When left screen goes white when click on any tab

If i leave any tab for a while then click on it all firefox 4 goes white

Similar Messages

Samsung S5- Screen Going White when I Click on Pics

In Facebook app, I attach photos, then click on the photo to tag and it appears for a second and then the screen goes white-gray and then goes back to the status (the post), or, it doesn't even allow me to pull up the photo goes straight to the white-grayish screen, pauses, and back to the post, sometimes just deleting the post completely. This was working prior to today just fine. I have uninstalled and re-installed FB, and restarted the phone. I need this for work so I am in a bind, any help is appreciated!

Yup you can do that JennAG pulling the battery then holding in on the Power button while the battery is out is a Form of resetting a Device many of the older Androids that had batteries that you could pull out, you could then power cycle the phone) But when the Sealed back style of phone came out power cycling methods had to change a bit on some Devices you hold the Lower Volume and the power button some you hold the upper Volume and the Power and on some you can just hold the Power button it self allot different ways..
But on your s5 puling the Battery leaving it out for 10 min & holding in on the power button for 20 sec. you'll be Fine b

When i view my itunes store, it comes up then screen goes white., when i view my itunes store, it comes up then screen goes white.

i cant seem to go on my itunes store without it dissaperaing or making a purchase because the screen always goes white. ahhh what to do?

I was struggling with this since my latest Itunes update. Fiirst it would not recognize my IPad as a device, after correcting that, it would list the Ipad in my device but my Sync had no options (summry, info, etc). and it kept saying it was "Accessing Itunes store". reading your question I suddently tried deleting the itunes task (alt-ctrl, delete, processes) and delete Itunes. (By the way, I had rebooted my computer several times over the last few days). I opened up Itunes, and voila. Device is there. No "accessing windows" and my sync has the normal options.
****..feels good to actually write an answer rather than writing a questions.
Eman

What happens when the screen goes white in the iphone?

My i phone 3G was working fine, suddenly the screen went white and stop working. I managed to turn it on again and see the it was almost out of battery, so I charged it all night long, however it is completely blank and I can't even turn it on. After the screen went white, It has not shown any signs of charging, nor working. Has any body experience something similar? Please help

My i phone 3G was working fine, suddenly the screen went white and stop working. I managed to turn it on again and see the it was almost out of battery, so I charged it all night long, however it is completely blank and I can't even turn it on. After the screen went white, It has not shown any signs of charging, nor working. Has any body experience something similar? Please help

What is happen when the screen goes white

what is happen when the ipod screen is going blank

what is happen when the ipod screen is going blank

Iphone 3gs screen goes blank when it rings/gets a text

My iphone screen goes white when i get an incomming call. I can answer it if i slde my finger across the general area where the answer switch will be.
In order to view the screen after the iphone has locked I have to hit the home button followed by the power button 3 times.
Does anyone know if this can be fixed? If not will i be able to get a replacement. I'd be willing to pay as its out of warranty?
Thanks in advance for any help you can give me!

Remove your case and see how it works. It may be blocking the proximity sensors that turn the screen off/on during a call.
Message was edited by: paulcb

Screen turns white when someone calls

My iPhone screen turns white occasionally when I turn the phone on--not a big deal becaus I just turn it off and on again using the power button BUT sometimes someone calls and the screen turns white! There is no possibility to answer because the screen goes white immediately and so I miss the call! To make matters worse I don't have caller ID and so I don't know whose call I missed.
Is this software or hardware? How to fix!!!

Apple said they would replace it--but it seems when they replace your phone you DON'T get a NEW one!! They use refurbished ones from the factory that have been rejected initially and then they get "refurbished" and pushed out. . .that kinda *****! I am almost tempted to keep the one I have and get caller ID so I can just figure out who called when the screen goes white and i can just call them back.

Computer says almost out of disc start up space the. Screen goes white after signing in. How do I clear space so I can sign in?

I get a message that says low disc space for start up when I go to sign in. After I do sign in the screen goes white. Is there any way to delete items so I can sign in and clear more disc space. I don't want to lose everything and apple is not covering a tech call.

Start up in Safe Mode http://support.apple.com/kb/HT1564

I have firefox 4 installed. when i go to one web page everything is fine; but, when i try and go to another my screen goes white and i have to restart my computer to be able to go to anyh other web page

when i go to a website and try and go to another the screen goes white and nothing ever happens. i have firefox 4 installed

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

I get a 3914 error when I try and restore my iphone 4. my screen goes white and then all different colors. what should I do?

i get a 3914 error when i try and restore my iphone 4. my screen goes white and all different colors what should i do

first try a different usb cable, remove all other usb devices, and try a different port in back on desktops if possible. if no luck see these
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

I have an apple Iphone 5s and i'm facing a problem. Sometimes when i unlock my phone with passcode or finger tip my screen goes white around the corners. Please advice what kind of issue is this.

Sounds like a hardware issue. Bring the phone to Apple for evaluation.

When I turn on my ipod touch the screen goes white and stays white.

When I turn on my ipod touch the screen goes white and stays white. It plays but all I see on the screen is white. I cannot change anything.

It iTunes is asking to enter the passcode then:
- A data recovery company may be able to help
- Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

My screen goes blank when receiving or making calls.

My screen goes blank when receiving or making calls. Cannot get back to the tiles window until the other party hangs up.

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

When left screen goes white when click on any tab

Similar Messages

Maybe you are looking for