When is the error message going to be fixed????

I keep on getting an error message that many of you are getting.  I have e-mailed Verizon and also gone into the stores.  The corporate store said they can't be of any help and I have to do everything on line........Come on, my message to Verizon was over 6 hours ago, I have spent about 6 hours since midnight trying to fix this.  With several computers, 4 browsers and nothing..... HELP!!!

So Firefox is leaving you in "the lurch" because you installed a POS toolbar which is supported by freecause.com which doesn't have its' act together enough to make sure that their security certificate is up-to-date??
Firefox is doing its' job by alerting you to the out-of-date certificate! You need to figure out what extension you have installed which is causing that message, and disable that extension until the certificate is replaced by a current certificate.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Similar Messages

  • When is the iMessage activation going to be fixed?

    I am still waiting for iMessage to activate. Anyone got any up to date remedies or is there a statement from Apple?

    Let me clarify - my iMessage works with email addresses, but not with my phone number.
    As I understand the iMessage/Facetime phone number activation it follows this process:
    Your phone looks up its location using time-zone settings
    It then sends a request via Internet (wifi or cellular) to Apple's local servers
    It waits for an SMS to come back from Apple's servers with a key
    It sends the key from SMS back to Apple's servers
    Your phone number is now linked with your imessage account
    To me this suggests that my carrier (Telstra Australia) is blocking the SMS with the key in it.  In the UK a lot of users of O2's TuGo service (which is a phone number/text message redirection service) are having these issues because TuGo is screwing with the texts.  If it is the case that Telstra is blocking the text message (they may have some kind of spam rejection thing in place), then it's probably going to take Apple talking to Telstra to stop the blocking.
    Alternatively it means that the Apple servers aren't sending/accepting the keys which would require Apple's intervention.
    Either way I think the best hope for an enduring resolution is to follow http://support.apple.com/kb/ts4268 and then contact Apple, and explaining which carrier you're on when your issue is escalated.

  • When is the usage monitor going to be fixed?

    I have been getting this message for months now,
    "The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
    When is this going to be fixed? how many other people are getting this message?
    Regards,
    Frogman

    I get the same message as you ukfrogman 
    Only been on BT Infinity for a couple of weeks. Had the usage monitor for the first few days, then it dissapeared and I now get the same message as you.
    Cant say that I am too bothered, as I am not on an unlimited package

  • When is the 'OMIT' bug going to be fixed?

    Hi, gurus,
    I mean that bug that if a string contains 'OMIT' this part is not displayed in reports.
    Ok, I've seen this bug reported 2004, also September 2005. Someone answered that this bug is planned for a future release.
    I am using HTML DB 2.0.
    I don't really think that reserved words of any kind should interact with real data from any field. I've also seen that it is been kept for compatibility reasons.
    So, my question is either when is it going to be fixed or is there a way to surpass this problem temporarily.
    10x in advance!

    Given that "will not charge you for going over your usage limit this month", why would you want it fixed?  It sounds like you've been given a free upgrade to unlimited broadband!
    More seriously, BT's systems are incredibly flaky, and I don't suppose anyone really knows when it'll be fixed.

  • When is the maps app going to be fixed?

    The new Maps app powered by TomTom is horrible. It couldn't find a restaurant that my wife's google maps found on her iPhone 4S. Then it gave me directions to a friend's house; but tried to give us a shortcut off road through the woods. Really? I was in a car, not a 4-wheeler. Basically I no longer have a GPS on my phone. What a waste. I hope Apple realizes they messed up and will go back to the very reliable Google maps app.

    Given that "will not charge you for going over your usage limit this month", why would you want it fixed?  It sounds like you've been given a free upgrade to unlimited broadband!
    More seriously, BT's systems are incredibly flaky, and I don't suppose anyone really knows when it'll be fixed.

  • When is the volume problem going to be fixed?

