When keying a green screen shot, the image being keyed goes a little out of focus when the effect is applied. How do you keep it sharp?

When keying a green screen shot, the primary image goes slightly out of focus when the effect is placed. What am I doing wrong??

Make a letterbox in Photoshop -two black stripes and a hole in the middle, place it on a higher video track.
Or download this: http://web.mac.com/andymees/Freeand_Easy/main/Entries/2008/1/23_Andy’s_Letterbox2.html

Similar Messages

When I insert a screen shot or image into the body of an email (not an attachment), why does it not show up after being sent? It works fine in other browsers.

The image will show up in the message when I am preparing it to send, but after being sent either it doesn't show at all or it comes through as a mess of characters.

try reinstalling iTunes.

When using video camera on iPad 3 screen keeps going in and out of focus

Every time I use my video camera the image goes in and out of focus making the blurry there seems to be no settings to stop this help.

At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

How do i use my own image with keying (or green screen)

how do i use my own image witrh keying (or green screen)

Put your sky clip on a layer below the clip you want to key. One or the other will be a connected clip. Apply the Keying filter to foreground clip (the one with the green screen). The green will be seen as transparent and the sky will show through as the BG. Adjust as necessary in the Inspector.
Good luck.
Russ

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

Hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. any one like me?

hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?

Anyone have any suggestions? or is everyone else just as clueless as me !

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)??? -And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

Changing the linked image for the Image Matte Key doesn't work

When I change the linked image for the Image Matte Key in Photoshop, the link does not change in my Premiere Pro CS6. Sometimes it takes 2-3 times going into the Image Matte Key setting and locating the new matte in Explorer (each time having to re-locate the folder that the matte is in) to see it within the premier monitor. Any suggestions?

Hi
The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
Default KC are Control Command +Arrow Left/right
Step 1: check you are using the correct key command :-)
CCT

When I create a PDF with Adobe Reader XI, it wont take the links behind the images. Sometimes he does, mostly not.. Whats the solution? The links in text do work!

When I create a PDF with Adobe Reader XI, it wont take the links behind the images. Sometimes he does, mostly not.. Whats the solution? The links in text do work!

Hello,
How can I give a answer back in the discussion on Adobe.com?
I don’t see any link?
1.      We have a subscription.
2.      Im converting a newsletter from the web to PDF.
3.      Sometimes I put a weblink behind the image in the newsletter. Most of the time PDF wont take the links behind the image.
Only the tekstlinks are OK.
[private data removed]

When I used mountain lion in a preview of a picture I could just press the icon that was a box with an arrow pointing up and that would allow me to share (message, email, Facebook, etc) the image. Now in Yosemite in preview if I click the box-arrow

When I used mavericks in a preview of a picture I could just press the icon that was a box with an arrow pointing up and that would allow me to share (message, email, Facebook, etc) the image. Now in Yosemite in preview if I click the box-arrow

Found my answer in another thread- this is what I did
GO to System Preferences > Users > Right Click on your Name > Advanced Options > and refresh your UUID
Restart your System and the widgets are all back
This solution worked fine for me!

Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lr5 when photo is transferred to photo shop

lightroom 5 make adjustments want to transfer to photo shop to make additional adjustments. how do you keep the adjustments made in lightroom 5 when photo is transferred to photo shop
I am not able to keep the changes made in light room when I transfer to photo shop

Something you need to understand. Unless you are using the latest version of Photoshop Elements, it's possible that some of the adjustments that you make in Lightroom won't transfer to Elements if you choose the option to open anyway. If you choose the option to edit a copy with Lightroom adjustments then Lightroom will create a TIF or PSD file (depending on your preferences), and that file will include all of the adjustments that you have made using Lightroom. Then you can finish your work in Photoshop Elements.
The process of transferring an image from Lightroom to Photoshop or Photoshop Elements involves the Camera Raw plug-in. It has to be used to interpret the Lightroom adjustments and apply those adjustments to the image after it has been converted. Files open in Elements or Photoshop or no longer raw images because those programs are incapable of editing raw image data. I don't know if this will help you in this situation. Feel free to ask if you have more questions.

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

When keying a green screen shot, the image being keyed goes a little out of focus when the effect is applied. How do you keep it sharp?

Similar Messages

Maybe you are looking for