When is the actual date for FSC HD availability?

Anyone from verizon FiOS - please advise the actual date of Fox Soccer Channel HD availability date.
Or at least the aproximate date
Thanks

Not a Verizon employee but Verizon almost never announces in advance when something will be deployed (new channels, IMG, or whatever).
Best answer is when you see it in your guide then that will be the date (and not trying to be a wise guy, just relating 4 years of experience).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

  • Error when reading the DDIC-data for table

    Hi Tobias
    We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
    To test initial load, we stopped replication for an existing table and then started replication for the same table.
    Mass transfer id connects ECC system to BW on HANA system.
    Replication errored with the following message:
    Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
    Looking for your guidance.
    Kind Regards
    Kamaljit Vilkhoo

    Was able to solve using oss note 1972533.

  • When is the release date for the 5th generation iPod touch

    When is the release date for the 5th generation iPod touch?

    Nobody knows (except for apple of course). All it says on the ipod touch page that it ships in October so it could be any date. I predict that it is in the first two weeks of October but when it says buy it now instead of pre-order you know its about to come out.

  • When is the release date for Windows 8.1 update?

    When is the release date for Windows 8.1 update?  You know I pay my bill every month so that my carrier can provide me with the best service.  And yet, I don't see any improvement in my service.  It seems like Windowsphone is an inconvenience to Verizon and that is the way they seem to be treating Windowsphone users.  Do you have the new Windowsphone in stock?  No, but it is available online.  Do you have any Windowsphone cases?  No but they are available in the the color you want online.  Screen protectors?  No the 928 screen protector will not fit the Icon, but let me cut up this other one and make it fit.

    This is the information I received via chat with customer service.  We aren't all hearing the same thing.
    >> Chat transcript removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • Error when reading the access data for the Adapter Engine

    We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.xpd.dbcixpd</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Pls suggest if anyone has gone thru same problem.
    Regards
    Amar

    I got the same problem while using RFC lookup.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.tx1.netweaver</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Any idea ,when we get this error usually.

  • Where  can i find the actual data for SKC1A

    hi experts,
    my doubt its about  a program that i have to check , but it has a "get skc1a" and it returns some values, some of the appears to be incorrect but i want to see the actual table for the data, because sk1ca its a structure.... the logical db is SDF.
    i looked up to GLT0 but there aren't the fields UM01K, UM02K, UM03K......and these fields are the ones that have some data that i want to know where they get it from???
    please i really apreciate the answer...
    thx in advance

    please chek fm
    READ_SKC1A
    READ_SKC1C
    a®

  • I would like to know when is the precise date for iPhone 5's release in the UAE

    when is iPhone 5 officially released in UAE....
    and what are its approximate prices

    This is not the iPhone forum. If you'd looked there, you have learned already that we are all just fellow users here and have no idea when the iPhone 5 will be released in any country where Apple has not yet announced a date. Keep in touch with the cell carriers in the UAE; they'll know the release date as soon as anyone will. Or keep checking the online Apple Store for the UAE, where Apple will, I'm sure, post the release date as soon as it's set and announced.
    Regards.

  • HT1689 When is the release date for iPhone 5?

    When is the iPhone 5 releasing?
    Is it Really gonna release?

    There has been no announcment about any new iphone at all.
    Rumor and speculation is not allowed here.

  • When is the release date for Firefox on Windows Phone? (Specifically the 'phone of the year' - the Lumia1020). Thank you.

    New to the Windows Phone environment (former Apple fanboy/big Android fan)... the Lumia1020 had such an amazing camera, I had to switch. And it's incredible. No regrets so far...I really am surprised how much I like the WP interface... the live tiles/customization is incredible... and they are starting to get all the major apps now (obviously no where near the selection as the competition, but enough of the big ones where I can still function as I did). Sadly though they are still severely lacking in this browser category. Internet Explorer is too slow. Whoever comes to market first - Firefox or Chrome is going to have a monopoly on their hands going forward... I'd highly suggest you get a team of developers and start working on an app as soon as possible. It's a win-win for everyone!
    Thank you

    Currently there are no plans for a version of Firefox for Windows Mobile.

  • Will there be a RAW plugin for Elements 12 supporting the Canon EOS 7D MkII - or when will the DNG converter for this be available?

    I've just bought a Canon EOS 7D MkII but cannot open the RAW files in Elements 12. I also can't use the latest DNG Converter to convert them - will either option become available and if yes how long is it likely to take please?
    Thanks, Sarah

    Hi,
    The Canon 7D Mk II is currently not supported by any version of camera raw.
    It is expected that Camera raw 8.7 will include support and we are hoping that it will be released soon.
    PSE 12 has ceased to be updated - you will either need to update to PSE 13 or use the DNG 8.7 converter (when it becomes available) to convert the CR2 files to DNG files - PSE 12 will then beable to use the DNG files.
    Brian

  • When we get the actual data in BPC for planning, is the data consolidated

    I had a question regarding Planning. When we get the actual data in BPC for planning, is the data consolidated? Do we need to run the consolidation business rules( IC Booking, Matching, IC Eliminations) on the data before we can use it for planning? Per my understanding we have to run Currency Conversion on this...correct?
    Also, where do I get my actual data from? Does ECC/ Source system have data from all entities( CHQ, Region and Countries)?
    Please help!
    Thanks in advance

