When loading the program, the loading, circular icon will not stop. It seems like it is trying to load and can't. Since Adobe tech support won't help with version 13, I need your help.

I just bought this and was trying to load it for the first time and the circular icon just keeps flashing like it is trying to load and can't. Most elements come up but I am wondering why it is still flashing like it is trying to load.
At times, the drop down menus will not stay up. When I click on them, they flash and then disappear.
This is not a blank message.

Not the help you're looking for -- sorry -- but I'm fighting a battle with Adobe tech support, too. They won't help me with an issue involving using the program, but their site seems to indicate that tech support is available for download, install, & setup. Check page: https://helpx.adobe.com/contact/what-contact-options.html and try calling them again. Good luck!

Similar Messages

HT5787 Hi, I forgot my icloud password and my ipodtouch keeps asking me for my icloud password. When I enter my apple ID password, it will not accept it. I have been trying to find where I can reset my icloud password with no success. Please can someone

Hi, I forgot my icloud password and my ipodtouch keeps asking me for my icloud password. When I enter my apple ID password, it will not accept it. I have been trying to find where I can reset my icloud password with no success. Please can someone help?

You reset the iClould password the same way you reset the Apple ID for the email address/account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

Mail will not stop loading, twirling rainbow icon will not stop, cannot close mail application then.

Just downloaded OS X Mountain Lion and on my Mac Book Pro (mid 2009). When I select the mail application this problem occurs: the rainbow icon that twirls will not stop, and then I cannot close the mail program at all. No clue what to do next, thanks for the help or ideas. SanibelMan 09/09/2012 @ 2am EST.

Click on the apple in the top left corner of the computer. If it doesn't let you, open another application such as finder, and then click it, then go down the force quit, then click mail and then press force quit.

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

Can anyone help me, I am trying to create courses using Captivate for Udemy, but even after saving the courses as pdf files, Udemy will not reconize them. NOw I am back to square one because according to Udemy techs, they do not support Captivate files.

Trying to create my courses using Adobe Captivate, but even after saving the files as a pdf it will not upload in Udemy. What can I do?

Yep, you lose all interactivity when publishing to video.
Udemy, Lynda.com, Total Training and other similar models are based on simple "watch the video to learn" type of consumption. The only real interactivity you get is an ability to pause, rewind, fast forward. Basically anything you can do with a video.
Cheers... Rick

When I turn my iPod Touch on it will not stop displaying the USB cord plugging into iTunes. What could be wrong?

When I turn on my iPod touch it will not do anything except display the image of the USB cord plugging into iTunes. What is the problem?

It is telling you to connect the iPod to your computer and restore via iTunes
iTunes: Backing up, updating, and restoring iOS software

Dock icons will not stop running

The icons on my dock will not stop running. They have the small blue light under them when in use but the light does not go off when I close the program. I have been quitting them by holding down the curser on the icon until menu comes up to quit. Help, please. Thanks, Arudi

yup. bizarre. logged out of MobileMe and I try to move the Keychain Icon from the third on the left to the last on the right and -whoooo-oop - it slides back to the left. no fun. like having a gremlin moving books around in my library or something...

I cannot open premiere elements. i get a message saying that the program is initializing but it will not open. I uninstalled and reinstalled twice. It is a new program dvd.

I installed premiere elements but i cannot open it. i get a message saying that the program is initializing but it wont open. it is a new program. i uninstalled and reinstalled it twice with the same result.

if you see an error message, post a screenshot (if it's in english) or a quote of it (if it's not).
otherwise, reset your preferences -
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.

Recently firefox presents a screen on startup regarding plugin updates. I tried to disable the feaute in the advanced options page but it will not stop

Firefox will not allow me to turnoff the automatic update feature for plug-ins. On startup it presents a screen and searches all my plug-ins looking for updates.

