When is PCI-6704 supported by NI-DAQmx?

As of NI-DAQmx 7.3, this analog output card is only supported by Traditional NI-DAQ. This is basically a question for NI, but if you know feel free to answer!
Thanks,
-David Moerman

Hello David,
There are no plans at this time to support PCI-6704 in DAQmx.
-Arun V
National Instruments

Similar Messages

Synchronisation de PCI-4472 et PCI-4474 et support DAQ traditionnel/DAQmx

Bonjour,
comment émuler la fonction RTSI (synchronisation de l'acquisition entre
les
cartes PCI 4472 et 4474) avec DAQmx version 7.2 ?
A l'éxécution de l'exemple Multi-Device Synch-Shared Timebase-Cont
Acquisition.vi, j'obtiens le message d'erreur suivant :
L'erreur -200452 s'est produite à Noeud de propriété DAQmx Timing (arg 1)
dans
Multi-Device Synch-Shared Timebase-Cont Acquisition.vi
Raison(s) possible(s) :
Specified property is not supported by the device or is not applicable to
the
task.
Property: MasterTimebase.Src
Task Name: _unnamedTask<3>

(Réponse identique au forum posté le 10/05/2004).
Bonjour,
Les cartes PCI-4472 et PCI-4474 ne sont pas dans la liste des cartes compatibles avec l'exemple "Multi-Device Synch-Shared Timebase-Cont Acquisition.vi".
Ceci peut expliquer pourquoi le noeud de propriété renvoie une erreur DAQmx.
Vous pouvez utiliser l'exemple "Multi-Device Sync AI Shared Timebase & Trig DSA" qui a été développé spécialement pour les cartes DSA (et donc les PCI-4472 & 4474).
Cet exemple permet de faire de l'acquisition simultanée finie avec déclenchement commun. Pour faire une acquisition continue, il vous suffira de paramétrer le NI-DAQmx Timing à "Continuous samples" et d'intégrer le NI-DAQmx Read dans une boucle While.
Cordialement.

Dose PCI-6221 support NI-Traditioanl DAQ?

When I installed the PCI-6221 (M serials) multifunction card by the MAX, I found it only existed in the DAQmx group but nothing in the traditional NI-DAQ group. How can I use the traditional NI-DAQ Api with this card?

Hello,
I recommend you to use NI-DAQmx because it's much easier to program your board.
You can download Traditional NI-DAQ Compatibility VIs from our website. The Traditional NI-DAQ Compatibility VIs allow you to run LabVIEW applications written in Traditional NI-DAQ on devices that are only supported by NI-DAQmx. There are some functionality restrictions and you must have LV 7.0 or later. Please read the description carefully.
http://digital.ni.com/softlib.nsf/954feaeea92d90918625674b00658b83/9d67f671bcc6850586256e630059308b?OpenDocument
Hope this helps.
Regards,
Luca

Bios "pcie 3 support" setting is not working?

Hi All,
When I dissable pcie 3 support in bios, it does not seem to turn it off.
I just got this mobo (z77 mpower) with a 3770k and I am having issues with my two Gigabyte 670 in sli (they seems to run fine not in sli). These same cards were fine in my other computer which is a Z68 mobo and 2600k.
I did some reading on a number of forums and there seems to be an issue with many of the Gigabyte 670 cards runing on pcie 3.0. A known fix is to turn off pcie 3.0 in the mobo bios and have them run in pcie 2.0. This sounds right since I was not having any issues on my z68/2600k pcie 2.0 setup. The crappy thing is if you have a mobo that does not have the option to turn of pcie 3 support in the bios... you are screwed and stuck with having ussues.
So my problem is... when is dissable PCIe 3.0 support in the z77 mpower bios and in win7, it still shows that my cards are running in pcie 3.0, I have checked in two places both nvidia ctrl panel and also in gpuz and I continue to have the problems with the cards. When I go back into the bios to double check afterwards, it still shows as off.
Has anyone dissabled the pcie 3 support in bios and can confirm that it does infact actually turns it off and makes the the slots pcie 2.0? Any help would be appreciated as I need to somehow make these cards run in pcie 2.0 and not 3.0
Thanks,

