When is the 5.8 release planned (looking for OM-D E-M5 Mark II ORF support)

I just purchased an OM-D E-M5 Mark II, and was surprised to see that the ORF file from that camera is not yet supported in Lightroom. I'm assuming that this will be in the next update, which should be coming out any day now, based on the last update being almost 5 months ago.  Does anyone know when 5.8 is planned to be released, and if in fact it will contain the updated ORF support for the Mark II camera?

Of course Lightroom has its own forum.  It's a completely different application with a totally independent engineering team.
The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

Similar Messages

  • When will the version 11 release in "Archived Flash Player versions" website

    Dear Adobe:
         I wonder know when will the version 11 release in "Archived Flash Player versions" website: http://kb2.adobe.com/cps/142/tn_14266.html
    The newest version in this website is 10.3.183.10, as shown below:
    I want to integrate the verion 11 with my project, but I cann't find it.
    And I don't need the debug versions like "Flash Player 11.0 ActiveX control content debugger (for IE)". I need the released version.
    Is there anyone who can help me? Thank you!

    I'm not clear what you meant by integrating FP11 to your project. What specifically are you looking for?
    To get the latest Release version of Flash Player 11, you can go the this site for the browser that you want to update: http://get.adobe.com/flashplayer/
    If you are a Flash Developer you might want to grab debugger build from here: http://www.adobe.com/support/flashplayer/downloads.html
    Hope this helps

  • Trying to load flash file in iWeb and when I enter info in the "html snippet" box a "missing plug-in" message comes up (although i have adobe flash player in, if that's the plug-in they're looking for). Anyone have any similar problems or solution. Thanks

    I'm trying to load flash file in iWeb and when i enter info in the "html snippet" box a "missing plug-in" message comes up (although i have Adobe Flash player installed, if that's the plug-in they're looking for). Anyone have any similar problems or solutions. Thanks

    when i publish my site and vew it the page on the web it just comes up with the file name w/ the ,swf and the "mising plug-in" message below. if i click on the file name it displays the flash file but gigantic (the entire height of the page).totally perplexed!
    anyway, here is the code.
    <object classid=”clsid:D27CDB6E-AE6D-11cf-96B8-444553540000”codebase=”http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0, 40,0”width=”244” height=”221” id=”ETrade_banner_Gumby_replay”><paramname=movie value=”ETrade_banner_Gumby_replay.swf”><param name=qualityvalue=high><param name=base value=”.”><embed src=”ETrade_banner_Gumby_replay.swf”quality=high width=”244” height=”221” name=”ETrade_banner_Gumby_replay”align=”” type=”application/x-shockwave-flash” pluginspage=”http://www.macromedia.com/go/getflashplayer”base=”.”></embed></object>

  • When is the new iPhone release date?

    When is the new iPhone release date? And which is it ?

    Apple has not announced any new iPhone, & speculation about future Apple products is prohibited on this forum.

  • Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone?   I'm looking for some that glow or light up so they can be seen when I walk in the dark.

    Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone?   I'm looking for some that glow or light up so they can be seen when I walk in the dark.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I bought my iPad from an Apple store, so when will the ios  7 update come through? Or, when is the update being released?

    I bought my iPad from an Apple store, so when will the iOS  7 update come through? Or, when is the update being released?

    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base before you post a question.
    Regards.

  • When will the Super Bowl be made available for viewing?

    when will the Super Bowl be made available for viewing?

    the announcement will be made (or not) when the update is pushed.
    Looks like the “or not” was correct. It hasn’t appeared in Software Update.
    But, it pops up down at the bottom of the related threads:

  • Unable to release planned order for single line from MRP workbench

    Hi
    We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
    User want to release a specific line but no new requisition is generated
    It is highly appreciable if anyone could help to resolve this issue
    Appreciate the Help
    Regards
    VKPK

    It sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org

  • I have a question that I think I know the answer to, but am looking for confirmation.  I have a dell computer at home that has clip art available on it for putting pictures into documents.  Do I need to install an APP to get something similar to clip art?

    I have a question that I think I know the answer to, but am looking for confirmation.  I have a desktop computer at home that has clip art loaded onto it.  I recently got an iPad and am looking for something similar.  I assume I need to get an APP for it, and if that is correct, does anyone have one that they like?

    Sort of.  There is an app called art shop that gives you a place to park clip art.   But I don't think you really need it. 
    If you have a collection of clip art you want available, move it to the camera roll on your pad/ phone, then copy paste into your document the clip you want.
    You can get them into the camaera roll by putting them in a single event in your picture library and syncing them over,  or e mail them to your self, and save to the camera roll, or send them to drop box, and bring them down that way.
    The challenge is getting them all in one place to make it easy for you to find, which is why syncing might be the best approach in the long run.
    As near as I can tell there is not a ready made clip art collection in app format laying around.

  • I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
    Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

  • Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

    Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
    I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

    Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
    Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
    You don't like it.
    You've heard it recently and don't want to hear it now.
    Simply don't want to hear it at this time.
    For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
    For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
    For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
    As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
    I'm not trying to be prescriptive, just giving you food for thought.
    (They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

  • I dont know if im in the wrong place but Im looking for a white MacBook Pro

    I dont know if im in the wrong place but Im looking for a white MacBook Pro, I was told the white is cheaper but its not advertised anymore so I had to talk in here to get info? Can somebody please help.THANKS!
    <Email Edited by Host>

    Click the grey store tab at the top of this site & compare for yourself. 
     

  • Error when reading the access data(URL,user, password) for Adapter Engine

    Hi,
    We are getting this error in production system 
    "SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
    Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
    Its urgent.  We are in support project.
    regards,
    john

    Hi jhon,
              please check the following threads to resolve the problem.
    AE_DETAILS_GET_ERROR
    Error : no_adapter_engine_found: Unable to find Adapter Engine
    regards
    mahesh.

  • When Will the Adobe AIR 2.5 Extension for Dreamweaver CS5 Be Available?

    To Adobe AIR Development Team,
    When will the Adobe AIR 2.5 Extension for Dreamweaver CS5 be available? If it's already available, where can I find it? If not, when will it be available?
    Thanks!

    Thanks i will iinstall again
    WOW Extension for Dreamweaver CS5!
    Air 2.5 Extensions for Flash Builder 4.4 / 4.5x ???
    Thanks merry xmas, SnakeMedia

Maybe you are looking for

  • Receive an ORA-01403: no data found error after importing

    After making changes to an application and exporting it and importing it into another applications (copy of the app) on the same server I recieve this error. Error Single Sign-On Procces Failed However if I export and import the application to a diff

  • Errors when generating a adobe form in report

    Hello, I have a problem with the solution of the errors to generate an adobe form. I put in a situation: - I need to create a form with several dinamic tables, each below the previous. For each dinamic table, apart from the header row (column titles)

  • External Table Help

    I have created an external table but when i try to select data it seems to be empty, where could be the problem? Thanks

  • Boot Into Windows or LInux Directly with rEFIt

    Hi, I'm installing Linux on my MBP. How do I setup the GRUB so I can boot into Windows or Linux directly without having to "--> Windows --> Windows or Windows --> Linux THanks.

  • Doubts in F4 help

    Hi, I want to attach value help to a field. I also want to make that field as non-editable so that the user chooses only from F4 help. So i made an input field as non-editable and attached a F4 help to it. But when i try to choose value from the F4 h