See [/questions/833058]

IChat icon will not stop bouncing

Hello all
Here is my problem ....
I startup IChat and when I go to another program the icon continues to bounce on the dock.
All settings are set to not bounce.
Please help with the very annoying problem
Thanks Mark

Hi,
Re 1)
Sometimes the apps or items listed as Login Items (System Preferences > Accounts > Your account > Login Items) can start up faster than some parts of the OS.
It is more noticeable with waking from Sleep.
Sleep (Set in the System Preferences > Energy Saver) is what happens if the computer is set to "Spin Down" after a certain amount of time.
This cuts all network Connections and on waking, re-establishing these can be slower then the apps that are open also waking leading to the app reporting no network.
Sometimes deleting the said App and re-adding it to the list will place it lower in the list and later in the Start up order (not always successful with faster processors)
Sort of 1b)
Do you have the Buddy list viewable on this Start up ?
If the Buddy List is Logged in but has had the Red Button used to hide the window iChat will tend to remember this at the next launch - the App Starts and the Buddy List is logged in (See iChat Menu > Accounts and and the Window Menu) but the buddy List's actual Window is not on view.
Re 2)
At this point is there any message popping up about iChat ?
If several apps have opened other windows in front of iChat (iChat is not the app listed in the menu Bar - not "front") then you may need to make iChat the "Front App" and check it's Window Menu at the bottom to see if it lists anything.
It may also pay to use the Amber button on all other windows (puts things in the DOCK so you can see any Alert.
Does clicking the icon bring the iChat app to the Front (Listed in the Menu Bar) ?
Re 3)
As you can see I suspect other things before we get this far.
Summary.
I still think iChat wants some Input to resolve an issue it has.
I have explained some possibles based on the new information - where iChat is in the Start Up process as a whole and if the Buddy List Window is Hidden, plus whether iChat and any message Alert is Fully "Front".
I have suggested that iChat be "lowered" in the Login Items list by removing it ad re-adding it.
A better test would be to take it out and see if it does it on a manual start.
I have suggested checking whether iChat is the "Front"/Menu Bar listed app and whether other windows are hiding a Alert Pop Up message.
NOTES.
I have this or something similar with Mail and iChat sometimes.
One or other will lose connection with the server and request I fill in the Password pop up that occurs.
Mail indicates the account in question with an icon.
This icon will go away for a few seconds even if you type in the wrong password.
iChat does not have such a visual clue.
In both cases if either app cannot connect to the server then the pop up comes back and the icon bounces again.
You did not say one way or the other about any pop up Alert message.
Try to remember I cannot see every mouse move, head nod, hand wave at the Screen you would use if I were sat there.
Imagine that you are telling your mother what you see over the phone as you do it.
Better still imagine I want as much detail as you would give to someone who has never used a phone before.
(I know it's pedantic )
10:13 PM Saturday; May 8, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Please help my firend!i need your help!

i am a chinese developer .as you see ,my English is very bad..
i have some big problems this days.
http://www.thetechlabs.com/tutorials/3d/create-in-flex-a-3d-image-gallery-using-actionscri pt-30-and-alternativa3d/
go to this link , you will find a souce code which developed by flex.
i have downloaded it and try to run it .But i really have much problem.
i try do these steps:
1 download source code.
2 create a new project
3 download the Alternativa 3D folders.
4 properties -buildpath-add Alternativa 3D folders in project
5 copy the code from sourcecode to the new project
6 run appliaction
failed.
or
1 import the project which i downloaded.
2download the Alternativa 3D folders.
3 properties -buildpath-add Alternativa 3D folders in project
failed.
how can i do?
i mean,when i want to run a appliaction which i downloaded and need as3 folder like
"green sock" or "Alternativa 3D"
i dont know how to operate.
could help me and tell me details.their have less                          tutorials in china.i should study from goole.but it is hard for me to read English documents.
help me my firends,thank you

In the future, rather than just saying "failed", it will be more helpful if you explain exactly how it failed.
When I tried it, I got compilation errors in Photo.as that the gs.TweenMax could not be found. Googling "gs.TweenMax" led me to the page
http://www.greensock.com/tweenmax/
where I downloaded greensock-as3.zip. This Zip file contained a SWC, greensock.swc, which I added to the project's 'libs' folder (alongside the Alternativa3D SWCs). This didn't fix the compilation error, so I checked the catalog.xml file inside greensock.swc (which is just a renamed Zip file) to see if there was a TweenMax class inside. There is, but it has been renamed to com.greensock.TweenMax. When I changed the line
    import gs.TweenMax;
in Photo.as to
    import com.greensock.TweenMax;
it compiled and ran. So there were two problems:
1. The Alternativa libraries are relying on a free Greensock library that you needed to also have. (This was probably explained somewhere on the Alternativa site.)
2. The Greensock library that Alternativa is expecting appears to be out-of-sync with the one available on the Greensock site.
Gordon Smith
Adobe Flex SDK Team

Problems with my eMac. NEED YOUR HELP!