Quote from: flobelix on 24-February-13, 05:42:22
What issues are you talking of?
Issues I am having are only happening is sli. I know its not a PCIe slot on the mobo, I ran a single card in each slot without issues. I also know that these two same cards ran in sli for the past 8 months without any issues on my Z68 board, this only started when I put them into the Z77.
Weird thing is, lets say I put card A in top slot and card B into the other slot.... I get random slowdowns , not only in games but also when browsing and even just looking at the desktop. The computer would freeze up (not freeze completely just everything would become bogged down for up to myb 10 seconds.. then gone for two or three then same freezing again again. Benchmarks like 3dmark11 results would be randowm, I ran 5 tests consecutively and they all ranged from 4000 - 14500 (14500 is what the system should be getting)
Now if I switch the cards and put card B into slot A and card A in the other, those same slowdowns and freezes now become complete system lockups... bsod and or video driver crashes (nvidia kerner stops respondong)
I know its not a driver, bio or software issues. I am having same symptoms under old and new bios on both mobo and vod cards. Also tryed many different versions of vod drivers. I have also dissabled on board sound, wifi and bluetooth to rule those out.
Quote from: fulwider8 on 24-February-13, 07:31:54
Not sure if this might be your issues...Would like to know some of your symptoms. But I have a post here on Ix boards. I was having a slight issue with my driver crashing, and not running great in SLI. Not a blue screen or anything like that. I really thought my video cards were defective. Come to find out. I had one stick of ram that was making all the issues happen. My symptoms.... Every-time I ran my cards in sli..it would cause a stop driver error in Nvidia control panel. If I ran the cards without sli or by themselves. no errors. One of the guys here suggested taking ram out and using only the second and 4th dimm. I took out 2 sticks of ram and it cleared right away. Found out that one of the sticks I took out was bad...Not bad enough to stop working..But just enough to cause these issues. Just a thought or a suggestion-check your ram? I would have never thought the ram was causing my problems..
Not sure if I am speaking out of place..But I only own the z77a-gd65...I have owned other z77a boards too. I have only tried to disable the pci-e 3.0 on this board with no issues. Hope you figure it out. Would like to know what is causing your issues. I plan on purchasing this same board in the future.
Thanks for the feedback fulwinder, I thought the same at first and tryed another manufacturers ram and the results did not change:(

Print to PDF - using Snow Leopard (Saving a PDF file when printing is not supported. Instead, choose

i have a PDF form that i created that is used as a custom proposal that my company sends out to potential clients. the form in its editable state is only used internally. we recently upgraded to snow leopard, but prior to the upgrade, we were able to fill the custom proposal form out using adobe reader, and, as you well know, we weren't able to save that edited document as a PDF with the custom form fields filled out. our work around using adobe reader was to print to a pdf using the adobe pdf printer in the printer dialog. with the addition of snow leopard, however, instead of choosing the adobe pdf printer, we were to choose PDF from the bottom left corner, then Save As PDF, and it would spit out an uneditable pdf that then allowed us to email it to the potential client without them being able to edit it as well as have an internal, digital copy for our records instead of having lots of paper floating around (i know this is also doable using security that disallows the client certain editing privileges, but printing to a pdf is much quicker and more efficient, and the pdf security isn't really that secure at its best).
in any case, i came across this gem of a post here on the support forums that installs another option from the PDF drop down on the bottom left of the print dialog menu that reads Save As Adobe PDF and is supposed to do exactly what i am trying to get it to do...print to a pdf file from adobe reader.
http://kb2.adobe.com/cps/509/cpsid_50981.html
once i updated to acrobat 9.2 (as the link above suggests 9.1), however, the Save As Adobe PDF does appear in the print dialog menu, but it still gives me the same error that acrobat 8 - 9 gave me while using Snow Leopard — Saving a PDF file when printing is not supported. Instead, choose File > Save — and as i've already explained, you can't save an edited pdf form in reader (as i am the only one in the office with acrobat) and still keep the fields as you've entered them in. the only work around is to print to a pdf but is apparently having some recent problems.
using acrobat, however, i know that i can save the editable pdf as a new file with the fields customized as i have left them, but it still saves it as an editable pdf and the print to a pdf option still remains the best option...that way we have digital copies internally that are uneditable that can be printed at any time or emailed to the client.
how can i do print to a pdf, based on what i've written above, using snow leopard and acrobat and reader?

