When is the HomeFusion firmware upgrade and higher datacaps coming??

Was told that end of February that the firmware upgrade to correct the daily disconnects with the HomeFusion hardware was going to be rolled out. Nothing as of yet.
Also want at least 50GB of data for the $120 per month package. There's no way 30GB will ever be enough for a family of 4 in a 1 month billing cycle. Hell even 50GB would barely cover it.
Time to end the illusion that datacaps are in place for network congestion and that it's all about screwing the customer out of more money. A residential LTE connection should not cost anyone $120 plus taxes and fees and another $100 for the 10GB in overages on a ridiculous low amount of data allowance.

I think 150 GB/month where we should be at for $120.00/ month. I mean a fixed lte home service . 50 GB for $90/ month and the $60/ month plan should be 30 GB ill keep dreaming lol.
P.S. I called yesterday about the firmware now its planned for mid march this does suck.

Similar Messages

Had a problem with the last firmware upgrade and now have a delayed startup

I made the mistake of doing the firmware flash while the MBP was docked. I don't thing it was successful although it shows the right number. My startup time is about two minutes which is unusual as it used to be super fast (using an SSD). Any ideas?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

When I am due to upgrade and decide to go with a different carrier, since i am the account holder what happens to the 4 people on my plan with me? do they have to pay cancellation fee?

when i am due to upgrade and i decide to go with a different carrier, since i am account holder what happens to other people on my plan, due they have to pay cancellation fee?

Just your line that is ported gets the Early Termination Fee if you are still in contract.
If you keep the other lines active you are still responsible for them.
Good Luck

When is the next firmware released after v21.0.016...

When is the next FW upgrade after V21.0.016 which hav known bugs reported . I hope nokia to rectify it in next FW near soon.....My N95-1 getting slower & slower in response...when boot up it takes 15 minutes, some phone pre-installed function like Nokia Search, Dictionary, WLAN (wifi) already hided inside the phone (cannot see their icons), when receiving calls , i cannot see the loudspeaker function to be on...Video centre cannot be added anymore new services...& many more ...i only used up 3GB data for my Sandisk 4GB card...my phone still hav 58MB space left...i cannot imagine what will happen if more problems coming...

Your problem is elsewhere, not with the firmware.
How many themes and third-party applications have you installed? Did you install them into the phone's memory or the memory card? If your phone takes 15 minutes to start up there's a serious overload somewhere.
Regardless of that, nobody knows when new firmware is due out. It just appears. The thing to do is to check on http://europe.nokia.com/A4577225 periodically.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

HT4623 when is the iOS 7 upgrade available??

when is the iOS 7 upgrade available??

What utter rubbish. That is just local timings for the US telling you the time differences between the East and West Coast.
I don't know how many more people can post here to make it clear for the iOS 7 will be released on 18th September and you will be able to get it wherever you are.
Why not do as I have already suggested and watch the announcement for yourself from Apple by clicking on the link to the keynote from the front page of the Apple website?
Can't make it any clearer though that iOS 7 will be available on 18th September.

HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any sugg

I turned my iphone off when visiting the doctor's surgery and now it won't turn back on. It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens. I have taken out and replaced the sim card too. Any suggestions

If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
Best of luck.

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service

Hello,
I'm new to web services - trying to import a WSDL that was created by an outside vendor and placed on a company server. I imported a previous version successfully. The error I'm getting doesn't make a lot of sense to me, here it is:
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't generate files.
Possible reasons are:
1. The output file(s) might be read-only.
Remove the read-only attribute and import the Web service again.
2. A proxy DLL that LabVIEW created under the same file path exists in memory.
Restart LabVIEW and import the Web service again.
I don't see any read-only attributes on the output files and I've tried restarting LabVIEW - no luck. Any help is greatly appreciated.
Thanks,
Al Rauch
Merck & Co., Inc.

Aaron,
I was able to successfully import and run the web services from the WSDL file in question in LV2009 on a different computer than the one on which I had the original problem. Unfortunately I am still having the original problem on the project computer and will need to get it working there . . . still looking for a solution to that. Apparently LV2009 is perfectly capable of importing and running this WSDL file, but there is something still in the way on the project PC.
Thanks,
Al

When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?

When deploying the new CU4 x64 and x86 users see that the install is happening. How do I prevent them from seeing this?
Thanks
James A+, Network+, MCP

If the program settings are set to hidden, it should be hidden. You do not need to specify any client settings. If you changed the program settings and the machines already had policy, you will have to wait up to your 60 minute policy setting or just manually
kick off a policy update to see the new hidden program.
If they are still getting the interactive install, then you need to troubleshoot if the machine has gotten proper policy. Run a 'Machine policy retrieval and evaluation cycle' manually, wait a few minutes and then test again.
Suppress program notifications are the tray icons and bubble notifications about installations happening. Hidden is the method in which the executable/msi will install.
Daniel Ratliff | http://www.PotentEngineer.com |
@PotentEngineer

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

Just tried to install the latest firmware version and the screen has been grey for the last 30 mins

Just tried to install the latest firmware version and the screen has been grey for the last 30 mins, any ideas what to do now?

..Step by Step to fix your Mac

HT5037 I installed the iphoto library upgrader and iphoto still will not open

I installed the iphoto library upgrader and iphoto still will not open. can anyone solve this?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I downloaded quicktime 7 to my pc and I purchased the quicktime pro upgrade and have a registration key. How do I upgrade it

I downloaded quicktime 7 to my pc and I purchased the quicktime pro upgrade and have a registration key. Now how do I upgrade it.

Go into the preferences and there will be a tab for registration
http://www.apple.com/quicktime/pro/unlock-mac_osx.html

When is the HomeFusion firmware upgrade and higher datacaps coming??

Similar Messages

Maybe you are looking for