When is Receiver Agreement not needed?

Hi all,
I was going through the BPM logs and in one of the logs Jai Shankar had suggested that "we don't need a receiver aggrement if our target MI is Abstract"
Now I have several questions
1. In what cases will the target MI be Abstract? Why and when would we do that?
2. Why don't we need a receiver aggrement if our target MI is Abstract? What is the logic behind that.
3. Is there some other cases when Receiver aggrement is not needed.
Thank You

Hi Sonia,
>>. In what cases will the target MI be Abstract? Why and when would we do that?
Abstract MI are used with in BPM. So if you are sending a msg into a BPM(the target is BPM), then you dont need a Receiver Agreement.
>>2. Why don't we need a receiver aggrement if our target MI is Abstract? What is the logic behind that.
Receiver Agreement is just to create a binding between your communication channel with your scenario, but imagine when the target is BPM you dont need any commn. channel at all. So no receiver agreement.
>>3. Is there some other cases when Receiver aggrement is not needed.
No. In all other cases, Receiver agreement is mandatory.
Regards,
Jai Shankar

Similar Messages

Sender Agreement not needed when in httpclient to file scenario.

Hi,
I will like to understand why in the httpclient to file scenario, a sender agreement is not needed?
Thanks.

HI
Integrattion server - IS expects the messages in XML format. If you see the HTTP request you will see that we pass all the info contained in the Sender areement in the the HTTP request itself , namely - Message interface, message type and the namespace (along with login parameters). For IDOCs the the IDOC- XML are are sent to the IS (through IDOC port configuration at the source system.
When send a message to XI the sender knows that XI system parameters, but when at the reciver end there could be any any system that is reciving the IDOc/HTTTp message. you specify those message through a commumication channel and this channel is associated to a receiver agreement.
For more information you can search in sdn.
Regards
Goli Sridhar

Sender and receiver agreement not cerated

Hi .
I am creating configuration scenario in ID by importing the integration scenario which i created in the IR.
I crated communication channel template also and i added it to the integration scenario in connections.
Query 1?
do i have to create Communication channels also.....even After creating communication channel template (because it is not seen the ID below communication channel )
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario (sender and receiver agreements are not getting created automatically)peace tell me what is the reason???.
and how can i resolve this...
thanks
shakif

Hi Mohamed,
Query 1?
do i have to create Communication channels also.....even After creating communication channel template
Yes You have to create as it's just a template that u created in IR. But u can use the same for creating CC.
Check this link for what's the Diff. B/w CCT in IR and CC in ID
Re: Communication Channels
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario
Yes. it will create automatically.
Just check my posting in Wiki for simple File to IDOC scenario might be u missing something
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
and check my reply in this thread
Re: Doubt in transfering integration scenario from IR
Regards
Sachin

Problem when creating receiver agreement for File to IDOC scenario

I have done the following :
1. Created two business systems one for the file system and other for the R3 system and also I created two communication channel, one as sender communication channel and one as receiver communication channel.
2. Created the receiver determination
3. Created the interface determination
4. Created the sender agrement
5. Now when I was trying to create the receiver agreement I want to assign the receiver communication channel i have created to the receiver agreement but the F4 help gives me no records and I am thus stuck at this point.
Please suggest me how to proceed forward from here.

Hi ,
5. Now when I was trying to create the receiver agreement I want to assign the receiver communication channel i have created to the receiver agreement but the F4 help gives me no records and I am thus stuck at this point.
Make sure that your created communication channel for reciever is under the respective reciever business system and give the same while creating the reciver agrement.
sekhar

Error : Receiver agreement not found

Hi all,
My scenario is RFC to JDBC.
Its showing the below error, when 'I try to send data through test configuration after configuring ESR and ID part.
Receiver Agreement
Runtime error
Problem occurred in receiver agreement for sender -SAP_BL_ISU to receiver -RFC_To_JDBC_Async_R_SQL_bllmstest,urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1: No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1
<Trace level="1" type="B">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
<Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>
<Trace level="2" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for: </Trace>
<Trace level="2" type="T">-SAP_BL_ISU </Trace>
<Trace level="2" type="T">-RFC_To_JDBC_Async_R_SQL_bllmstest </Trace>
<Trace level="2" type="T">urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1 </Trace>
<Trace level="1" type="T">error with outbound binding. </Trace>
<Trace level="1" type="T">No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1 </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
please suggest me...