A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

I am at Ramstein AB Germany. My iphone screen was smashed badly on the flight to Germany this morning. WHEN I access apple support for this subject it gives me 3 options call now, call me now or call me later. As I am in Germany with no coverage and no

I am at Ramstein AB Germany. My iphone screen was smashed badly on the flight to Germany this morning. WHEN I access apple support for this subject it gives me 3 options call now, call me now or call me later. As I am in Germany with no coverage and no working phone none of those options will work. Can you get this e-mail to someone who can help. My iphone serial # is C38xxxxxx. 1) I need to know where and how I can get a replacement somewhere nearby in Germany 2) If 1 is not an option I need to set up an appt to get a to get a new iphone at an apple store in Atlanta GA in the evening of 11 July.
Thank you very much, Phil Edelen
<Edited By Host>

Thanks, my wife is the one serving I am retired and trying to follow her as much as I can.
I will schedule an appt for my next time stateside. I have spent too much time on many Apple web sites trying to get an e-mail to communicate with anyone at Apple to no avail, only phone numbers. I guess if you are overseas with no international access you are out of luck communicating with them. I did find one e-mail address but the reply was computer generated and provided useless links.
If anyone has any e-mail address for anyone at Apple I would appreciate it.
Thanks again,
Phil

Saving a PDF file when printing is not supported. Instead, choose File Save.

I am using Mountain Lion (10.8.2) and I was using Adobe Reader version 9. In the past, I've always been able to print to file using the File -> Print dialogue but all of a sudden it stopped working. I read somewhere that installing the latest version of Adobe Reader (version 11) would remove the old printer, so I did so. It took me about an hour on version 11 to even find the pdf print to file option, but I am getting the same message. For what it's worth, when I try print to file from Microsoft Word, I have no problem. I have no idea why things changed all of a sudden, but does anyone have any idea how I can get this working again?

I checked with Adobe. No luck.
Allow me to clarify my problem:
I have Adobe Reader XI. I also use a Mac--imac and a MacBook Pro. My adobe was updated on 12/24. Prior to that point, I could open my print dialogue box and there was a PDF tab on the bottom left. In the drop down menu there were many choices, including but not limited to Open in PDF Preview, Print PDF, Save PDF, email PDF. If I selected one page of 30 pages from a document saved in Adobe, I could extract just that one page and save it or email it, without having to send the entire document. After the update, when I open a PDF file using ADOBE READER XI, and then open the print dialogue box, and follow those same steps, I get the message "Saving a PDF file when printing is not supported. Instead, choose File > Save." My question is why is this feature now unavailable and is there a way to fix it?
The answer I got from Adobe was that Adobe never had this function, so it must have been via my print or preview programs..which are apple. Does anyone have any thoughts?
Thank you.
https://forums.adobe.com/message/7124567

Saving a PDF file when printing is not supported.

Hi Guys,
I upgrade from leopard to snow and now I don't have the possibility anymore to to print PDF as a PDF.
Before I was going to print and then choose save as a pdf and everything ok.
Now after the upgrade to snow every time that I am going to print a pdf from a pdf (acrobat 9 and X) I received this msg "Saving a PDF file when printing is not supported. Instead, choose File > Save "
Why that happened ? how can I fix it?
The thing is that I have a pdf form (contract) that I have to fill up and print it as a pdf.
Now I can't do that I can save only the form with the fields unlock.
thanks you in advance for your help.
Xoxo
Fotis

Ah.. this is so annoying filled in a long form.. which doesn't allow saving.. I assumed as normal with this type of form I could print to PDF and at least get a electronic copy.. but no, I made the mistake of installing Adobe Reader.. and it has screwed up the print options.. when I try to save as PDF from the print menu I get the helpful suggestion
"Saving a PDF file when printing is not supported. Instead, choose File > Save."
When I do as suggested.. it helpfully tells me that it will only save a "blank form"..
Adobe has badly messed up their reader.. I now need to print out and then scan this document to get the electronic copy I need.. I will be uninstalling promptly after this fiasco..

When the update to support LTE will be released for Claro in the Dominican Republic?

Claro in the Dominican Republic has launched LTE (since yesterday) and proceeded to sell or give the 4G LTE Sim cards so the users can have the service. I went over, got my new sim card and inserted in my Iphone 5 (A1428), and said to my self "I'm good to go". Turns out I wasn't. Unfortunately, I could not get it working. I even moved around the city to see where I could get 4G coverage.
When I called customer service to argue about the lack of coverage and to discuss that this may be a scam from the company. The customer service person told me to go to settings>cellular> to toggle Enable LTE, and I replied that I did not have that option. Then the customer service clerk argued that I did not have an updated Device. My iphone 5 IOS version is 7.1.2.
After doing some research while on the phone with the customer service representative (it was a 45 min long call) I had to agree with him that maybe apple has to "released" or "enabled" the service for this specific carrier, just like it happened in Colombia when the LTE was introduced.
Currently there are 3 companies (Tricom, Orange, and now Claro) offering 4G LTE in the Dominican Republic and None are listed in the 4G LTE availability per device per country according to apple. https://www.apple.com/iphone/LTE/.
So my question is: When the update to support LTE will be released for Claro in the Dominican Republic? (it would be great if an apple employee could get involve in this thread, or escalated it to who can do something about it.)