    I'm new to the world of Macs (just bought in January) after 15 years of PCs.
    Just wondering how it works in the Apple universe - how long does it usually take for bug fixes to come out?
    It's only been a couple of days but I am already tired of volume setting 1 being acceptable to slighty quiet (depending on the application). It is very annoying to not be able to reduce the volume any less than that - for example if someone wanted to be on the phone in the room with me, I would have to mute the sound rather than just being able to turn it down like I used to.
    I don't necessarily need it down to the same level as before but some reduction is needed. Not everyone uses their Mac in a noisy office!!
    iMac 20"   Mac OS X (10.4.9)  

    I'm not sure what you're talking about here. In my quiet home office, I can barely hear the system beep or iTunes music -- sometimes not at all, depending on the song -- with the system volume set to the lowest setting. Slightly below medium is acceptable for me. You probably have some other sound output setting that is interfering. Are you using external powered speakers with the volume jacked up? Or perhaps you need to change the various output settings in the Sound pane of System Preferences?
    Regardless, I don't think you should be looking for a bug fix here, because unless there's some new bug in 10.4.9 (I'm still at 10.4.8), there's no bug here, AFAIK.

  • When is the Flash issue going to be fixed in Lion?  Freezes every time...

    I can't even load the YouTube website without my entire computer coming to screeching halt.  I have to hard reboot my computer everytime.  Doesn't matter if the youtube video is embedded in another website as long as its a flash video it crashes my computer now that I have installed Lion.  HELP..!!

    I may be the only one with this issue and if so then I apologize for mis stating the question.  However, my iMac is less than 2 weeks old and as soon I upgraded I had the issue.  I also saw the same issue listed on MacRumors which lead me to believe that others are aware of the problem.  I just downloaded flash 11 beta and am no longer having that issue.  Perhaps it is specific to the 21.5 inch iMac's i'm not sure.  Hopefully others with similar issues will try the beta and at least be able to surf content without crashing.  Thanks again for everyones quick responses. 
    PS.  I don't care about Flash either and wish it would go away. 

  • PSE 8 - How do I fix the error message: An error has occurred reading files or writing to disk...?

    Hello
    I am using Photoshop Elements 8 on Windows 7 (64 bit). I have all my photos stored on an external hard drive connected by usb. The photos were transferred onto the HDD from a Windows XP machine. I bought a new computer  so I installed Photoshop 8 and imported all my photos to the organiser from the HDD. I have also taken some photos yesterday which I have uploaded to the HDD.
    Now, when I want to delete a photo I check the box to say I want it to be deleted on the hard disk and I get the error message: 'An error has occured while reading files or writing files to disc. The disc may be full or there may bea problem with the source media.' This does not happen with the photos I uploaded yesterday, only the ones which were put onto the HDD from the XP machine.
    Please could someone help? I have tried the File>Catalog> repair and optimise functions. I have reinstalled the software. It still does the same.
    Thank you in advance
    Dave

    David GW wrote:
    The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
    Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
    You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
    When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing.

  • How do you fix the error message, An error has been encountered while writing the current CD list.

    The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to? The message came up half way through writing Track 5. So I selected a second set of tracks and got the same error message, this time at Track 3. I tried to play written CD (imation CD-R 1x 52x 700 mb). Opened the tracks using Windows Media Player. First time I was able to play one or two tracks, next time Window Media Player gave me the error message error message C00D0FAB. I have twice before successfully recorded the tracks using a Rode Podcaster, mixed them down and successfully wrote two version of my audio book. Now its not working. Any solutions?