    Hi Kimi,
    In a hierarchical structure, the data is always loaded in to the base level, and the data is automatically rolled up to its parents.
    The currency conversion will also take place at the base level, and as mentioned earlier, the converted data will also be rolled up as per the hierarchy.
    The heading of this thread says planning. So, ideally, there wont be any legal (or statutory) consolidation. You might use the US elimination however, for eliminating the intercompany transactions, if any.
    The planning can be done as zero based (wherein the user has to enter the planned data manually from scratch) or non-zero based (wherein the planned data of previous year is copied and the user can change the data as required).
    The flow of events cannot be suggested by us. It has to be discussed with the business to understand how do they do the planning.
    Hope this helps.

  • In Aperture 3.4 Export Slideshow to a video, what are the actual Data Rates used for "Best", "High", ... "Least" quality for a given resolution?

    My Photo website host (SmugMug) converts uploaded video files at a specific Data Rate in Mbps before installing them. I would like to compress my slideshow video file to the same rate before I upload it to reduce file size and upload time. When I choose the "Custom" setting for an Export, I can choose 1 of the 5 Quality choices and see the estimated file size. But, I cannot know what the actual Data Rate is until after I wait a long time to export the slideshow (hours for a long slideshow) and then examine the resulting file in QuickTime Player's Inspector.

    I ran a few tests using a short slideshow (16 images, 1:23 mins/secs) at 1,728 x 1,080 resolution to find out the bit rates for various quality level choices.
    Export setting              Quality          Resulting bit rate          File Size
    HD 1080p                    default                20.68 Mbps              214.8 MBytes
    Custom                       Best                   20.49                       212.8
    Custom                       High                     6.25                         65.0
    Custom                       Medium                3.97                         41.3
    However, I don't know if those bit rates will be the same for different length slideshows or for different output resolutions. My SmugMug host site uses an 8.0 Mbps rate for a 1728 x 1080 video file. If I choose Custom/Best, my file will be almost 3 times bigger and much higher quality than necessary, but if I choose Custom/High, my file will be smaller and lower quality than SmugMug's converted version.
    I have installed MPEG StreamClip that will let me convert an exported Aperture slideshow video file, and StreamClip allows me to choose a specific bit rate in Mbps. But, I would prefer not having to do a 2 step process (Export from Aperture, then convert in StreamClip).

  • To know the actual date & time for created versions in cprojects

    HI ABAPers,
    Am working on cproject version 3.1,  wanted to know where the  exact date & time  is getting captured when a version i.e
    con H & base  versions is created in cprojects ( collaboration projects ).
        Already i have checked in  dpr_project table where versions are getting stored with the same project created date & time. But not with the actual date & time when the versions were created. 
    is there any BAPI or table where we can know the actual date & time of the created versions.
    Thank you!!!
    Abdul

    Hi,
    According to your post, my understanding is that you want to change date format for ‘Created’ field in the getVersions web service.
    Per my knowledge, you can get the date format for ‘Created’ field as “MM/dd/yyyy HH:mm a”.
    For more information, you can refer to:
    Versions.GetVersions Method (Versions)
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

    I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI"  I
    am so disgusted,please help!!!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Error when reading the access data(URL,user, password) for Adapter Engine

    Hi,
    We are getting this error in production system 
    "SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
    Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
    Its urgent.  We are in support project.
    regards,
    john

    Hi jhon,
              please check the following threads to resolve the problem.
    AE_DETAILS_GET_ERROR
    Error : no_adapter_engine_found: Unable to find Adapter Engine
    regards
    mahesh.

Maybe you are looking for

  • Intricate questions regarding update to Mavericks (ProTools, Final Cut, etc.) 2011 MacPro

    Hello people. I rarely use the AppStore, as my machine is primarily used for Final Cut Studio 2 and ProTools 9. I still have OS 10.6, and for the first time, I saw the message "This app requires 10.7 or later" I know your first reaction is going to b

  • Xferring my license from pc to mac

         I have cs6 for pc..however I've made the switch to the dark side, and got myself a macbook pro with a wondrous screen...I would like to transfer my license from pc to mac edition, I know this can be done with current versions however I can't see

  • PE4 - Data restore - lost links for  a project

    Let me start by stating that I am a newbie at Premiere and video editing in general.  I recently had a hard disk failure, but lucky for me I did have a backup.  When I restored my data, much of the file structure was lost, even though I have the file

  • Scaling 16 x 9 video into a 4 x 3 sequence is producing fuzzy video.

    Hello, We are a small ad agency in Phoenix, AZ and what we are experienceing is we shoot on a Canon XL H1 in 16x9 mode. I edit in a 16x9 sequence and everything works beautifully. However when it is time to go to BetaSP to send to the TV stations i h

  • Combining Output for 2 Invoices

    Hello All, I want to create a progarm that can send an email with an attachement of single PDF for multiple invoices. The output is configured using Adobe Forms. I am able to get the output of each invoices in XSTRING and SOLIX(to be attached to emai