When laptop wakes up there are horzontal lines then they go away. New issue.
When my 2011 MacbookPro turns on or wakes up there are horizontal lines for a few seconds and then it goes away. Anyone know why or how to solve? Thanks in advance!
Please make a Genius Appointment and take it in for service.
Similar Messages
-
A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHeroIf you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else ) -
after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?
Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
when I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines
Hi Vickey, S,
Sorry for the delay in response. Is it happening with all the files?
Also, please write the steps you are taking to type in the document.
You might try uninstalling and re installing the Reader in case it is happening with all the files.
URL to install the Adobe Reader is Adobe - Adobe Reader download - All versions
Thanks,
Vikrantt Singh -
I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!
You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts. -
My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
how do I make these lines leave so the phone can function as it shouldJ-dag97 wrote:
My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
how do I make these lines leave so the phone can function as it should
Take it back to whomever changed the housing. -
When I use messaging there are only two users who automatically go green (MMS?), and are undeliverable. I can't seem to change this. What am I doing wrong?
I use message and all other messages are non-sms. When I try to message these two accounts, they automatically use sms, everything I do is the same. The non-sms messages go through just fine (including pictures). The sms messages (no pictures) are always rejected; they have never gone through. They have never been able to send messages to me either (although they can send to others). I have a Verizon cellular data plan.
-
When I close Firefox, there are two underlying windows that I have to close every time. How do I get rid of them for good and prevent this from continuing to happen. Both windows were opened by me during viewing at some point, so they did originate from me.
Thanks for any help you can give me!The Safe Mac
The Safe Mac » Adware Removal Guide Genieo
Thomas Reed's Mac Malware Guide
AdwareMedic
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Mac Virus Malware Info
MacBook Pro -
There is no line in audio on the new Macbook Pro ?
Hi,
I just got my new Macbook pro (Retina with 16gb). I'm surprised because i don't see the option for adjust in/out audio ? There is no line audio in on the new macbook pro ?
ThanksTo the best of my understanding from reading many posts on here, the best answers I can come up with to your questions are as follows:
Verizon is supposed to be upgrading its signal format for several of its HD channels that will prevent your old box from decoding them. This is why they are upgrading you to a new box. As for the 7100-P2, Verizon was attempting to make a smaller, more sleek-looking and energy efficient STB. While I could be wrong about this next statement, I believe that this model could also be set either flat or on-end (like a book). If you set this box on-end then the clock display would have been very hard to read. There is no software update that can fix this issue because there is no LCD display on the front of the box to display the numbers. And yes, there are complaints all over these forums regarding the lack of clock display on this model. It would have served Verizon well to have consulted with its customers before making this change.
There are 2 other models of HD STB that can receive the new signal and have a front-panel clock display. But unless you have a Verizon FiOS store nearby that would be willing to let you swap for one of those, requesting another exchange for your functional 7100-P2 may or may not be free. And you could just end up with another 7100-P2.
Hope this helps.
Find this post helpful, informative or just something you agree with? Click the red ‘thumbs-up’ button.
Did this post solve your problem? Click the green ‘Accept as Solution’ button. -
Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not
Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not. There are hundreds of what it thinks are duplicates. How can I get it to let me put them all into a folder and create unique names? If I do one file at a time, it gives me the option to keep both files. But not when I am moving hundreds at a time.
A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time. -
I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!
You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store
-
i have lost my iphone 5 the day before yesterday,and have tried many ways to find it, but in vain. i wandered if there are some useful solutions to such kinds of issues, because lots of people have similar terrible experiences. in china many people have lost ihones, which means you also expose all of your information you have saved in iphones. this is dangerous,because criminals can take advantage of those information. i think apple should talke more measures to stop the thieves from using apples so easily.
cuz me too same case I have also I lost all my photos 800pics
-
need help with sync to my phone I sync but only a few ring tones show up then they go away when I try to sync more. how do i sync and them stay?
Your problem is that everyone seems to be using the same iTunes store account (ID). That's fine when a family wants to share purchased items, but that's the rub - everyone is tapping into the same account, so they can download whatever is available.
As for icloud accounts, icloud is designed for single user use. If multiple users share the same icloud account then all their devices will be synced together - same emails, same contacts and calendars, same notes, etc. There is no privacy or division of data in this scenario. The usual advice is for everyone to have their own ID for icloud, and share the family ID for iTunes store. -
When connecting with FaceTime, I see other people then they hang up.
When connecting with FaceTime, I see other people then they hang up. Has anyone one else encountered this?
Usually, my wife contacts me with facetime, I try to accept connection and she sees other people form another country that quickly hang up.
This happens often.
ThanksThis seems to happen with the Iphone 5s if I am not mistaken
Thnaks -
I've completed my video slide show but there are vertical lines 6.0.3
I used overlap transition between all still photos. I noticed that the resolution goes down to 117k (can this be increased?) when I bring in the large mb stills. Everything is smooth but the lines. I have created this over and over. Ultimately I want to create an instant play DVD but have trouble with iDVD is forcing me to use a lame title page with stupid music. PLEASE HELP!!
Is the problem occurring in iMovie or iDVD?
If iMovie, give this basic remedy a try. Quit iMovie and delete your iMovie preferences. To do this, go to your username> library> preferences> com.apple.imovie.plist. Delete this file. Then reopen iMovie; it will create a new preference file with all of the default settings.
If iDVD, do the following for troubleshooting purposes. While working on your project in iDVD, create a disk image. Go to File>Save as disk image. This will create a file that can be viewed on your computer's DVD player. You will be able to see just how your project will work when viewed on a regular DVD player. You will be able to catch errors and correct them before burning and possibly wasting a disk. If the disk image plays correctly, then you know that the encoding is being done correctly. This would point to problems with the burn process. If there are problems with the disk image, then the issue is with encoding.
Message was edited by: Glo H
Maybe you are looking for
-
Getting error while invoking relational physical DS for sybase stored proc
*com.bea.dsp.das.exception.DASException: com.bea.dsp.wrappers.rdb.exceptions.RDBWrapperException: {bea-err}RDBW0004: Error executing SQL query: [BEA][Sybase JDBC Driver][Sybase]SELECT INTO command not allowed within multi-statement transaction+.* I h
-
Change Due date of Retention Document
Hi, I have posted one Retention document through MIRO & put some due date. Now I want to change this Due date (Baseline payment date) in FB02, but in the line item I am not able to see that field. It is showing in FBL1N, but as I click on change docu
-
Hi, I am using 11g. I need to perform complex transformation logic on my incoming message to transform it to outgoing message. I have been trying to do this via the XSL mapper without success. I was reading about Xquery and I have the following quest
-
Netopia 4686XL USA Public IP address to Linksys WRTU54G-TM for Netflix USA IP
I have a stack of public IPs on my Ethernet router Netopia 4686XL which is on a T1 connection in USA, I have multiple Linksys routers model WRTU54G-TM(T-Mobile @Home Router) Which I use as router at various locations other than my office. I would lik
-
We currently have a PDF of our new patient forms on our website for patients to print off, fill out, and bring to their appointment with them. We've had way too many patients go through that process but then forget to bring the paperwork with them.