Hi,
This is configuration issue, please check the ESR sender/Receiver interfaces and the associated
Sender / Receiver agreement and the associated communication channels are configured correctly.
Try to test the configuration using Test configuration / send a test message from RWB to this interface.
If the configuration is correct and you are facing the same issue. try to delete the ID configuration and recreate it.
Before re-creating the configuration, do cache refresh.
Regards
Bhargava Krishna

Receiver agreement not visible in receiver determination( ID)

Hi,
I could not see receiver agreement in receiver determination in ID.
Even i could see my receiver agreement in ID.
Give some inputs to solve this issue.
Thanks & regards,
Ruban

Hi,
I did as u said..even though i could not see receiver agreement in receiver determination.
One more issue is in interface determination, if i select type of interface determination as Enhanced i could able to select name and Name space in inbound interface and interface mapping.
If i select type of interface determination as standard i could not see name , name space for inbound interface and interface mapping.
Thanks
Ruban

"No receiver agreement found" for BPM ???

Hi everybody
I think this could be an issue in the cache. I have a ccBPM and when I am sending the message who starts the BPM to the Integration Engine I got the following error:
<SAP:Stack>No receiver agreement found for sender -BS_SQL_Database to receiver -IP_ScanningStatus_01,http://xxxx.com/common/scanning.MI_JDBC_Response_Asyn_ABS</SAP:Stack>
IP_ScanningStatus_01 is an integration process and you do not need a receiver agreement ("not required" in receiver determination) to send a message to an integration process. Two weeks ago the process work and the very strange is, that in sxi_cache it shows the 31.07.2006 as last change/activation, but I did an activation yesterday. A full cache refresh did not change anything and the status of the cache is "up to date". We are on SP14 (:-<)
Regards Oliver

Hi Udo
yes, that is exacly my problem.
I deleted the corresponding processes in the repository and in the configuration. I recreated the process in the repository under the same name and after that I tried to import the porces in the configuration under the same name, but now I got the following error:
Unable to transport object Integration Process IP_ScanningStatus_01 | http://xxxx.com/common/scanning (CE_ONESAP_ACETATE_MFG_xx, 1.0 of celanese.com) of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_ScanningStatus_01 | http://xxx.com/common/scanning failed(serialization problem)
Any Ideas?
How can I delete the old process out of cache?
Regards Oliver

Receiver Agreement problem in XI

Hi,
The problem is that when the idoc calls adapter in XI, the following error message is thrown(Display XML Message Versions- window, SOAP Header):
com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=our_sender;TS=our_receiver;AN=WorkCenterMasterData;ANS=our_namespace
I have checked that the Receiver Agreements are configured right, there should not be problem with that. So what could be the problem? We just updated our XI to SP19, could this affect to idoc processing?

Hi,
I have got a couple of times that Receiver agreement not found even though I have receiver agreement. Also I have done some dummy changes and tried out. Also I have stopped and started the receiver communication channel. But it have not worked. Then I have started and stopped the File Adapter but that doesnot worked. I have done all the cache refreshes but the issue is not resolved.
Then finally just restarted the machine and it worked fine. So there are some caches which is not refreshing when we do the cache refreshes. They are only refereshing when we reboot. Can you also try all these steps and if you dont get success then try to bounce the system and check.
---Satish

Receiver and Interface Determination, Sender and Receiver Agreement

Hi Experts,
Could you please tell me, what Receiver Determination, Interface Determination, Sender Agreement and Receiver Agreement we have to use for the below blog.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Regards
Sara

Hi Sara,
WS->BP
Receiver Determination: Sender IF, Sender NS, Sender BS determine the BP
Interface Determination: Sender IF, Sender NS, Sender BS determine your start msg IF (abstr IF) and IF mapping
Sender Agreement: SOAP sender channel for that Sender IF, Sender NS, Sender BS
Receiver Agreement: not reqired
BP->DB
Receiver Determination: BP IF (abstr), BP IF NS, BP determine the 3rd party BS (DB)
Interface Determination: BP IF (abstr), BP IF NS, BP determine Inbound-IF and IF mapping
Sender Agreement: not reqired
Receiver Agreement: JDBC receiver channel for that Inbound IF, NS and 3rd party BS
BP->File
Receiver Determination: BP IF (abstr), BP IF NS, BP determine the 3rd party BS (File)
Interface Determination: BP IF (abstr), BP IF NS, BP determine Inbound-IF and IF mapping
Sender Agreement: not required
Receiver Agreement: File receiver channel for that Inbound IF, NS and 3rd party BS
Regards,
Udo