FelipeV
Let me tell you something: no one is saying go and do something illegal to enable this feature on your phone and no one is reporting any confidential information; the purpose of this thread is to clarify some points:
The LTE Network for Claro DO is real, is functional and is not a Scam
The LTE Network works with compatible devices except iPhones, not by decision of the carrier but the manufacturer.
About that the date that when will be available is not a confirmed date, it's an estimate based on previous releases in other countries and information that I received from inside Claro, not a speculation (find the definition). Of course Claro hasn't confirmed because, like other says, is apple decisions and not their (you don't have to be a genius to figure that out).
Forums are to express yourself freely about a specific topic, and to give your point of view whether you agree or disagree with something, but when you do be polite and do it with respect and not with arrogance as you just did hinting others are stupid and do not know what they are doing. Take an advice from some one with a little bit of experience, you don't know when you will need some help.
Have a good night.

AcroPro9, snow leopard, "Saving a PDF file when printing is not supported"

Hi,
I have AcroPro9.1.3 (and 8 and 7 and Dreamweaver CS3, and probably other stuff too) on Snow Leopard (10.6.1).
I've read about de-installing the Acrobat printer and using "save as Adobe PDF" from the PDF button on the print menu. However, when I try this, I'm told "Saving a PDF file when printing is not supported". Note that this is AcroPro9, not AcroReader. I get the same message when I try any of the other options under the PDF menu on the printer menu in Acrobat. In other applications, tho, (eg powerpoint), the PDF button works fine.
Before the upgrade, the PDF button on the print menu didn't work either (same message), so I used the Adobe printer, but now I can't. I had always assumed that AcroPro was stopping me from using Apple's PDF generator in favour of the Adobe one. But maybe some of my settings are wrong.
I now cannot print to PDF from Acrobat. Help. There are 120 fourth year software engineering students who will appreciate any help I get, as I can then post my recent lecture notes for them.
(What I really want to do is to take my powerpoint slides and print 4-up versions directly. But the PPT idea of 4up wastes a lot of space, so I generate 1up PDF, and the 4up PDF from that using Acrobat. At least, I used to. It was so much easier in the old days with Latex and psnup ...)
-- Mike G.

My current solution is to print from Preview instead (which will let me use the Adobe print facility, unlike Acrobat itself).
In fact, I pretty much have no need for Acrobat at the moment.
Adobe and Apple between them seem to have some real problems with Snow Leopard. I can't get Dreamweaver to run anymore without immediately crashing (yes I looked through the help forums, deleted settings, etc etc). So I'm now looking for a replacement tool for Dreamweaver and will likely use that from now on.
Adobe is not looking very good to me at the moment. YMMV.
-- Mike

Message error: "Saving a PDF file when printing is not supported. Instead, choose File Save."

I have 2 problems creating a .ps file.
As i know, there are 2 ways of creating a Postcript file from a PDF.
The first is from the Print monitor. I go through menu File/Page Setup i give the exact dimensions from my spreaded pages and after that i go to Print and when this window opens,
i go down and left and i open the pop-up menu on"PDF" and i choose "Save PDF as Postscript"
There is where i get the above error message :
"Saving a PDF file when printing is not supported. Instead, choose File > Save."
And the second scenario, i get an equal problem.
If i go to Page setup and give the right dimensions of my spreaded document, after that i go to the File/Save as command, there is choose from the bottom pop-up menu, the option at Format: Postscript
If i do that i get the following message:
"The document could not be saved. An internal error occured."
What is wrong with all this?
Can anyone help me out?
System preferences.
Mac OS X 10.4.11
Acrobat professional 8.1.2
Thank you

Jon Bessant asked:
"Does this occur on every PDF file? The internal error message that is ..."
Yes, it happens on every PDF

Who will host websites when apple no longer supports this in iweb

Who will host websites when apple no longer supports this in iweb?