    David GW wrote:
    The error message goes on to say, Please check your device settings or consult your device documentation regarding resolving writing errors. Which device do you think they are referring to?
    Sorry, but I would have thought that this was rather obvious! The only device capable of being written to under these circumstances is your CD drive; after all, it's a CD you are trying to create...
    You have two potential major causes of problems here. The most common cause of these difficulties is the disks themselves - you only need a batch with poor reflectivity to cause all sorts of read errors, so that's the first thing to try - using a different brand of disk to write to. The second thing you have to realise is that CD writers have a finite life - the lasers in them simply don't last for ever, and towards the end of their lives the power behaviour tends to be a bit erratic, and it tends to fall off somewhat - which causes the same sorts of errors, simply because the dye doesn't get evaporated efficiently. This causes mis-formed pits, hence the read errors. The only solution here is to install a new drive.
    When it comes to reading, commercial CDs have a much higher reflectivity than ones you write yourself, so often these will play whilst your own will fail - a common cause of confusion, this. But it's worth checking; if you get failures to reproduce all of the tracks from a commercial pressed CD, then almost certainly your drive is failing.

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • I get the error message "unresponsive script" when I try to open Firefox, and then I can only delete the message by going to Task Manager.

    After I downloaded the Firefox update, when I tried to open Firefox I got the error message: "Warning unresponsive script...etc". This happens every time and the choices in the message ("continue" etc) are unresponsive. Further I can't delete the error window without going to Task Manager to end the program. The problem also disabled Internet Explorer which will now simply not load. Google Chrome is working. I assume it relates to the update since the problems (for both Firefox and IE) occurred immediately after the download.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

    I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web.  Which is currently unavailable and doesn't work.
    Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
    Has anyone else had this same problem, and if so, how do we fix it....???  My next move is a phone call, but those haven't always been very productive.
    If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
    Thanks in advance.
    Karen

    Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain.  Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech.  They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....  
    Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method. 
    I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
    Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered. 
    I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text.  The way my luck runs, they won't offer one for a decent price.  The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.  

  • My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect.

    My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?

    Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store.  Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
    Rob

  • I bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

    i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • I recently transferred my itunes library to an external hard drive. Now I get the error message 'the original file could not be found. Could you like to locate it' when i try to open songs. My iPod syncs ok.

    I recently tranferred my iTunes library to an external hard drive. Now I cannot open songs and get the error message ' The song "***" could not not be used because the original file could not be found. Would you like to locate it'. This applies to all 9742 songs!!. My iPod still syncs ok, but I can't play songs on the PC. Can anyone please help.

    It would help to have more background about your iTunes collection such as if you keep it on an external drive, or if you have moved or renamed anything recently.  iTunes is very sensitive to you renaming or moving files or folders involved with your media.  iTunes only keeps a reference to where a media file is located  and then goes to look for it when you try to play it. If you have changed things since it was added to itunes then it's like me sending you to look for a friend in my addressbook but that friend has moved.
    The other possibility is your computer is starting to lose files.  Again, the computer uses a reference database to tell it where on the drive to look for a file. If that database gets corrupt then it starts losing files.  Use Dsk Utility's first aid to verify your hard drive.

Maybe you are looking for

  • Error deploying logon.par

    Hi Experts, I am trying to change the portal logon screen. I followed the insstructions in the documentation to modify the com.sap.portal.runtime.logon.par.bak I exported an par file from nwds and copied to the apps\sap.com\irj\servlet_jsp\irj\root\W

  • Repository Connection Error: Causes and Solution?

    Hi All- We are facing the following error frequently when working with OWB client 11gR2:- Repository Connection Error: The connection to the repository was lost, because of the following database error: Closed Connection. Exit OWB without commiting C

  • "No OS found" message during BootCamp; how to proceed

    In Bootcamp after downloading the support software onto USB I continue to installing Windows.  After selecting the partition size, i hit continue, computer than turned white.  and then now get b/w screen with "Press Any Key to Boot from CD or DVD  Mi

  • Installing Airport Express

    I can't install Airport Express on my Mac. It says "you cannot install Airport on this volume. The Version of Mac OSX on this volume is not supported" The Airport disc says 10.4 or higher is required and I'm running 10.5.6.

  • Fuzzy searching and concatenated datastore query performance problems.

    I am using the concatenated datastore and indexing two columns. The query I am executing includes an exact match on one column and a fuzzy match on the second column. When I execute the query, performance should improve as the exact match column is s