be in the folder templates.
The link to three files are:
1. HTML FILE
http://smsoftsolutions.com/downloads/t.html
2. TEMPLATE FILE
http://smsoftsolutions.com/downloads/vetiver_master.dwt
3. CSS FILE
http://smsoftsolutions.com/downloads/css/vetiver_css.css
Sincerely,
Tomy Sebastian
>

Dump file created during opening the CFL

Hi,
    I am facing a problem in SAP8.8. When i am opening a CFL of Business Partner then .dmp file is created.   The file location is
   C:\Documents and Settings\BODHISATYA\Local Settings\Application Data\SAP\SAP Business One
   Can anybody help me why this problem occur?

Hello
Sometimes, when a user settings (customized settings of a form) is contains a field, which is deleted from SAP B1, the application dumps. This happens only in one company database.
Could you try it from the sap b1 application
- another user in the same company db (i think it must dump also)
- a different company database
Come back with the results.
it s a test or a productive database?
Regards
János

FM11 crashes when opening DITA files created with FM7.2

Hi all,
I am finding out new truths every day now about FM11 and DITA 1.2..
The latest problem: FM11 crashes (on all our computers) when trying to open existing DITA files. These were created with FM7.2 using the DITA application pack. FM11 is newly installed and uses its standard configuration out of the box. Win7 64bit.
No dialog opens, FM11 just hangs for a while, then dies.
I do not think that I will put much effort in resolving this and just maintain existing projects with older FM versions. So just for interest, is this a known bug?
Robert

This isn't a new restriction, but it does have to do with the structure app implementation in FM. In the FM app pack (and all DITA 1.0 or DITA 1.1 implementations that I'm aware of), the structure app was based on the ditabase model, which allows all topics in any order in the same file. But with FM's DITA 1.2 apps, they created separate apps for each topic type, which restricts the topics in that file to that type. If you open the file with the DITA 1.2 ditabase app (is there one?), you shouldn't have any topic nesting restrictions.
Regardless .. it shouldn't crash FM.
...scott

Synonym AREA created during installation?

I have a client software application that uses the synonym "AREA" for one of its tables. We already have AREA as a synonym of a system table. Was that created by Oracle during the database installation? We have Oracle Enterprise 10.2.0.3.0. A year ago we didn't have this problem and the software vendor says they have always used AREA as a synonym.

QL> select * from dba_synonyms where synonym_name = 'AREA';
OWNER                      SYNONYM_NAME
TABLE_OWNER                 TABLE_NAME
DB_LINK
PUBLIC                      AREA
MDSYS                      OGC_AREAEdited by: sb92075 on May 19, 2010 1:12 PM

How do I restore backup swm files created during system recovery from external hard drive

Good day,
I was facing some problems with my laptop (HP Envy 17 3D Notebook with windows 7 home premium, 64 bit) and I had to return it back to its original state using system recovery.
During the process I was asked if I want to back up my data. I have chosen to backup my data in the flash drive. Once the process has completed and my laptop is to the original state, I tried to recover my backup but it tells me:
The version of this file is not compatible with the version of windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
If i click run as administrator it tell me:
Windows cannot find 'F:\Backup_2015-04-29 143842\Restore.exe'. Make sure you typed the name correctly, and then try again.
there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else.
any help will be greatly appriciated.

Hi @Jef35,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that while doing the recovery back to factory you opted to backup your personal files and would now like to know how to restore them .
Here is a link to HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
If you appreciate my responding, please click the kudos button below to say thanks.
If this resolved your difficulty please select solution provided to enable other posters to locate this information more easily.
I hope this helps
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How do I restore backup1.swm files created during system recovery from external hard drive.

On my hp dm1 with windows 7 In full detail, this is what I did. I clicked to do a system recovery, it asked if I wanted to backup the files, I said yes. It said it backed up my files on the external hard drive. I continued the system recovery. It set my computer back to factory settings. I tried to recover my backup, it acted like it was restoring the files and showed them going into the c: area in a folder. I open the folder and it says the folder is empty. I hit properties and the folder contains 10mb+ of data. I go back into my LaCie drive, there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else. Have a 12 page research paper in these back ups that is due in a few hours so any help will be greatly appriciated.

@Daniella1985,
If the standard procdure of locating the program launcher (a .exe file) on the first backup media (disk 1 or the external storage device) is not working, then you can manually extract the files using 7-zip.
7-zip can be found here.
Once 7-zip is installed, open it and navigate to the first .swm file of the backup. Right-click the .swm file and select 7-zip>open archive. Once that opens, it should reveal the contents of the .swm files. If the file contains something you want to keep, you can either extract each invidual file or extract the entire directory. If you want to extract each individual file, highlight the desired file and click the extract button at the top. If you want to extract the entire directory, make sure no items are highlighted and click the extract button at the top.
This is a manual process and it can be a large task depending on how many files were backed up, but it is one method to get the backedup files when the standard procedure is not working.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Binary file created during db2bak

Hello,
I have a Sun ONE Directory Server 5.1. Every night, I excute db2bak command to save my data. This command creates binary file (log.0000001290 for example). Does anyone know what is this file ?
Thanks.
Delphine

These are just transaction log files. Changes are made to these logs and then processed periodically by the directory server. You should see them increment as they get created and then processed.

Large export file created during expdp

Hi,
When i execute datapump export for a single table it will make 5.6G export file size. While there is only 39K rows in the table. When i import this export file to another scehma it takes only megabytes. More than 98% size reduction. This is mytable sctructure.
ods.mytable
tb_ID NUMBER(22),
p_ID NUMBER(9) NOT NULL,
N_ID NUMBER(9),
D_NAME VARCHAR2(255 BYTE) NOT NULL,
FLAG VARCHAR2(1 BYTE) NOT NULL,
BODY CLOB
Most size taken by CLOB. Looks like most of data is shrinkable. How can i shrink the table to reduce the table size?
Thanks in advance

You can use Shrink or Move option of alter table command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#i2192484
thanks
http://swervedba.wordpress.com/

Error when Importing m4v files created with Handbreak

I am copying my VHS home movies to DVD using a Sony DVD recorder. When I put the disk into my Macbook Pro it looks like a folder rather than a disk image. The folder (named SONYDVD_RECORDERVOLUME) is empty when I click on it. It plays fine on my DVD Player. Handbrake is able to load the DVD files and I can copy them using iTune high quality recording set. The resulting file funs fine with QT, loads on my iPod and plays fine, will copy into iMovie but when I try to put into Final Cut Express I get an error message : File Error: Unknown File. Is there something that I am missing??? Ideas would be appreciated,

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

When is ORATAB file created during Installation?

Similar Messages

Maybe you are looking for