Receiver Agreement and Interface determination

Hi
I have an input file that generates two output files. The two output files go to the same interface. One output file will have header and the other will have details. I want to kow how many receiver determination, interface determination, sender agreement and receiver agreements we need to create
Regards

Hi Ajith,
As perception, I understand that you would like to like to split the input file into two as Header and Details. For this requirement, you should need Integration Directory (Configuration) as below:
1. Need to Two Receiver agreements.
2. One Receiver determination.
3. One sender agreement.
4. One Interface determination ( Type: Enhanced)
Thanks,

Updates not needed but marked as important

I have 76 updates marked as imporant but when I click install: "Not needed"
I know that you can do the updates manualy but coz the links are hard to find and sometimes imposible and coz they are 76 I wont do it manualy.
I just reinstalled my Windows and I never had I problem like this before, what can I do?
*Update
I don't know what happened but all the updates were installed... I did nothing just tryed again

Hi,
If you still have this issue, try to reset the Windows Update components to see how it works:
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058/en-us
Alex Zhao
TechNet Community Support

HT4623 My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

My Ipad is saying that i need to type in a Sim code to unlock, but i do not know what it is...I have tried every code i could think of and also the one that it originally was when i received my Sim. How do i unlock my ipad or change my sim pin?

Hi Mikki.J.H,
Thanks for using Apple Support Communities. This article has some information regarding SIM PINs that may help:
iOS: Understanding the SIM PIN
http://support.apple.com/kb/ht1316
Cheers,
- Ari

What do I need to do when I receive the message ". . . your startup disc is full, you need to make some room by deleting some files"

I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
Memalyn

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Invoice Date needs to be date when Customer receives goods

Client when shipping by sea would like the Invoice Date to be the same day the customer received the goods, basically the Pick Up Date even though the delivery might have been 'shipped' from the jetty.
How can this be done? Would the Invoice Date be the Pick Up date?
Sanjib

Hi,
I guess you're asking about OM shipping and AR invoices. If you have invoicing at line level, as soon as you ship a line, OM insert a line into AR interface and this line is ready to be imported into AR. If you ship from USA to Europe by sea it will take about 10-15 days to goods be delivered. As invoice date is defined when you import it into AR, in order to achieve your requirement, you will not be able to import your invoice into AR and will not have info on Receivables. Or do you want to import your invoice into AR as soon as goods are shiped and change the invoice date when customer receives them?
In the first option, you could do the following: define two AR batch sources: AIR and OTHER, for example. The first one will be used to sea shipping and the second one to ground or air shipping. In the first AR batch source, uncheck derive date. In OM, define two order types: OT_AIR and OT_OTHER, one to sea shipping and other one to ground/air shipping. In order type AIR, define AIR as batch source, and in OT_OTHER define OTHER as batch source.
Normally import your transaction with batch source OTHER into AR. For the orders shipped by sea, you will have to import them one by one. As soon as you receive the customer acks, go to ar autoinvoice and import the order received by the customer and define as default transaction date the date informed by the customer.
I know it is not a good solution, so I think you will need some custom to have it done.
Hope it helps,
Ketter Ohnes

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please

I just purchased Time Capsule today. I ONLY want to use it as an external drive. I do not need it for Time Machine. I need to free up room on my computer. As of now, I can't even load updates. I can see the TC in my finder, but when I click on a file or video to drag and drop, I get message that TC can't be modified. Help please!

I agree with Kappy.. passing files and especially via wireless is slow as slow.
Just need to be sure your TC is the new AC model??
And the OS on the computer is Lion?
Have you completed the setup of the TC via the utility? You do still need to get internet via the TC so it has to be plugged into the main router..
Give us the full picture of the network.
Then we can help you get into it.. whether you should put your files on it is another question.

When is Receiver Agreement not needed?

Similar Messages

Maybe you are looking for