When itunes opens my device dissappears from computer screen
When I open Itunes my ipod shuffle dissappears from computer screen
Hi 8206,
Welcome to the Apple Support Communities! It sounds like your iPod is appearing in Windows but not iTunes. There may be a couple of different steps you will need to go through to isolate what might be causing the issue and get it resolved. I suggest starting with number one in the following article, Try the iPod troubleshooting assistant. If necessary, continue with steps 2-10 if the issue remains unresolved.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
1. Try the iPod troubleshooting assistant:
If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
I hope this helps,
-Joe
Similar Messages
-
ipod wont pop up in itunes. asks to trust computer ***?
'Trust This Computer' alert on iPhone, iPad, or iPod touch
-
I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?
Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?
You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums. -
when I open a music file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?
If you use iTunes' default settings then when you add a file to iTunes it places a copy of the file in the iTunes media folder and it leaves the original in place. The exception is when you drag it to the Automatically Add To iTunes folder.
It does not convert the file. You can delete the original if you wish. -
Can anyone help me pls. , I deleted an app on my Ipod Touch, and It was deleted but when I connected my device on my computer and went to iTunes>"apps" , I still saw the app I deleted and it says "install" . Guys, how will I delete it permanently? May you Pls help me. Thanks
Just don't click install
-
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
when i open my i3tunes on my computer i get an error message telling me that iTunes has stopped working..the message is as follows...Microsoft Visual C runtime library Program C:\program files (86) iTunes\iTunes.exe R6025 -Pure virtual function call.. How do i fix this
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
When i connect my device to my computer it isnt showing up in itunes what do i do
when i connect my device to my computer it isnt showing up in itunes what do i do
its starts charging and the computer picks it up but doesnt show up in itunes
can anyone help
i have the iphone 5 and ipad mini and they both dont show up in itunesDevice not detected in iTunes for Windows
-
Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.<moved from Adobe Creative Cloud to Bridge General Discussion>
-
When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? I was told it will wipe when a new user opens the device.
No, it will wipe it when they try to connect it to a computer and set it up under their own Apple ID. When they turn on the device the first time without connecting it to anything they will be able to see the video.
-
My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe
LadySarah
You cannot upgrade from v6 to v7 without purchasing iLife 08.
Can you give more details about your crashing issue. Make of camera etc.,
You can start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD
Regards
TD -
Workflow/Automator to identify library when iTunes opens
Is there a way to use Automator/workflow to request which library to select when iTunes opens?
Here is my situation: I have 2 libraries one for me and one for my wife. My wife does not use a computer so I have not set up a separate user ID for her. Instead both libraries are under my user ID. Currently I need to select the "option" key when iTunes opens to request a library to open. Is there a way to use Automator/workflow to automate this process? I opened Automator but this is not one of the predefined items.
ThanksI have never heard of a way of dong this. If you're clever with computers you might be able to come up with a key comination or small automator app that does the equivalent of holding down the option key/alt key while clicking on the iTunes app, so you'd start iTunes with your own app, not directly.
-
When I open a pdf document from my dropbox to view it, the document appears blank, even though I know the information is actually there. This also has happened with pdf documents that have been e-mailed to me, then opened to view and they are blank?? Why are they showing up blank?
When I open emails with PDFs I click on the attachment (doing this all on my iPad) it gives me the option to "open in iBooks", I accept then after that the document is sucked into my iPad but I can't do anything with the PDF after that. Where is the actual file on my iPad? Why can't I email or send these PDFs to my cloud (Dropbox)?
It's like once they go into iBooks they're stuck forever.
Maybe you are looking for
-
How can I transfer contacts from an iPhone to a new iPad with another Apple-ID?
How can I transfer contacts from my iPhone to a new iPad with another Apple-ID?
-
In Visual C++ 6.0 SCardStatus Function
I use MFC library... in Smart Card Library, There is Function that name is ScardStaus... The function requires 7 parameters... sixth parameter ( LPBYTE pbAtr ) returns Card's ATR In my source ScardStaus returns SCARD_S_SUCCESS. That's meen is 'No pro
-
I installed the upgrade, from Thunderbird 24.6.0 to 31, and it would crash on the initial launch, so I tried it in safe mode, and with all the add-ins, tried clean install from the download site, all crash. OS X 10.9.4 (Mac). Anyone seeing this? Sugg
-
Keyboard Input and switch statement error
Hi, Below is a program to read an alphabet and check whether its a vowel/consonent using switch statement. Its always executin' the default stmt and not going into the case 1. This is because the ascii value of the character is being stored rather th
-
My object won't acknowledge the "new" command.
Okay I have this class called Die that is suppose to simulate a die with the added behaviour that it ceases to operate if 6 is rolled. But that problem is that when ever I try to declare multiple instances of the Die class with the new command the Di