When is the date for ios6 to release

im just wondering whats a exact day for ios6 to release ??

Historically iOS release time is always 10am (Pacific Time Zone)- San Francisco and Nevada. So India get ready for iOS 6 at 10.30pm today on 19th Sempember. Sorry for the previous time adding problem. India is 9.30 + PST .

Similar Messages

Problem with interface - when send the data for PA0002

Hi Gurus,
I am interfacing employees data from one system to another system with all the PA infotypes.
we are using the fuction module " HR_MAINTAIN_MASTERDATA " to upload the master data. Here the problem is, when we send the data - in destination system all the segments have the data correctly . But middle name is not loaded in to the system. Problem with only middle name.
But, here strange thing is, when i resend the idocs it is laoded correctly all the fields with middle name also.
I am unable to figure out the problem .. Please let me know if you have any advise on this ..
Thanking you.
Regards,
Giridhar Pujari

Hi Sikindar,
Technical name is corrent .. and once you resend the idoc, you can't see the problem again.
Regards,
Giridhar Pujari.

No Drop down Calendar Window when entering a date for a new event.

Hi
Hope someone can help with this annoying problem.
In ICal when entering the date for a New Event a little window would pop up showing the month that you were creating the event in, you could then click on the date you required in the calender and it would then update the 'From' date field in your event. You could then do the same for the 'To' date field this was all very neat and fast, you could create event verys easily.
However since upgrading to Snow Leopard this has stopped working and I can't see why.
Does somone have answer ?
Currently this works OK when using ICAL in MobileMe.
Before I updated my iMAC to Snow Leopard recently but it seems that
NOw when am s

Have you figured out a solution to this? I am frustrated as well by lack of this feature.

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Problem when recording the data using BDC for Tcode CJ02.

Dear Experts,
When i am trying to record the data for TCODE : CJ02 i need to enter the project Definition and enter the WBS element it takes me to the screen then i should select the WBS element and attach a file for that selected WBS element . The option for me to attach the attachment of file will be available on the application area(Services for the Object).
Now the problem when i try to do recording in SHDB this option like create attachement is not visible in the recodring . Kindly suggest me what can i do such that i attach the file for the particular project def and WBS element.
Either suggest any function module or other procedure .......
Regards,
Sana.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

What is the date for final release of JAXB ??

Guys, I am trying to find the date or month of release of final jaxb version(non beta). I tried searching sun and net, without any luck. This is such a premitive information, and i am not able to find it. This is driving me nuts !! Please help me, if you hold any informationin in this regards
All help appreciated
Thanks
Rakesh

Some recent issues using JAXB. I will post it as a new thread..
1. Dramatic increase in response time, compared to its previous version. Atleast 30% increase in processing time using this new beta !
2. Limited support to DTDs? Compared to the previous version ???
This is what i get(Same DTD worked fine with my previous version):
[xjc] DTD is attempting to declare xmlns:... attribute. All namespace-related validation are skipped.
[xjc] line 5 of test.dtd
Here is line 4 and 5 of my DTD
<!ELEMENT CG_hdr (Header)>
<!ATTLIST CG_hdr xmlns:xsi CDATA #REQUIRED>
3. Limited support to XSD ???
This is what i get, when i try to use a xsd schema and run the generated source. :(
[java] DefaultValidationEventHandler: [ERROR]: Unexpected element {}:Routing
[java] javax.xml.bind.UnmarshalException: Unexpected element {}:Routing
My xsd code:
     <xs:element name="Routing">
          <xs:complexType>
               <xs:sequence>
When I have single Routing element in my XML, it works fine. When I have multiple routing elements, it blows offff !!!
I need to get this thing working ASAP.
Bhakti(or any one else good in jaxb) can you call me or share your contact information, so that I can discuss this issue?
My contact :
281.927.3376 (O)
email: [email protected]
messenger: [email protected]

When was the current model of macbook released?

Hi everyone,
Does enybody know when the current model of macbook was released? I am about to order one, and I just wanted to know how old they are.
While on the subject, where could I find historical dates for previous hardware releases?
As ever, thank you for the wealth of information out there and those who share it!

Allanfrance wrote:
Does enybody know when the current model of macbook was released? I am about to order one, and I just wanted to know how old they are.
MacBook (13-inch Mid 2007) 05/15/2007
While on the subject, where could I find historical dates for previous hardware releases?
http://support.apple.com/specs/ This only goes back to 1997. There are other sites that have a better record.

When will the next T Series be released?

When will the next T Series be released?
What will continue on from the T430s? Is it the rumoured T43S1?
Estimated dates?
ThinkPad T420s (4174-HG6) i5-2540M 8GB RAM, 320GB HDD
ThinkPad T430s (2356-GDG) i5-3320M, 8GB RAM, 500GB HDD x 2

3rd strike coming up I'd say. Pretty well guaranteed especially with Windows 8 as well on top of it. The 530 release has not been smooth for some reason. I'd say good luck but I'd hazard a guess it will be bad. Oh well you're one of the few pushing the envelope.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Ü Character being replaced ? when writing the data to CSV from DB in Linux

Hi All,
Can anyone help me in understanding the exact cause of my issue
Issue Description: Ü Character being replaced ? or when writing the data to CSV from DB in Linux.
Shell used: ksh
Actual string: MÜNCHENER RÜCKVERSICHERUNGS-GESELLSCHAFT AG
Output String: M?NCHENER R?CKVERSICHERUNGS-GESELLSCHAFT AG
locale ouput:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Environment variable set: NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
Linux Version: 2.6.18-128.el5 128 bit
java Version: 1.6
Oracle DB version: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
When i query directly from DB i get the data in right format but when i write the same data to a csv file then the above problem occurs.
Can anyone please suggest me what could be the cause for this issue?
Regards,
Shiva

Hi Srini,
We are using Java based ETL specifically written for our application. we are using sqlplus to make DB connections. am using vi editor to see the data. After the Extraction process the data processed in also in the wrong format.
Regards,
Shiva

When is the os x leopard being released ?

when is the os x leopard being released ?

Backup first
It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
Erase before the install
Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
During the install
Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

How do I perform a trigger that collect the data for every rising edge continuously and then automatically put the data in a .xls file??

I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
thanks a lot.

LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
s to make the application you desire.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

When is the date for ios6 to release

Similar Messages

Maybe you are looking for