Hai,
I'm new right here, and i'm not very good at english, but I have problems with my eMac so I hope that someone can help me!
When I boot my Emac there's a screen that says:'
'to continye booting, type 'mac-boot' and press return.'
When I typed mac-boot I pressed enter(because I don't know the return-button) and then I get this screen:
'panic(cpu0): Unable to find driver for this platform: PowerMac6,4'
and other text with a lot of numbers.
Also in that screen stands:
'you need to restart your computer. hold the power button for several seconds or press the restart button'
I hold the power butten for several seconds and I put the computer on again, but than I'm getting the same texts&things.
So, can anyone help me, or do I have to go to the Macstore?(Does anybody know how much that costs?)
Thanks for reading& maybe helping!
Kisses from Amsterdam!

There are so many unknowns here it is hard to know the right advice to give.
+I didn't get any disks with it. Do you know if I can buy them somewhere?+
You may be able to get 10.4 Tiger disks from an Apple store, but that depends on where you live. Apple usually only sells their latest OS which is currently 10.5 Leopard, but I would think your eMac would be best with 10.4 Tiger. If you can get them from an Apple store, ask if they give a student discount if you are eligible as that can be a saving.
Normally every Mac, _new or used has its own disks,_ including an Apple Hardware Test CD. These disks are useful if you want to reinstall your operating system, but also useful for diagnostics and and some software repairs. The thing is, you could get hold of some disks and still find your machine has something broken in the hardware, and you will have spent money on the disks for nothing.
It would be better to determine if the computer is fixable before you purchased any OS disks.
Do you know anyone with an Apple computer who has some disks you could borrow? Or do you know someone who has an iBook which you could use in
FireWire target disk mode to connect the two together , and use the Disk utility in the iBook to run a test on your hard drive.
Even without a disk, you could still try starting up your computer in single user mode and perform some of the steps in this article.
http://support.apple.com/kb/TS1411?viewlocale=en_US
which assumes you have 10.3.9 which you may have seeing as it is an old computer.

Report with Two Queries -- Really need your Help Guys

I might be posting duplicate thread but i couldnt found the Q&A that i am looking for.
I am trying to create a report where i have to use two query. Also, with this query i am passing parameter where i ask user to enter Report Month so they can run report by what ever month they want to see data.
Now my Q_2 is duplicate or Q_1 because in my final report layout i have to display fields where i have to compare current_month_data to Previous_month_data. so basically i want user to in put current month date and previous month date and layout look like.
Company_Name Currentmonth_sale previousMonth_Sales ....
Honda $1423.42 $324.42
Toyota $3433 $4255.45
so on....
Now so far i create report manualy and drop two query in to the report but when i trying to create Report Wizard and group by each Company.. it is not giving me the out put that i want. Instead of giving me above out put its give me my Q_! result with each company group and then under that result i have Q_2 result.
so HOW CAN I DISPLAY FIELDS FROM MY Q_2 WITH MY REST OF THE FIELD ON Q_1?????????????????????????
Thank You guys.

Actually, I tried to use Data Link but i am not able to success.
Let me know if I am doing anything wrong . i click on left hand side tool panel where its says DATA LINK. then i click on Q_1 field and then drag the mouse over to Q_2 query with same field name. but its give me an error that Can not link it because of Group data and i have option to choose Yes, NO or Cancel.
Let me know what are the step i need to take in order to link this two queries.
Thank You
keyun

The wi-fi on/off icon will not work since the os 7.0 upgrade last weekend. How do I get the switch to work again?

Wi Fi switch under settings stopped working after OS 7 upgrade last weekend. I am not connected to home wifi and system is off. Any suggestions?u

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Badge on phone icon will not clear

Since upgrading my iPhone 4 to iOS 5 the badge on my Phone Icon will not clear, it shows up with no number in it and shows on the home screen icon as well as on the voicemail tab inside the phone app. I have tried a reset, turning the badge settings on and off again, quitting the phone app and NOTHING works.

Hi there Sean.
Yes this is a problem with the Sim.
I've only ever seen this from orange with regards to this particular model of handset.
If you take your phone to you rnearest orange shop and ask them to supply you with a new sim card then im pretty sure that will solve your problem.
The staff will probably tell you otherwise and ask you to take it to a CNSP but be firm.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

When loading the program, the loading, circular icon will not stop. It seems like it is trying to load and can't. Since Adobe tech support won't help with version 13, I need your help.

Similar Messages

Maybe you are looking for