When jobs are not posting it show error?

Hi All,
We have requirement, when particular jobs are not posting(E-recruitment), it should give a warning message.
Is it possible. If yes, Could you please advise.
Regards
BTM

Hi,
Please refer to http://scn.sap.com/thread/3453599.

Similar Messages

WOT and Webutation is showing as disabled when they are not

WOT and Webutation is showing as disabled when they are not .The icons show,but no color on icons. Says WOT is disabled when its not. Also the same on Webutation. Tried uninstalling then reinstalled both and the same thing happened. Tried Wot on another users account and theirs work. Can someone help me on these issues?

capaho wrote:
That's like saying a boat is an airplane because it's not a car.
SMH
In other words, how does your explanation account for ED (enhanced definition)?
ED is generally considered to be 576p or 480p, but this is not universally accepted and these resolutions are often accepted as HD also. Additionally an ED signal uses non square pixels just as SD does so the horizontal pixel dimensions should be no more than 720. Exactly how the tv would treat these resolutions I don't know (yet).
If you have a copy of the source code for the function that displays the HD icon, please post it so I can take a look at it.
Why should I have such a copy and why is it relevant. The issue here is that the OP believes his video is incorrectly labelled HD which is not the case. There may or may not be anomalies in the way the tv attributes the HD label to some files (although it isn't the case for me), however the OP has incorrectly converted his source video and they are no longer SD, they are also not ED by whichever definition you wish to apply and any such anomalies should they exist are not responsible for the OP's files being labelled HD.

Error messages are not posted into ECH using collect method

In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

Hi,
Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
CALL METHOD i_ref_registration->collect
   EXPORTING
     i_single_bo      = input
     i_component      = 'ZSWC'   "Software component defined while FEH customisation
     i_process        = 'ECH_BP' "ECH Business process defined while FEH customisation
     i_error_category = lc_errcat
     i_main_message   = wa_error
     i_messages       = lt_error
     i_main_object    = wa_object.
Here while populating the wa_object, the objtype field should be populated with the object type defined while FEH customization.
If all these things are done, then this should post the error.
Regards,
Abijith

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

I am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...can u pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

I recently had to get a new computer, my list of audible books is there but can't open because original file cannot be found. how do I find them or redownload them when they are not in my purchased list anymore?

I recently had to purchase a new computer, after doing so I no longer can open my audible books. the list is there, but I get an error message telling me that the original file cannot be found. How can I redownload them when they are not in my purchased list anymore when I go to the Apple Store??

Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

Job are not getting Triggered

Hi All,
I Have encountered an Issue with JOB not getting Triggered in BI system .
For Datasource 2LIS_04_P_ARBPL , I have created Infopackage , when I am going to schedule tab and running an Infopackage. Job is not getting trigger . And it is going on Hold for a longer period.
Data is in the source system and I am unable to fetch data from source system .
One more thing there was some upgration activity happened in the source system one day before.
Could u please let us know , Is the reason behind could be upgration in source system ?
Please let me know what needs to be crosschecked and what could be the solution for this Issue.
Looking for response .....
Regards,
Mahesh

Hi ,
In the Source system Data is fetching I mean through RSA3.
Even I able to replicate the Datasource as well.
Also in T-code : SM59 , when I am checking Source system Connection check , it is not poping any error.
But When I am Checking through RSA1 - > Source System
Source system connection by clicking CHECK Option then it is poping an error "Check Failed for RFC Connection ; Check Destination ".
Also In Source system T-code :SM50 I can see three BGD WP which are in waiting status.
In T-code : BD87 I have checked I didnt find any IDOC's in Yellow colour .
How do we need to check whether ALEREMOTE is active or not?
Actually my Issue is Jobs are not getting trigger in BI . So what all things needs to be taken care apart from this.
So Is there any thing to be taken care from Basis team for Restarting of BI Jobs after any kind of Upgration activity in general?
Regards,
Mahesh

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

Jobs are not disabled

Hi All,
I am trying to disabling the jobs but the jobs are not disabled.
'Alter failed for job' ' . The specified @job_id() doesn't exist. (Microsoft sqlserver error:14262)'.
Sqlserver 2005 standard edition (sp2)
windows server 2003 r2
Please anyone suggest about this issue resolution.
Thanks in Advance...

Hello,
Restart SQL Server Agent service and try again.
If restarting SQL Server agent does not fix the issue, please read the following Microsoft Support article too:
http://support.microsoft.com/kb/907739
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Jobs are not released

Hello Guys ,
STandard jobs are not released .can u please tell me the reasond???