Has any one tried 1&1 Internet Linux hosting package?
https://order.1and1.co.uk/Hosting;?linkType=&linkOrigin=&linkid=hd.tab.hosting.p ackageselection
They fully support Mac users – I should be able to upload the files from iWeb and use the files on their Linux hosting package. Past experience is Sales; Info and Tech support teams at 1&1 are always very prompt and helpful. Just wanted second opinion before committing.
I gather 1&1 Internet also support Adobe Muse hosting.
http://tv.adobe.com/watch/muse-feature-tour/introduction-to-adobe-muse-with-spec ial-guest-danielle-beaumont/
Miffy O

I got a message in gmail "this version of Safari is no longer supported. Pls upgrade to a supported browser." When I click on 'supported browser' it takes me to Apple's Safari site but there is no 'upgrade now' button. What am I missing?

i got a message in gmail "this version of Safari is no longer supported. Pls upgrade to a supported browser." When I click on 'supported browser' it takes me to Apple's Safari site but there is no 'upgrade now' button. What am I missing?

Google seem to have decided in the last week or so that Safari 5.x, which is the newest Safari version available for Mac OS X 10.5 (Leopard) and 10.6 (Snow Leopard) is "not supported" any more, even though there are many reasons for staying with these OS X versions.
Try this (at your own risk, but it works for me), as it seems to remove the message by tricking Gmail into thinking your Safari version is newer:
-- Quit Safari
-- Locate the following file (location depends on your OS X version):
OS X 10.6 Snow Leopard:
/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/Resources/Info.pl ist
OS X 10.5 Leopard and older:
/System/Library/Frameworks/WebKit.framework/Versions/A/Resources/Info.plist
-- Drag the file to your Mac's desktop to make a copy. Also make a safe copy somewhere else eg your Documents folder, as if you lose or mess up the file Safari will not launch at all. Having a backup browser is also recommended.
-- Double-click it to open it in TextEdit
-- Locate the CFBundleVersion value (the last line in the file that has numbers in it) and increment the second digit of it to the required version of Safari e.g. Safari 6 now seems to be the minimum version that Google support so change the second number from 5 to 6 (don't change anything else, only the change the second number). The value is different depending on your OS X version but as an example, for Snow Leopard 6534.59.10 becomes 6634.59.10
-- Drag the file back from the desktop to its original location, choose the option to replace the old version, and enter your password when prompted.
-- Run a permissions repair in Disk Utility to set the permissions in the file back to what they should be (not required, but good practice).
-- Launch Safari and test Gmail.

HT202157 When will Apple TV support Amazon Prime Instant Video?

When will Apple TV support Amazon prime instant video?

Most of the YouTube video subtitles are inserted by flash. Unfortunately, ios OS products don't support flash. If you do want to play them with subtitle, maybe you can use a video converter to help you convert YouTube videos to Apple TV. The only thing you should make sure before the conversion is that the videos that you download is bearing the subtitle, then the converted files would have the substitles as well. Hope that would help.

When will HTML5 be supported on all browsers without Flash

When will HTML5 be supported on all browsers without Flash. Flash is a support nightmare. No matter how much Adobe wants to rescue it, it's antiquated proprietary functionality that poses both security and support issues.

"When will HTML5 be supported on all browsers without Flash?"
This is a really weird question. Why ask it here?
For starters...HTML5 support on all browsers is not something Adobe is responsible for, so why ask that question on this forum? Instead, if you want anyone with a stake in the issue to answer it, ask the browser manufacturers (e.g. Microsoft, Google, Mozilla, Apple) when they will be supporting all features of HTML5. The ball's in their court right now.
Secondly, for e-learning developers HTML5 is currently a bigger support nightmare than Flash ever was. At least with Flash we had a runtime (Flash Player) that all major desktop browsers supported. You could create a course in Flash or Captivate, and as long as the end-user's browser had a current version of Flash Player, you could be reasonably certain it would run, and run smoothly. HTML5 output from most current generation authoring tools runs like a dog with three legs. And e-learning developers forced to build HTML5 or mobiles are encountering a minefield of wildly differing screen sizes and inconsistent implementations reminiscent of the worst years of the 90's "browser wars". HTML5 is no picnic. Give me Flash any day.
Thirdly, Adobe already knows they cannot "rescue" Flash. Why do you think they've already started rolling out HTML5-centric apps such as the Edge Toolset.
Fourthly, the rumours of the death of Flash have been wildly exaggerated. Flash is very much alive and well and happily living inside many of the games and apps that people are currently playing with on their mobile devices.

When is PCI-6704 supported by NI-DAQmx?

Similar Messages

Maybe you are looking for