Hi
Is this a new system or a copied system? Generally this happens in a copied system since the default server group still has the source system information and hence jobs will not run. Goto Txn SM61 and look for Job group. In the default list, you should see your server instance name. If it is showing any other name, just delete the entry and add the current instance to the list.
Hope it helps
Javed
Edited by: Javed Sapstar on Dec 27, 2010 9:41 AM

Jobs are not Runnig

Hi Experts
we are using Oracle 10g Database Release 2 on Server 2000 ,
Since a Month Jobs are not Running,
I Created the Jobs from Toad,
for the last one and Half years the Jobs were Running Fine
what could be the Cause for this Behaviour,
my Jobs Status is in online Status only but not Getting Executed
There is no Error i am finding ,
i need to Run the Job Manually Executing Every time
please Suggest
many thanks

Jobs are Runnig Prporperly running Manually,
please Find the out put for the Below Query
SQL>select job, schema_user, last_date, last_sec, next_date, last_date,last_sec, next_sec, total_time, broken, failures, what from dba_jobs
JOB SCHEMA_USER LAST_DATE LAST_SEC NEXT_DATE LAST_DATE LAST_SEC NEXT_SEC TOTAL_TIME B FAILURES WHAT
1 SYSMAN 07-JUNE-09 12:14:47 07-JUNE-09 07-JUNE-09 12:14:47 12:15:47 45084 N 0 EMD_MAINTENANCE.EXECUTE_EM_DBMS_JOB_PROCS();
4001 FLOWS_030100 07-JUNE-09 04:53:44 07-JUNE-09 07-JUNE-09 04:53:44 12:53:44 706 N 0 wwv_flow_cache.purge_sessions(p_purge_sess_older_then_hrs => 24);
4002 FLOWS_030100 07-JUNE-09 12:13:42 07-JUNE-09 07-JUNE-09 12:13:42 12:23:42 1661 N 0 wwv_flow_mail.push_queue(wwv_flow_platform.get_preference('SMTP_HOST_ADDRESS'),wwv_flow_platform.get_preference('SMTP_HOST_PORT'));
121 user_dml 06-JUNE-09 16:07:42 07-JUNE-09 06-JUNE-09 16:07:42 16:07:42 111 N 0 doclib.do_alert_todos;
122 user_dml 07-JUNE-09 12:12:42 07-JUNE-09 07-JUNE-09 12:12:42 12:27:42 1029 N 0 ctx_ddl.sync_index('doclib_docs_idx2', '2M');
184 user_dml 07-JUNE-09 00:00:04 08-JUNE-09 07-JUNE-09 00:00:04 00:00:00 19852 N 0 user_dml.CREATE_STC_CIRCUIT_PATH_DAILY;
201 user_dml 07-JUNE-09 00:00:04 08-JUNE-09 07-JUNE-09 00:00:04 00:00:00 92 N 0 user_dml.CREATE_STC_HELD_TX_REQUEST_DLY;
521 FLOWS_030100 04-MAR-09 15:30:30 0 N wwv_flow_mail.push_queue;
641 FLOWS_030100 13-JUN-09 12:21:35 0 N wwv_flow_mail.push_queue;
681 FLOWS_030100 15-JUL-09 12:32:49 0 N wwv_flow_mail.push_queue;
Thanks a lot

Error: "Transaction not posted due to errors in price determination"

Hello,
Please tell me why this error occurs "Transaction not posted due to errors in price determination"
for purchasing document.
I have checked the PO and it contains all the valid pricing details.
Then why the error?
Thanks & Regards,
Priyanka

Hai
Check ur Pur.Grp and the Vendor U are using some time u may be using the differrnt vendor grp and pur grp or pur org thru which the pricing procedure hets triggered
thnk u
with rgds
moosa anis

HT1430 I am trying to download IOS 6 but it is not completed , always showing error

I am trying to download IOS 6 but it is not completed , always showing error

I had the same problem after I gave my old iPad to my parents and tried to install Netflix. This is what you have to do: Open iTunes on your computer, the one you sync your iPad to. Then go to iTunes Store and search for and download Netflix app. After you download it, if your iPad is set to download new purchases it may start downloading on your iPad. If so, tap and hold to delete the app (because it is trying to install the new version on the iPad) Next step, go to the App Store on your iPad and find Netflix and it should say install since you already purchased it on the computer. Tap to install, and it will say the version is not compatible, tap to download a previous version. Click that and it will install the older version! One more thing, if and when you sync to your computer again it will say something like " Unable to install Netflix on your iPad" Just click the box to never remind you again, because it's trying to sync the newer Netflix app to your iPad, but it doesn't work so it displays the message. The old app will remain on the ipad. Hope this helps, good luck

When jobs are not posting it show error?

Similar Messages

Maybe you are looking for